Biochemistry, Organic Chemistry, and Other Concepts - MCAT Chemical and Physical Foundations of Biological Systems

Cellulose is a polysaccharide (a sugar). Glucose is the monosaccharide used to generate the structure of cellulose via linkages. Cellulose is composed of several hundred glucose molecules bound in this chain. Due to the nature of the beta linkage, humans cannot digest cellulose.

We are told that the inhibitor binds noncovalently, so suicide inhibitors are not an option. Since the inhibitor only affects the catalytic rate of the enzyme, and not the Michaelis constant, we can say that the inhibitor is following a mechanism such as that of a noncompeitive inhibitor.

If there was more mass (in grams) of the element in container 1 than there was in container 2, we would expect container 1 to undergo a smaller temperature change compared to container 2. This is justified by the equation , where m is the mass.

Rewritten as , we can see that a larger mass would result in a smaller temperature change. Remember that q is held constant between the two containers.

If element 2 expelled some of its energy to the surroundings in the form of work (expanding the container), it could explain why it had a smaller temperature change. In addition, different phases of an element have different specific heat capacities. This can also explain the difference in temperature between the two element samples.

Convection describes heat transfer through a fluid medium, such as a gas or liquid. In this case, the burning tree transfers heat to the air, which transfers the heat to the other tree.

Conduction requires direct contact, which would occur if a burning tree fell into another tree. Radiation is the electromagnetic transfer of heat, such as the sun's heat that travels to Earth, and does not require matter to transfer. Transduction is not a mechanism for heat transfer.

Bond dissociation energy is the energy associated with a bond within a molecule. This means that bond dissociation energy is measured for intramolecular bonds. All covalent and ionic bonds are considered intramolecular bonds, and are generally quite permanent. Ionic bonds and polar covalent bonds can help develop dipoles in a molecule, which later facilitate intermolecular interactions.

Hydrogen bonds are intermolecular bonds, which do not have associated bond dissociation energies because these type of bonds are temporary, and are formed between different molecules.

There are six possible phase changes between the three phases of matter. Deposition describes the change from gas to solid, while sublimation describes the transition from solid to gas. Freezing (crystallization) is the transition from liquid to solid, while fusion (melting) is the transition from solid to liquid. Condensation is the transition from gas to liquid, while vaporization (boiling) is the transition from liquid to gas.

First, find the original area of the hole, in square meters:

We will also convert the temperatures to Kelvin.

The linear thermal expansion equation is:

Similarly, the thermal expansion of an area is given by the equation:

We are given the value of the constant, we know the original area, and we have the change in temperature. Using these values, we can solve for the change in area.

Find the final area of the hole by adding the change in area to the original area.

Low pressure ensures that the molecules are not confined to a more organized state such as liquid or solid, while high temperature means higher kinetic energy, which means that the molecules have more energy to move away from one another and into the gaseous state. Low temperature would mean molecules have less energy to move away from one another, and high pressure will force molecules to be in a more organized state.

Raining occurs when water vapors become liquid water in the sky. Deposition is the phase change from gas to solid, sublimation is the phase change form solid to gas, and evaporation is the phase change from liquid to gas.

Melting occurs because the skates apply pressure to the ice. Due to the negative slope of solid-liquid equilibrium line for water, increased pressure results in a change from solid to liquid. None of the other answer choices do not have to do with the equilibrium between solid and liquid.

Sweating reduces skin temperature because the sweat that is secreted to the skin evaporates, which is an endothermic process. Thus, heat is absorbed from the body and skin to drive the evaporation of the sweat on the skin.

Structure "X" corresponds to the slat bridge. Its main function is balancing the ionic charge that builds up as a voltaic cell functions; therefore, there needs to be an ability for the salt bridge to ionize and send appropriate ions to each half cell. KOH is the only ionizable salt among the answer choices.

The correct answer is , as we would need to balance the loss of positive silver ions in that half cell. Silver has the greater reduction potential, and is therefore gaining electrons to become more negative. As the negative charge develops, it will attract the positive potassium ions in the salt bridge.

This is an example of a concentration cell. If you have two half cells, each made of the same chemical species, and connect them with a wire, the cell will generate a voltage as it attempts to correct the disequilibrium induced by the concentration difference.

The function of a voltaic cell requires the generation and dissolution of ions. Acetic acid is the only answer choice with a net dipole moment, and would therefore be the only one to dissolve the ions produced. The other choices would be unable to dissolve the ions, and the cell would not function.

As the cell runs, only copper produces ions. Silver actually loses ions from solution. If this continues without balance by the salt bridge, the positive ions build up in the solution on the left side of the diagram, without any balanced negative ions, and repel the formation of new copper ions more and more strongly.

There must be pre-existing in the right-side half reaction for the cell to function at all. Without the pre-existing ions, the cell has no electron acceptor dissolved in solution, and no electron transfer can therefore take place. Electron transfer is the fundamental energy-producing process that takes place in a voltaic cell.

Potassium ions (K+) will be positively charged, which means they will travel towards the side of the cell that is more negative. Reduction takes place at the cathode, because electrons flow from the anode to the cathode. Since negative charge accumulates at the cathode, the cations will travel in that direction, while the anions will travel towards the anode.

Convection describes heat transfer through a fluid medium, such as a gas or liquid. In this case, the burning tree transfers heat to the air, which transfers the heat to the other tree.

Conduction requires direct contact, which would occur if a burning tree fell into another tree. Radiation is the electromagnetic transfer of heat, such as the sun's heat that travels to Earth, and does not require matter to transfer. Transduction is not a mechanism for heat transfer.

Bond dissociation energy is the energy associated with a bond within a molecule. This means that bond dissociation energy is measured for intramolecular bonds. All covalent and ionic bonds are considered intramolecular bonds, and are generally quite permanent. Ionic bonds and polar covalent bonds can help develop dipoles in a molecule, which later facilitate intermolecular interactions.

Hydrogen bonds are intermolecular bonds, which do not have associated bond dissociation energies because these type of bonds are temporary, and are formed between different molecules.