Electrolytic Cells - MCAT Chemical and Physical Foundations of Biological Systems

For electrolytic cells, the cell potential is negative; in contrast, galvanic/voltaic cells have positive cell potentials. Electrolysis reactions can only occur if the total potential is positive. An additional voltage input, such as a battery, is required so that the sum of potentials in the electrolytic cell is greater than zero.

Oxidation always occurs at the anode, regardless of cell type, and electrons always travel toward the site of reduction (the cathode). In a galvanic cell, the cathode is positively charged, naturally drawing the flow of electrons. In an electrolytic cell, the cathode is negatively charged, but still requires the flow of electrons to allow reduction to occur. An induced current from a battery is used to propel these electrons against their natural flow.

Electrolytic cells have a negative electromotive force and require an outside energy source to power a non-spontaneous reaction. Galvanic cells, in contrast, have positive potentials and facilitate spontaneous reactions without the need of a power source.

Regardless of cell type, however, oxidation always takes place at the anode and reduction always takes place at the cathode. The flow of electrons is always from the anode to cathode.

Electrolysis is a specific type of reaction that occurs in an electrolytic cell. An electrochemical cell contains an anode and a cathode that facilitate a redox reaction. In an electrolytic cell (a type of electrochemical cell) the redox reaction that is carried out is a nonspontaneous reaction. Recall that the change in Gibbs free energy for a nonspontaneous, or unfavorable, reaction is always positive; therefore, for electrolysis in an electrolytic cell, the redox reaction has a . Statement I is false.

Nonspontaneous reactions are reactions that are unfavorable. This means that energy is required to carry out the reaction. In an electrolytic cell, energy is provided in the form of voltage input. The voltage provided pushes the reaction in the unfavorable direction; therefore, electrolysis reactions require a voltage source. Statement II is true.

Since it requires energy, an electrolysis reaction is considered to be an endothermic process. Recall that endothermic processes are reactions that take in (or require) energy, whereas exothermic processes are reactions that release energy; therefore, electrolysis is an endothermic process. Statement III is false.

The question states that the reaction has a negative ; therefore, the reaction is nonspontaneous. Nonspontaneous reactions are carried out in electrolytic cells (as opposed to galvanic cells). A reaction usually proceeds in the spontaneous direction; therefore, to carry out nonspontaneous reactions you must put energy into the system. Without energy, the reaction shown will occur in the reverse direction.

In an electrolytic cell, energy is provided by an external voltage source. Without energy, the electrolytic cell will have a voltage of and the spontaneous (reverse) reaction will occur. For the nonspontaneous reaction to occur, you must attach a voltage source in such a way that the voltage applied is greater than and is applied in the opposite direction (nonspontaneous reaction direction). This will force the reaction in the reverse direction and the nonspontaneous reaction will occur; therefore, the external voltage source must provide a voltage greater than .

Electrolytic cells require an input of energy, and are used to plate metals by functionally running a voltaic cell in reverse.

For electrolytic cells, the cell potential is negative; in contrast, galvanic/voltaic cells have positive cell potentials. Electrolysis reactions can only occur if the total potential is positive. An additional voltage input, such as a battery, is required so that the sum of potentials in the electrolytic cell is greater than zero.

Oxidation always occurs at the anode, regardless of cell type, and electrons always travel toward the site of reduction (the cathode). In a galvanic cell, the cathode is positively charged, naturally drawing the flow of electrons. In an electrolytic cell, the cathode is negatively charged, but still requires the flow of electrons to allow reduction to occur. An induced current from a battery is used to propel these electrons against their natural flow.

Electrolytic cells have a negative electromotive force and require an outside energy source to power a non-spontaneous reaction. Galvanic cells, in contrast, have positive potentials and facilitate spontaneous reactions without the need of a power source.

Regardless of cell type, however, oxidation always takes place at the anode and reduction always takes place at the cathode. The flow of electrons is always from the anode to cathode.

Electrolysis is a specific type of reaction that occurs in an electrolytic cell. An electrochemical cell contains an anode and a cathode that facilitate a redox reaction. In an electrolytic cell (a type of electrochemical cell) the redox reaction that is carried out is a nonspontaneous reaction. Recall that the change in Gibbs free energy for a nonspontaneous, or unfavorable, reaction is always positive; therefore, for electrolysis in an electrolytic cell, the redox reaction has a . Statement I is false.

Nonspontaneous reactions are reactions that are unfavorable. This means that energy is required to carry out the reaction. In an electrolytic cell, energy is provided in the form of voltage input. The voltage provided pushes the reaction in the unfavorable direction; therefore, electrolysis reactions require a voltage source. Statement II is true.

Since it requires energy, an electrolysis reaction is considered to be an endothermic process. Recall that endothermic processes are reactions that take in (or require) energy, whereas exothermic processes are reactions that release energy; therefore, electrolysis is an endothermic process. Statement III is false.

The question states that the reaction has a negative ; therefore, the reaction is nonspontaneous. Nonspontaneous reactions are carried out in electrolytic cells (as opposed to galvanic cells). A reaction usually proceeds in the spontaneous direction; therefore, to carry out nonspontaneous reactions you must put energy into the system. Without energy, the reaction shown will occur in the reverse direction.

In an electrolytic cell, energy is provided by an external voltage source. Without energy, the electrolytic cell will have a voltage of and the spontaneous (reverse) reaction will occur. For the nonspontaneous reaction to occur, you must attach a voltage source in such a way that the voltage applied is greater than and is applied in the opposite direction (nonspontaneous reaction direction). This will force the reaction in the reverse direction and the nonspontaneous reaction will occur; therefore, the external voltage source must provide a voltage greater than .

Electrolytic cells require an input of energy, and are used to plate metals by functionally running a voltaic cell in reverse.

For electrolytic cells, the cell potential is negative; in contrast, galvanic/voltaic cells have positive cell potentials. Electrolysis reactions can only occur if the total potential is positive. An additional voltage input, such as a battery, is required so that the sum of potentials in the electrolytic cell is greater than zero.

Oxidation always occurs at the anode, regardless of cell type, and electrons always travel toward the site of reduction (the cathode). In a galvanic cell, the cathode is positively charged, naturally drawing the flow of electrons. In an electrolytic cell, the cathode is negatively charged, but still requires the flow of electrons to allow reduction to occur. An induced current from a battery is used to propel these electrons against their natural flow.

Electrolytic cells have a negative electromotive force and require an outside energy source to power a non-spontaneous reaction. Galvanic cells, in contrast, have positive potentials and facilitate spontaneous reactions without the need of a power source.

Regardless of cell type, however, oxidation always takes place at the anode and reduction always takes place at the cathode. The flow of electrons is always from the anode to cathode.

Electrolysis is a specific type of reaction that occurs in an electrolytic cell. An electrochemical cell contains an anode and a cathode that facilitate a redox reaction. In an electrolytic cell (a type of electrochemical cell) the redox reaction that is carried out is a nonspontaneous reaction. Recall that the change in Gibbs free energy for a nonspontaneous, or unfavorable, reaction is always positive; therefore, for electrolysis in an electrolytic cell, the redox reaction has a . Statement I is false.

Nonspontaneous reactions are reactions that are unfavorable. This means that energy is required to carry out the reaction. In an electrolytic cell, energy is provided in the form of voltage input. The voltage provided pushes the reaction in the unfavorable direction; therefore, electrolysis reactions require a voltage source. Statement II is true.

Since it requires energy, an electrolysis reaction is considered to be an endothermic process. Recall that endothermic processes are reactions that take in (or require) energy, whereas exothermic processes are reactions that release energy; therefore, electrolysis is an endothermic process. Statement III is false.

The question states that the reaction has a negative ; therefore, the reaction is nonspontaneous. Nonspontaneous reactions are carried out in electrolytic cells (as opposed to galvanic cells). A reaction usually proceeds in the spontaneous direction; therefore, to carry out nonspontaneous reactions you must put energy into the system. Without energy, the reaction shown will occur in the reverse direction.

In an electrolytic cell, energy is provided by an external voltage source. Without energy, the electrolytic cell will have a voltage of and the spontaneous (reverse) reaction will occur. For the nonspontaneous reaction to occur, you must attach a voltage source in such a way that the voltage applied is greater than and is applied in the opposite direction (nonspontaneous reaction direction). This will force the reaction in the reverse direction and the nonspontaneous reaction will occur; therefore, the external voltage source must provide a voltage greater than .

Electrolytic cells require an input of energy, and are used to plate metals by functionally running a voltaic cell in reverse.

For electrolytic cells, the cell potential is negative; in contrast, galvanic/voltaic cells have positive cell potentials. Electrolysis reactions can only occur if the total potential is positive. An additional voltage input, such as a battery, is required so that the sum of potentials in the electrolytic cell is greater than zero.

Oxidation always occurs at the anode, regardless of cell type, and electrons always travel toward the site of reduction (the cathode). In a galvanic cell, the cathode is positively charged, naturally drawing the flow of electrons. In an electrolytic cell, the cathode is negatively charged, but still requires the flow of electrons to allow reduction to occur. An induced current from a battery is used to propel these electrons against their natural flow.

Electrolytic cells have a negative electromotive force and require an outside energy source to power a non-spontaneous reaction. Galvanic cells, in contrast, have positive potentials and facilitate spontaneous reactions without the need of a power source.

Regardless of cell type, however, oxidation always takes place at the anode and reduction always takes place at the cathode. The flow of electrons is always from the anode to cathode.

Electrolysis is a specific type of reaction that occurs in an electrolytic cell. An electrochemical cell contains an anode and a cathode that facilitate a redox reaction. In an electrolytic cell (a type of electrochemical cell) the redox reaction that is carried out is a nonspontaneous reaction. Recall that the change in Gibbs free energy for a nonspontaneous, or unfavorable, reaction is always positive; therefore, for electrolysis in an electrolytic cell, the redox reaction has a . Statement I is false.

Nonspontaneous reactions are reactions that are unfavorable. This means that energy is required to carry out the reaction. In an electrolytic cell, energy is provided in the form of voltage input. The voltage provided pushes the reaction in the unfavorable direction; therefore, electrolysis reactions require a voltage source. Statement II is true.

Since it requires energy, an electrolysis reaction is considered to be an endothermic process. Recall that endothermic processes are reactions that take in (or require) energy, whereas exothermic processes are reactions that release energy; therefore, electrolysis is an endothermic process. Statement III is false.

The question states that the reaction has a negative ; therefore, the reaction is nonspontaneous. Nonspontaneous reactions are carried out in electrolytic cells (as opposed to galvanic cells). A reaction usually proceeds in the spontaneous direction; therefore, to carry out nonspontaneous reactions you must put energy into the system. Without energy, the reaction shown will occur in the reverse direction.

In an electrolytic cell, energy is provided by an external voltage source. Without energy, the electrolytic cell will have a voltage of and the spontaneous (reverse) reaction will occur. For the nonspontaneous reaction to occur, you must attach a voltage source in such a way that the voltage applied is greater than and is applied in the opposite direction (nonspontaneous reaction direction). This will force the reaction in the reverse direction and the nonspontaneous reaction will occur; therefore, the external voltage source must provide a voltage greater than .