DSQ: Calculating ratio and proportion - GMAT Quantitative
Card 1 of 40
At Branchwood Middle School, there are 4 sixth graders for every 5 seventh graders and 6 seventh graders for every 5 eighth graders. How many sixth graders are there?
1. The ratio of sixth graders to eighth graders is 24:25
2. There are 75 eighth graders at the middle school.
At Branchwood Middle School, there are 4 sixth graders for every 5 seventh graders and 6 seventh graders for every 5 eighth graders. How many sixth graders are there?
1. The ratio of sixth graders to eighth graders is 24:25
2. There are 75 eighth graders at the middle school.
Tap to reveal answer
Statement 1: This information can already be determined from the original information.
Statement 2: The two ratios can be connected by the common element of seventh graders. Convert the two ratios so that the seventh grade value is the same in both. The ratio of sixth graders: seventh graders:eighth graders = 24:30:25.
Therefore, 
Statement 1: This information can already be determined from the original information.
Statement 2: The two ratios can be connected by the common element of seventh graders. Convert the two ratios so that the seventh grade value is the same in both. The ratio of sixth graders: seventh graders:eighth graders = 24:30:25.
Therefore,
← Didn't Know|Knew It →
Fred is looking at a map and is wondering how far it is from Washington City to Bush Corner. He sees that on the map, they are three and a half inches apart. From the map distance between the two, how far is it in actual miles?
Statement 1: The distance from Adamsville to Clinton Ridge on the map is four and a half inches.
Statement 2: In actuality, it is 85 miles from Adamsville to Clinton Ridge.
Fred is looking at a map and is wondering how far it is from Washington City to Bush Corner. He sees that on the map, they are three and a half inches apart. From the map distance between the two, how far is it in actual miles?
Statement 1: The distance from Adamsville to Clinton Ridge on the map is four and a half inches.
Statement 2: In actuality, it is 85 miles from Adamsville to Clinton Ridge.
Tap to reveal answer
Fred needs to know the ratio of actual miles to map inches to solve this problem; once he knows this, he can multiply this ratio by the map distance from Washington City to Bush Corner. Neither of the facts alone about the other two cities are helpful, but if he knows both, he can determine the ratio he needs to achieve his goal.
Fred needs to know the ratio of actual miles to map inches to solve this problem; once he knows this, he can multiply this ratio by the map distance from Washington City to Bush Corner. Neither of the facts alone about the other two cities are helpful, but if he knows both, he can determine the ratio he needs to achieve his goal.
← Didn't Know|Knew It →
Last year, a computer shop had an average of 75 computers in stock at the start of each day, and it sold an average of 300 computers each week.
This year, the shop is expecting to sell an average of 732 computers each week. The computer store wants to use last year's ratio of computers in stock to computers sold to decide how many computers to have in stock each day. What should this target number be?
Last year, a computer shop had an average of 75 computers in stock at the start of each day, and it sold an average of 300 computers each week.
This year, the shop is expecting to sell an average of 732 computers each week. The computer store wants to use last year's ratio of computers in stock to computers sold to decide how many computers to have in stock each day. What should this target number be?
Tap to reveal answer
We can set up a proportion to solve for the number of computers the store should keep in stock each day:
Cross-multiply:
Divide both sides by 300:
The store should aim to have 183 computers in stock at the start of each day.
We can set up a proportion to solve for the number of computers the store should keep in stock each day:
Cross-multiply:
Divide both sides by 300:
The store should aim to have 183 computers in stock at the start of each day.
← Didn't Know|Knew It →
Eleanor has a a scale model of the Voyager I probe. What is the radius of the dish in the model?
I) The length of the antennae on the model is 
the length of the actual antennae.
II) The radius of the dish on the actual probe is 
feet.
Eleanor has a a scale model of the Voyager I probe. What is the radius of the dish in the model?
I) The length of the antennae on the model is
II) The radius of the dish on the actual probe is
Tap to reveal answer
The secret to this problem is to set up a proportion.
We are given the ratio of one part of the model from Statement I, and asked to find the length of another part.
We need both I) and II) to set up the following proportion.
So both statements are needed.
The secret to this problem is to set up a proportion.
We are given the ratio of one part of the model from Statement I, and asked to find the length of another part.
We need both I) and II) to set up the following proportion.
So both statements are needed.
← Didn't Know|Knew It →
In a car dealership there are 
SUVs to every 
sedans, and 
sedans to every 
sports car. How many sedans are there?
- There are
SUVs.
- There are
sport cars.
In a car dealership there are
- There are
- There are
Tap to reveal answer
We can combine the given ratios into one ratio by using the least common mulitiple of 8 and 6, which is 24.
In order to arrive to 24, we need to multiply the first ratio by 3 and the second ratio by 4. We can then arrive to a single ratio of 
Using our ratio, we have an equation: 
Statement 1: 
then 
sedans
so Statement 1 is sufficient to answer the question
Statement 2: 
then 
sedans
so Statement 2 is also sufficient to answer the question
We can combine the given ratios into one ratio by using the least common mulitiple of 8 and 6, which is 24.
In order to arrive to 24, we need to multiply the first ratio by 3 and the second ratio by 4. We can then arrive to a single ratio of
Using our ratio, we have an equation:
Statement 1:
then
so Statement 1 is sufficient to answer the question
Statement 2:
then
so Statement 2 is also sufficient to answer the question
← Didn't Know|Knew It →
At Branchwood Middle School, there are 4 sixth graders for every 5 seventh graders and 6 seventh graders for every 5 eighth graders. How many sixth graders are there?
1. The ratio of sixth graders to eighth graders is 24:25
2. There are 75 eighth graders at the middle school.
At Branchwood Middle School, there are 4 sixth graders for every 5 seventh graders and 6 seventh graders for every 5 eighth graders. How many sixth graders are there?
1. The ratio of sixth graders to eighth graders is 24:25
2. There are 75 eighth graders at the middle school.
Tap to reveal answer
Statement 1: This information can already be determined from the original information.
Statement 2: The two ratios can be connected by the common element of seventh graders. Convert the two ratios so that the seventh grade value is the same in both. The ratio of sixth graders: seventh graders:eighth graders = 24:30:25.
Therefore,
Statement 1: This information can already be determined from the original information.
Statement 2: The two ratios can be connected by the common element of seventh graders. Convert the two ratios so that the seventh grade value is the same in both. The ratio of sixth graders: seventh graders:eighth graders = 24:30:25.
Therefore,
← Didn't Know|Knew It →
Fred is looking at a map and is wondering how far it is from Washington City to Bush Corner. He sees that on the map, they are three and a half inches apart. From the map distance between the two, how far is it in actual miles?
Statement 1: The distance from Adamsville to Clinton Ridge on the map is four and a half inches.
Statement 2: In actuality, it is 85 miles from Adamsville to Clinton Ridge.
Fred is looking at a map and is wondering how far it is from Washington City to Bush Corner. He sees that on the map, they are three and a half inches apart. From the map distance between the two, how far is it in actual miles?
Statement 1: The distance from Adamsville to Clinton Ridge on the map is four and a half inches.
Statement 2: In actuality, it is 85 miles from Adamsville to Clinton Ridge.
Tap to reveal answer
Fred needs to know the ratio of actual miles to map inches to solve this problem; once he knows this, he can multiply this ratio by the map distance from Washington City to Bush Corner. Neither of the facts alone about the other two cities are helpful, but if he knows both, he can determine the ratio he needs to achieve his goal.
Fred needs to know the ratio of actual miles to map inches to solve this problem; once he knows this, he can multiply this ratio by the map distance from Washington City to Bush Corner. Neither of the facts alone about the other two cities are helpful, but if he knows both, he can determine the ratio he needs to achieve his goal.
← Didn't Know|Knew It →
Last year, a computer shop had an average of 75 computers in stock at the start of each day, and it sold an average of 300 computers each week.
This year, the shop is expecting to sell an average of 732 computers each week. The computer store wants to use last year's ratio of computers in stock to computers sold to decide how many computers to have in stock each day. What should this target number be?
Last year, a computer shop had an average of 75 computers in stock at the start of each day, and it sold an average of 300 computers each week.
This year, the shop is expecting to sell an average of 732 computers each week. The computer store wants to use last year's ratio of computers in stock to computers sold to decide how many computers to have in stock each day. What should this target number be?
Tap to reveal answer
We can set up a proportion to solve for the number of computers the store should keep in stock each day:
Cross-multiply:
Divide both sides by 300:
The store should aim to have 183 computers in stock at the start of each day.
We can set up a proportion to solve for the number of computers the store should keep in stock each day:
Cross-multiply:
Divide both sides by 300:
The store should aim to have 183 computers in stock at the start of each day.
← Didn't Know|Knew It →
Eleanor has a a scale model of the Voyager I probe. What is the radius of the dish in the model?
I) The length of the antennae on the model is the length of the actual antennae.
II) The radius of the dish on the actual probe is feet.
Eleanor has a a scale model of the Voyager I probe. What is the radius of the dish in the model?
I) The length of the antennae on the model is
II) The radius of the dish on the actual probe is
Tap to reveal answer
The secret to this problem is to set up a proportion.
We are given the ratio of one part of the model from Statement I, and asked to find the length of another part.
We need both I) and II) to set up the following proportion.
So both statements are needed.
The secret to this problem is to set up a proportion.
We are given the ratio of one part of the model from Statement I, and asked to find the length of another part.
We need both I) and II) to set up the following proportion.
So both statements are needed.
← Didn't Know|Knew It →
In a car dealership there are SUVs to every sedans, and sedans to every sports car. How many sedans are there?
- There are SUVs.
- There are sport cars.
In a car dealership there are
- There are
- There are
Tap to reveal answer
We can combine the given ratios into one ratio by using the least common mulitiple of 8 and 6, which is 24.
In order to arrive to 24, we need to multiply the first ratio by 3 and the second ratio by 4. We can then arrive to a single ratio of
Using our ratio, we have an equation:
Statement 1:
then sedans
so Statement 1 is sufficient to answer the question
Statement 2:
then sedans
so Statement 2 is also sufficient to answer the question
We can combine the given ratios into one ratio by using the least common mulitiple of 8 and 6, which is 24.
In order to arrive to 24, we need to multiply the first ratio by 3 and the second ratio by 4. We can then arrive to a single ratio of
Using our ratio, we have an equation:
Statement 1:
then
so Statement 1 is sufficient to answer the question
Statement 2:
then
so Statement 2 is also sufficient to answer the question
← Didn't Know|Knew It →
At Branchwood Middle School, there are 4 sixth graders for every 5 seventh graders and 6 seventh graders for every 5 eighth graders. How many sixth graders are there?
1. The ratio of sixth graders to eighth graders is 24:25
2. There are 75 eighth graders at the middle school.
At Branchwood Middle School, there are 4 sixth graders for every 5 seventh graders and 6 seventh graders for every 5 eighth graders. How many sixth graders are there?
1. The ratio of sixth graders to eighth graders is 24:25
2. There are 75 eighth graders at the middle school.
Tap to reveal answer
Statement 1: This information can already be determined from the original information.
Statement 2: The two ratios can be connected by the common element of seventh graders. Convert the two ratios so that the seventh grade value is the same in both. The ratio of sixth graders: seventh graders:eighth graders = 24:30:25.
Therefore,
Statement 1: This information can already be determined from the original information.
Statement 2: The two ratios can be connected by the common element of seventh graders. Convert the two ratios so that the seventh grade value is the same in both. The ratio of sixth graders: seventh graders:eighth graders = 24:30:25.
Therefore,
← Didn't Know|Knew It →
Fred is looking at a map and is wondering how far it is from Washington City to Bush Corner. He sees that on the map, they are three and a half inches apart. From the map distance between the two, how far is it in actual miles?
Statement 1: The distance from Adamsville to Clinton Ridge on the map is four and a half inches.
Statement 2: In actuality, it is 85 miles from Adamsville to Clinton Ridge.
Fred is looking at a map and is wondering how far it is from Washington City to Bush Corner. He sees that on the map, they are three and a half inches apart. From the map distance between the two, how far is it in actual miles?
Statement 1: The distance from Adamsville to Clinton Ridge on the map is four and a half inches.
Statement 2: In actuality, it is 85 miles from Adamsville to Clinton Ridge.
Tap to reveal answer
Fred needs to know the ratio of actual miles to map inches to solve this problem; once he knows this, he can multiply this ratio by the map distance from Washington City to Bush Corner. Neither of the facts alone about the other two cities are helpful, but if he knows both, he can determine the ratio he needs to achieve his goal.
Fred needs to know the ratio of actual miles to map inches to solve this problem; once he knows this, he can multiply this ratio by the map distance from Washington City to Bush Corner. Neither of the facts alone about the other two cities are helpful, but if he knows both, he can determine the ratio he needs to achieve his goal.
← Didn't Know|Knew It →
Last year, a computer shop had an average of 75 computers in stock at the start of each day, and it sold an average of 300 computers each week.
This year, the shop is expecting to sell an average of 732 computers each week. The computer store wants to use last year's ratio of computers in stock to computers sold to decide how many computers to have in stock each day. What should this target number be?
Last year, a computer shop had an average of 75 computers in stock at the start of each day, and it sold an average of 300 computers each week.
This year, the shop is expecting to sell an average of 732 computers each week. The computer store wants to use last year's ratio of computers in stock to computers sold to decide how many computers to have in stock each day. What should this target number be?
Tap to reveal answer
We can set up a proportion to solve for the number of computers the store should keep in stock each day:
Cross-multiply:
Divide both sides by 300:
The store should aim to have 183 computers in stock at the start of each day.
We can set up a proportion to solve for the number of computers the store should keep in stock each day:
Cross-multiply:
Divide both sides by 300:
The store should aim to have 183 computers in stock at the start of each day.
← Didn't Know|Knew It →
Eleanor has a a scale model of the Voyager I probe. What is the radius of the dish in the model?
I) The length of the antennae on the model is the length of the actual antennae.
II) The radius of the dish on the actual probe is feet.
Eleanor has a a scale model of the Voyager I probe. What is the radius of the dish in the model?
I) The length of the antennae on the model is
II) The radius of the dish on the actual probe is
Tap to reveal answer
The secret to this problem is to set up a proportion.
We are given the ratio of one part of the model from Statement I, and asked to find the length of another part.
We need both I) and II) to set up the following proportion.
So both statements are needed.
The secret to this problem is to set up a proportion.
We are given the ratio of one part of the model from Statement I, and asked to find the length of another part.
We need both I) and II) to set up the following proportion.
So both statements are needed.
← Didn't Know|Knew It →
In a car dealership there are SUVs to every sedans, and sedans to every sports car. How many sedans are there?
- There are SUVs.
- There are sport cars.
In a car dealership there are
- There are
- There are
Tap to reveal answer
We can combine the given ratios into one ratio by using the least common mulitiple of 8 and 6, which is 24.
In order to arrive to 24, we need to multiply the first ratio by 3 and the second ratio by 4. We can then arrive to a single ratio of
Using our ratio, we have an equation:
Statement 1:
then sedans
so Statement 1 is sufficient to answer the question
Statement 2:
then sedans
so Statement 2 is also sufficient to answer the question
We can combine the given ratios into one ratio by using the least common mulitiple of 8 and 6, which is 24.
In order to arrive to 24, we need to multiply the first ratio by 3 and the second ratio by 4. We can then arrive to a single ratio of
Using our ratio, we have an equation:
Statement 1:
then
so Statement 1 is sufficient to answer the question
Statement 2:
then
so Statement 2 is also sufficient to answer the question
← Didn't Know|Knew It →
At Branchwood Middle School, there are 4 sixth graders for every 5 seventh graders and 6 seventh graders for every 5 eighth graders. How many sixth graders are there?
1. The ratio of sixth graders to eighth graders is 24:25
2. There are 75 eighth graders at the middle school.
At Branchwood Middle School, there are 4 sixth graders for every 5 seventh graders and 6 seventh graders for every 5 eighth graders. How many sixth graders are there?
1. The ratio of sixth graders to eighth graders is 24:25
2. There are 75 eighth graders at the middle school.
Tap to reveal answer
Statement 1: This information can already be determined from the original information.
Statement 2: The two ratios can be connected by the common element of seventh graders. Convert the two ratios so that the seventh grade value is the same in both. The ratio of sixth graders: seventh graders:eighth graders = 24:30:25.
Therefore,
Statement 1: This information can already be determined from the original information.
Statement 2: The two ratios can be connected by the common element of seventh graders. Convert the two ratios so that the seventh grade value is the same in both. The ratio of sixth graders: seventh graders:eighth graders = 24:30:25.
Therefore,
← Didn't Know|Knew It →
Fred is looking at a map and is wondering how far it is from Washington City to Bush Corner. He sees that on the map, they are three and a half inches apart. From the map distance between the two, how far is it in actual miles?
Statement 1: The distance from Adamsville to Clinton Ridge on the map is four and a half inches.
Statement 2: In actuality, it is 85 miles from Adamsville to Clinton Ridge.
Fred is looking at a map and is wondering how far it is from Washington City to Bush Corner. He sees that on the map, they are three and a half inches apart. From the map distance between the two, how far is it in actual miles?
Statement 1: The distance from Adamsville to Clinton Ridge on the map is four and a half inches.
Statement 2: In actuality, it is 85 miles from Adamsville to Clinton Ridge.
Tap to reveal answer
Fred needs to know the ratio of actual miles to map inches to solve this problem; once he knows this, he can multiply this ratio by the map distance from Washington City to Bush Corner. Neither of the facts alone about the other two cities are helpful, but if he knows both, he can determine the ratio he needs to achieve his goal.
Fred needs to know the ratio of actual miles to map inches to solve this problem; once he knows this, he can multiply this ratio by the map distance from Washington City to Bush Corner. Neither of the facts alone about the other two cities are helpful, but if he knows both, he can determine the ratio he needs to achieve his goal.
← Didn't Know|Knew It →
Last year, a computer shop had an average of 75 computers in stock at the start of each day, and it sold an average of 300 computers each week.
This year, the shop is expecting to sell an average of 732 computers each week. The computer store wants to use last year's ratio of computers in stock to computers sold to decide how many computers to have in stock each day. What should this target number be?
Last year, a computer shop had an average of 75 computers in stock at the start of each day, and it sold an average of 300 computers each week.
This year, the shop is expecting to sell an average of 732 computers each week. The computer store wants to use last year's ratio of computers in stock to computers sold to decide how many computers to have in stock each day. What should this target number be?
Tap to reveal answer
We can set up a proportion to solve for the number of computers the store should keep in stock each day:
Cross-multiply:
Divide both sides by 300:
The store should aim to have 183 computers in stock at the start of each day.
We can set up a proportion to solve for the number of computers the store should keep in stock each day:
Cross-multiply:
Divide both sides by 300:
The store should aim to have 183 computers in stock at the start of each day.
← Didn't Know|Knew It →
Eleanor has a a scale model of the Voyager I probe. What is the radius of the dish in the model?
I) The length of the antennae on the model is the length of the actual antennae.
II) The radius of the dish on the actual probe is feet.
Eleanor has a a scale model of the Voyager I probe. What is the radius of the dish in the model?
I) The length of the antennae on the model is
II) The radius of the dish on the actual probe is
Tap to reveal answer
The secret to this problem is to set up a proportion.
We are given the ratio of one part of the model from Statement I, and asked to find the length of another part.
We need both I) and II) to set up the following proportion.
So both statements are needed.
The secret to this problem is to set up a proportion.
We are given the ratio of one part of the model from Statement I, and asked to find the length of another part.
We need both I) and II) to set up the following proportion.
So both statements are needed.
← Didn't Know|Knew It →
In a car dealership there are SUVs to every sedans, and sedans to every sports car. How many sedans are there?
- There are SUVs.
- There are sport cars.
In a car dealership there are
- There are
- There are
Tap to reveal answer
We can combine the given ratios into one ratio by using the least common mulitiple of 8 and 6, which is 24.
In order to arrive to 24, we need to multiply the first ratio by 3 and the second ratio by 4. We can then arrive to a single ratio of
Using our ratio, we have an equation:
Statement 1:
then sedans
so Statement 1 is sufficient to answer the question
Statement 2:
then sedans
so Statement 2 is also sufficient to answer the question
We can combine the given ratios into one ratio by using the least common mulitiple of 8 and 6, which is 24.
In order to arrive to 24, we need to multiply the first ratio by 3 and the second ratio by 4. We can then arrive to a single ratio of
Using our ratio, we have an equation:
Statement 1:
then
so Statement 1 is sufficient to answer the question
Statement 2:
then
so Statement 2 is also sufficient to answer the question
← Didn't Know|Knew It →