Thermodynamics Quiz: P V T Relationships

20 questions · exam conditions

0:00

P V T RelationshipsQuestion 1 of 20

A substance undergoes a process from state 1 to state 2. At state 1, the pressure is 300 kPa and specific volume is 0.8 m³/kg. At state 2, the pressure is 600 kPa and specific volume is 0.4 m³/kg. If the relationship between pressure and specific volume follows $P v^n = \text{constant}$ , what is the value of the polytropic index $n$ ?

0.5

1.0

1.5

2.0

2.5

← Back to quizzes

Thermodynamics Quiz

Thermodynamics Quiz: P V T Relationships

Practice P V T Relationships in Thermodynamics with focused quiz questions that help you check what you know, review explanations, and build confidence with test-style prompts.

What this quiz covers

This quiz focuses on P V T Relationships, giving you a quick way to practice the rules, question types, and explanations that matter most for Thermodynamics.

How to use this quiz

Try each quiz question before looking at the correct answer. Use the explanations to review missed ideas, then come back to similar questions until the pattern feels familiar.

All questions

Question 1

0.5
1.0 (correct answer)
1.5
2.0
2.5

Explanation: When you encounter a polytropic process question, you're dealing with processes that follow the relationship

Pv^n = \text{constant}

, where the polytropic index

n

determines the specific type of process. To find

n

, you need to apply this relationship to both states. Since

P_1v_1^n = P_2v_2^n

, you can solve for

n

by rearranging:

\frac{P_1}{P_2} = \left(\frac{v_2}{v_1}\right)^n

Taking the natural logarithm of both sides:

n = \frac{\ln(P_1/P_2)}{\ln(v_2/v_1)}

Substituting the given values:

n = \frac{\ln(300/600)}{\ln(0.4/0.8)} = \frac{\ln(0.5)}{\ln(0.5)} = \frac{-0.693}{-0.693} = 1

Therefore,

n = 1.0

, which corresponds to answer (B). Let's examine why the other options are incorrect: (A) 0.5 would represent a process where pressure increases more gradually with decreasing volume than what actually occurs here. (C) 1.5 would indicate a process steeper than isothermal, where pressure rises more rapidly than the

n=1

case. (D) 2.0 represents an even steeper relationship, characteristic of an adiabatic process for a monatomic gas, which doesn't match these data points. Study tip: Remember that

n=1

specifically indicates an isothermal process (constant temperature). When solving polytropic problems, always use the logarithmic approach shown above—it's the most reliable method and helps you avoid arithmetic errors with exponential relationships.

Question 2

A rigid tank contains a two-phase mixture of water at 150°C. The tank volume is 0.5 m³ and contains 10 kg of water total. If the specific volume of saturated liquid at 150°C is 0.001091 m³/kg and the specific volume of saturated vapor is 0.39248 m³/kg, what is the dryness fraction (quality) of the mixture?

0.127 (correct answer)
0.873
0.145
0.855
0.182

Explanation: When you encounter two-phase mixture problems in thermodynamics, you're dealing with a system where liquid and vapor coexist in equilibrium. The key is understanding that the total volume equals the sum of liquid and vapor volumes, and using quality (dryness fraction) to relate the mass and volume distributions. For this mixture, you need to find the quality

x

, which represents the fraction of total mass that exists as vapor. Start with the volume relationship:

V_{total} = V_f + V_g = m_f v_f + m_g v_g

, where subscripts

f

and

g

denote liquid and vapor phases respectively. Since

m_f + m_g = 10

kg and

m_g = x \cdot m_{total} = 10x

, then

m_f = 10(1-x)

. Substituting into the volume equation:

0.5 = 10(1-x)(0.001091) + 10x(0.39248)

0.5 = 0.01091 - 0.01091x + 3.9248x

0.5 = 0.01091 + 3.9139x

x = \frac{0.48909}{3.9139} = 0.127

The correct answer is A) 0.127. Answer B (0.873) represents

1-x

, the liquid fraction—a common mix-up. Answer C (0.145) and D (0.855) likely result from calculation errors, possibly incorrect handling of the volume equation or unit conversions. Remember: quality problems always involve setting up the volume (or internal energy) balance equation. Double-check that you're solving for vapor fraction, not liquid fraction, and verify your arithmetic carefully since these calculations involve several decimal places.

Question 3

For a substance following the ideal gas equation of state, which combination of processes will result in the substance returning to its initial pressure and temperature, but with a different internal energy?

An isothermal expansion followed by an adiabatic compression back to the original volume
An isobaric expansion followed by an isochoric cooling back to the original temperature
An adiabatic expansion followed by an isobaric compression back to the original volume
An isochoric heating followed by an isothermal expansion back to the original pressure
It is impossible for an ideal gas to return to the same pressure and temperature with different internal energy (correct answer)

Explanation: When analyzing cyclic processes in thermodynamics, you need to consider how state functions like internal energy behave differently from path functions. For an ideal gas, internal energy depends only on temperature, so returning to the same temperature means returning to the same internal energy. However, there's a critical issue with this question: it's impossible for any process to return an ideal gas to its initial pressure and temperature while having different internal energy. Since internal energy for an ideal gas depends solely on temperature (

U = nC_VT

), returning to the original temperature automatically means returning to the original internal energy. Let's examine why each option fails this fundamental requirement: Option A: The isothermal expansion maintains constant temperature, then adiabatic compression changes both pressure and temperature. This won't return to the original state. Option B: Isobaric expansion increases temperature, then isochoric cooling returns to original temperature. This actually returns to the original state completely, including internal energy. Option C: Adiabatic expansion decreases both pressure and temperature, then isobaric compression won't restore the original temperature. Option D: Isochoric heating increases both pressure and temperature, then isothermal expansion decreases pressure. This won't return to the exact original state either. The question appears to contain a fundamental thermodynamic impossibility. For ideal gases, any process returning to the initial temperature and pressure must also return to the initial internal energy. Study tip: Remember that for ideal gases, internal energy is a function of temperature only. If temperature returns to its initial value, internal energy must also return to its initial value - no exceptions.

Question 4

The reduced temperature $T_r$ and reduced pressure $P_r$ are defined as $T_r = T/T_c$ and $P_r = P/P_c$ , where $T_c$ and $P_c$ are the critical temperature and pressure. According to the principle of corresponding states, two different substances at the same reduced temperature and reduced pressure should have approximately the same:

Absolute temperature and pressure values
Molar volume and density values
Compressibility factor and reduced volume (correct answer)
Critical temperature and critical pressure
Molecular weight and specific heat capacity

Explanation: The principle of corresponding states is a powerful concept in thermodynamics that reveals how different substances behave similarly when compared at equivalent reduced conditions. When you encounter questions about corresponding states, focus on which properties become universal when expressed in reduced form. According to this principle, substances at the same reduced temperature (

T_r = T/T_c

) and reduced pressure (

P_r = P/P_c

) will have approximately the same compressibility factor

Z = PV/nRT

and the same reduced volume

V_r = V/V_c

. This happens because the reduced properties effectively "normalize" the behavior by scaling each substance relative to its own critical point. The compressibility factor measures how much a real gas deviates from ideal behavior, and this deviation follows similar patterns across different substances when compared at equivalent reduced states. Option A is incorrect because substances with vastly different critical properties will have completely different absolute temperatures and pressures even at the same reduced conditions. Option B is wrong because molar volumes and densities depend on molecular size and mass, which vary significantly between substances regardless of reduced state. Option D misunderstands the concept entirely—critical properties are fixed, characteristic values for each substance and don't change based on operating conditions. Remember that corresponding states questions test whether you understand that reduced properties create universal behavior patterns. When you see reduced temperature and pressure mentioned together, think about which properties become substance-independent, particularly the compressibility factor and other reduced intensive properties.

Question 5

A piston-cylinder device contains steam initially at 2 MPa and 300°C. The steam expands polytropically according to $Pv^{1.2} = \text{constant}$ until the pressure drops to 0.5 MPa. At the initial state, the steam is superheated with $v_1 = 0.12547 \text{ m}^3/\text{kg}$ . At 0.5 MPa, the saturation temperature is 151.9°C with $v_g = 0.3749 \text{ m}^3/\text{kg}$ . What is the most likely final state of the steam?

Superheated vapor at approximately 180°C (correct answer)
Wet mixture with quality less than 1.0
Saturated vapor at 151.9°C
Compressed liquid below saturation temperature
Superheated vapor at approximately 151.9°C

Explanation: When analyzing polytropic processes involving phase changes, you need to determine the final specific volume first, then compare it to saturation properties to identify the phase state. Using the polytropic relation

Pv^{1.2} = \text{constant}

, you can find the final specific volume. From the initial state:

P_1v_1^{1.2} = P_2v_2^{1.2}

, so

(2000)(0.12547)^{1.2} = (500)v_2^{1.2}

. Solving this gives

v_2 = 0.4186 \text{ m}^3/\text{kg}

. Now comes the key comparison: at 0.5 MPa, the saturated vapor specific volume is

v_g = 0.3749 \text{ m}^3/\text{kg}

. Since

v_2 = 0.4186 > v_g = 0.3749

, the steam must be in the superheated region. The temperature will be above the saturation temperature of 151.9°C, likely around 180°C based on typical superheated steam properties. Looking at the wrong answers: B is incorrect because when specific volume exceeds

v_g

, the steam cannot be a wet mixture—it's fully vaporized and superheated. C is wrong because saturated vapor would have

v = v_g = 0.3749

, but we calculated

v_2 = 0.4186

. D makes no physical sense since expansion from superheated vapor cannot produce compressed liquid. Study tip: Always calculate the final specific volume in polytropic processes first, then compare it to saturation properties (

v_f

and

v_g

) at the final pressure to determine the phase. If

v > v_g

, you're in the superheated region; if

v_f < v < v_g

, you have a wet mixture.

Question 6

Two identical rigid tanks are connected by a valve. Initially, Tank A contains saturated liquid water at 100°C and Tank B contains saturated vapor water at 100°C. The valve is opened and the contents mix until thermal equilibrium is reached. If the mass of water in Tank A equals the mass of water in Tank B, what can be concluded about the final state?

The final state will be a wet mixture with quality exactly 0.5 at 100°C
The final state will be saturated vapor at 100°C since vapor expands to fill available volume
The final state will be a wet mixture with quality greater than 0.5 at a temperature below 100°C
The final state will be saturated liquid at 100°C since liquid is denser than vapor
The final state will be a wet mixture with quality exactly 0.5 at a temperature below 100°C (correct answer)

Explanation: When analyzing mixing processes in thermodynamics, you need to apply conservation of mass and energy while recognizing that mixing is typically an irreversible process that increases entropy. Since the tanks are identical and contain equal masses, you have 50% saturated liquid and 50% saturated vapor by mass initially. If this were a reversible process at constant temperature, the final state would indeed be a wet mixture with quality 0.5 at 100°C. However, the spontaneous mixing of liquid and vapor phases is an irreversible process that increases the system's entropy. The correct answer is E because none of the given options properly account for this irreversibility. When the valve opens, the high-energy vapor molecules will transfer energy to the lower-energy liquid molecules through turbulent mixing, but this process generates entropy. The final equilibrium state will have the same total internal energy as initially, but at a lower temperature than 100°C with a quality slightly different from 0.5. Option A incorrectly assumes a reversible process at constant temperature. Option B misunderstands phase behavior - vapor doesn't automatically remain vapor when mixed with liquid. Option C correctly identifies that temperature drops and quality changes, but assumes quality increases rather than considering the complex energy redistribution. Option D incorrectly suggests the final state depends on density rather than energy balance. Remember: spontaneous mixing processes in thermodynamics are irreversible and increase entropy. Always consider whether energy redistribution during mixing affects the final temperature and phase composition.

Question 7

Consider the generalized compressibility chart where the compressibility factor Z is plotted against reduced pressure $P_r$ for various reduced temperatures $T_r$ . For a gas at $T_r = 1.5$ and $P_r = 2.0$ , the chart shows $Z = 0.85$ . If this same gas undergoes an isothermal process to $P_r = 4.0$ , and the new compressibility factor becomes $Z = 1.20$ , what does this change indicate about the gas behavior?

Intermolecular attractive forces become more significant as pressure increases
Molecular size effects become more dominant than attractive forces as pressure increases (correct answer)
The gas transitions from real gas behavior to ideal gas behavior during compression
The gas undergoes a phase transition from vapor to liquid during the isothermal process
The compressibility factor change indicates decreasing molecular interactions with pressure

Explanation: When analyzing compressibility factor changes on generalized charts, focus on what the Z value tells you about competing molecular effects in real gases. The compressibility factor Z compares real gas behavior to ideal gas behavior, where Z = 1 represents perfect ideal behavior. At low to moderate pressures, Z < 1 indicates that intermolecular attractive forces (van der Waals forces) dominate, causing the gas to be more compressible than an ideal gas. As pressure increases significantly, molecular size effects become more important because molecules are forced closer together, making the gas less compressible than ideal (Z > 1). In this problem, Z increases from 0.85 to 1.20 during isothermal compression from

P_r = 2.0

P_r = 4.0

. This dramatic shift from Z < 1 to Z > 1 demonstrates that molecular size effects have overtaken attractive forces as the dominant deviation from ideality. Answer B correctly identifies this transition. Answer A is backwards—if attractive forces were becoming more significant, Z would decrease further below 1, not increase above it. Answer C misinterprets the change; moving further from Z = 1 represents departure from ideal behavior, not approach to it. Answer D is incorrect because phase transitions show up as discontinuities or sharp changes in compressibility charts, not the smooth transition described here. Remember: Z < 1 means attractive forces dominate; Z > 1 means molecular size effects dominate. Watch for this crossover pattern when analyzing high-pressure gas behavior on compressibility charts.

Question 8

The virial equation of state can be written as $Z = 1 + \frac{B}{v} + \frac{C}{v^2} + ...$ where B and C are the second and third virial coefficients. For most gases at moderate temperatures, the second virial coefficient B is negative while the third virial coefficient C is positive. If only the first two terms are significant, under what conditions will this gas behave most nearly like an ideal gas?

At high pressure and low temperature where molecular interactions are maximized
At the specific volume where $v = -B$ , causing the correction term to equal -1
At very low pressure where the specific volume becomes very large (correct answer)
At the critical point where all virial coefficients become zero
At moderate pressures where the second and third virial coefficient effects exactly cancel

Explanation: The virial equation of state describes how real gases deviate from ideal gas behavior, with the compressibility factor Z showing these deviations. For an ideal gas, Z = 1, so any departure from unity indicates non-ideal behavior. When you examine the truncated virial equation

Z = 1 + \frac{B}{v}

, the key insight is that the gas approaches ideal behavior when Z approaches 1. This happens when the correction term

\frac{B}{v}

approaches zero. Since B is given as negative (and constant at a given temperature), the only way to minimize this term is to maximize the specific volume v. At very low pressures, gases occupy very large specific volumes, making

\frac{B}{v}

negligibly small regardless of B's sign. This drives Z toward 1, producing ideal gas behavior, which makes answer C correct. Answer A is wrong because high pressure creates small volumes, making the

\frac{B}{v}

term large and significant. Low temperatures also increase molecular interactions, worsening ideal gas approximations. Answer B represents a mathematical misunderstanding. At

v = -B

, the correction term equals -1, giving Z = 0, which is physically meaningless for a real gas and far from ideal behavior. Answer D incorrectly describes critical point behavior. Virial coefficients don't become zero at the critical point; instead, they take on specific finite values related to critical properties. Remember this pattern: real gases approach ideal behavior when intermolecular forces become negligible compared to kinetic energy. This always occurs at low pressure (high volume) and high temperature conditions.

Question 9

Consider a pure substance undergoing a cycle on a P-v diagram consisting of: (1→2) isothermal compression in the two-phase region, (2→3) constant volume heating to superheated vapor, (3→4) isobaric expansion, and (4→1) constant volume cooling back to the initial state. Which statement correctly describes the relative magnitudes of work done during each process?

$|W_{1-2}| > |W_{3-4}| > |W_{2-3}| = |W_{4-1}| = 0$
$|W_{3-4}| > |W_{1-2}| > |W_{2-3}| = |W_{4-1}| = 0$ (correct answer)
$|W_{1-2}| = |W_{3-4}| > |W_{2-3}| = |W_{4-1}| = 0$
$|W_{2-3}| > |W_{4-1}| > |W_{3-4}| > |W_{1-2}|$
All work terms are equal in magnitude since the cycle returns to the initial state

Explanation: When analyzing work in thermodynamic cycles, remember that work equals the area under the curve on a P-v diagram, and work is zero for any constant volume process since

W = \int P \, dv

. Let's examine each process systematically. For processes 2→3 and 4→1, both occur at constant volume, so

W_{2-3} = W_{4-1} = 0

since there's no volume change. For the isothermal compression 1→2 in the two-phase region, pressure remains constant (saturation pressure at that temperature), so this is actually an isobaric process with negative work since volume decreases. For the isobaric expansion 3→4, work is positive as volume increases at constant pressure. Since process 3→4 occurs at higher pressure (superheated region) and likely involves a larger volume change than the phase change compression,

|W_{3-4}| > |W_{1-2}|

. Option A incorrectly assumes the isothermal compression produces more work than the isobaric expansion, missing that the expansion occurs at higher pressure with greater volume change. Option C suggests the work magnitudes are equal for processes 1→2 and 3→4, but the different pressures and volume changes make this unlikely. Option D incorrectly assigns non-zero work to the constant volume processes, violating the fundamental definition of thermodynamic work. Therefore, option B correctly identifies that

|W_{3-4}| > |W_{1-2}| > |W_{2-3}| = |W_{4-1}| = 0

. Study tip: Always identify constant volume processes first (zero work), then compare remaining processes by considering both pressure levels and volume changes on the P-v diagram.

Question 10

The compressibility factor Z is defined as $Z = \frac{Pv}{RT}$ for real gases. For a van der Waals gas at moderate pressures and temperatures, if the intermolecular attractive forces dominate over molecular size effects, how does Z compare to the ideal gas value, and what does this indicate about the gas behavior?

Z > 1, indicating the gas is more compressible than an ideal gas due to molecular attractions reducing effective pressure
Z < 1, indicating the gas is more compressible than an ideal gas due to molecular attractions reducing effective pressure (correct answer)
Z > 1, indicating the gas is less compressible than an ideal gas due to molecular size effects increasing effective volume
Z < 1, indicating the gas is less compressible than an ideal gas due to molecular size effects increasing effective volume
Z = 1, indicating the gas behaves ideally when attractive forces exactly balance molecular size effects

Explanation: When analyzing real gas behavior, the compressibility factor Z tells you how much a gas deviates from ideal behavior. For an ideal gas, Z always equals 1, so any deviation indicates real gas effects are significant. The van der Waals equation accounts for two main real gas effects: intermolecular attractions (which reduce the effective pressure the gas exerts) and molecular volume (which reduces available space). When attractive forces dominate, molecules pull on each other, reducing the pressure they exert on container walls compared to an ideal gas at the same conditions. Since

Z = \frac{Pv}{RT}

, when the actual pressure is lower than expected for an ideal gas, Z becomes less than 1. This makes the gas more compressible because the attractive forces allow molecules to be drawn closer together more easily than in an ideal gas. Option A incorrectly states Z > 1 when attractions dominate. Option C gives Z > 1, which would occur when molecular size effects dominate (creating excluded volume), not attractive forces. Option D correctly identifies that molecular size effects cause Z > 1 and reduced compressibility, but this contradicts the given condition that attractive forces dominate. Option B correctly identifies that Z < 1 when attractive forces dominate, and correctly explains this makes the gas more compressible due to reduced effective pressure. Study tip: Remember the mnemonic "Attractions pull Apart" - when intermolecular attractions dominate, they pull molecules together, reducing pressure and making Z < 1. When size effects dominate, molecules resist compression, making Z > 1.

Question 11

A substance exists in a two-phase liquid-vapor equilibrium at 200°C in a piston-cylinder device. If heat is added at constant pressure until the substance becomes saturated vapor, and then the substance is compressed isothermally until it returns to the original specific volume, what can be concluded about the final state compared to the initial state?

The final state has the same temperature and pressure as the initial state, but is in the compressed liquid region
The final state has higher temperature and pressure than the initial state, and is in the two-phase region
The final state has the same temperature but higher pressure than the initial state, and is in the compressed liquid region (correct answer)
The final state has lower temperature but the same pressure as the initial state, and is in the two-phase region
The final state has the same temperature and pressure as the initial state, and is in the two-phase region

Explanation: This problem tests your understanding of phase diagrams and thermodynamic processes, particularly how temperature, pressure, and specific volume relate during phase changes and compression. Let's trace through the process step by step. You start with a two-phase liquid-vapor mixture at 200°C. When heat is added at constant pressure until you reach saturated vapor, the temperature remains at 200°C (since you're still at the saturation line), but the specific volume increases significantly as liquid converts to vapor. Next comes the isothermal compression back to the original specific volume. Since this occurs at constant temperature (200°C), you're moving horizontally on a T-v diagram. To compress from the large specific volume of saturated vapor back to the much smaller original specific volume, you must increase the pressure substantially. At 200°C with this higher pressure and smaller specific volume, the substance now exists as compressed liquid. Looking at the wrong answers: Choice A incorrectly states the final pressure equals the initial pressure, but compression at constant temperature requires pressure increase. Choice B suggests higher temperature, but isothermal compression keeps temperature constant at 200°C. Choice D claims lower temperature and same pressure, missing that isothermal means constant temperature and compression requires higher pressure. The final state has the same temperature (200°C from the isothermal process) but higher pressure (from compression), placing it in the compressed liquid region. Study tip: When analyzing thermodynamic cycles, always track each property (T, P, v) through every process step, and remember that compressed liquid occurs at high pressure above the saturation line.

Question 12

A rigid container is divided into two sections by a removable partition. Section A contains 0.5 kg of steam at 400°C and 300 kPa. Section B contains 1.5 kg of steam at 200°C and 150 kPa. The partition is removed and the contents mix adiabatically until equilibrium is reached. Based on the initial conditions, what can be determined about the final equilibrium state without performing detailed calculations?

The final pressure will be exactly 200 kPa since it's the average of initial pressures weighted by mass
The final temperature will be between 200°C and 400°C, and the final pressure will be between 150 kPa and 300 kPa (correct answer)
The final state will definitely be superheated steam since both initial states are superheated
The final pressure will be less than 150 kPa due to expansion into the larger combined volume
The final temperature will be exactly 250°C since equal amounts of thermal energy are exchanged between the sections

Explanation: When you encounter steam mixing problems, you're dealing with conservation of mass and energy in a closed system. The key insight is understanding what physical constraints govern the final equilibrium state. For adiabatic mixing of two steam samples, energy conservation requires that the final state properties lie between the initial values, weighted by mass. Since Section B has three times the mass of Section A, the final temperature will be closer to 200°C than 400°C, but definitely between these bounds. Similarly, when two gas volumes combine in a rigid container, the final pressure depends on both temperature mixing and volume expansion effects, but will fall within the range of initial pressures. Option A incorrectly assumes pressure mixing follows a simple mass-weighted average. Pressure equilibration in gas mixing involves complex interactions between temperature changes and volume effects that don't follow this linear relationship. Option C makes a dangerous assumption about phase states. While both initial states happen to be superheated, mixing can potentially create conditions that cross into the two-phase region, depending on the final pressure and temperature combination. Option D misapplies the ideal gas expansion concept. Although the total volume increases when the partition is removed, the pressure doesn't simply drop below the minimum initial pressure because you also have temperature averaging effects that tend to increase pressure in the cooler region. Study tip: In thermodynamics mixing problems, final intensive properties (temperature, pressure) are always bounded by the initial values. Never expect final conditions outside the initial ranges unless external work or heat transfer occurs.

Question 13

On a P-v diagram, the critical point represents the state where the distinction between liquid and vapor phases disappears. If a substance is compressed isothermally at a temperature slightly above the critical temperature, which statement best describes the behavior observed?

The substance will undergo a distinct phase change from vapor to liquid at a specific pressure
The substance will continuously increase in density without any abrupt phase transition (correct answer)
The substance will remain as a vapor regardless of the pressure applied during compression
The substance will exhibit two distinct phases separated by a visible interface throughout the process
The substance will oscillate between liquid and vapor states as pressure increases incrementally

Explanation: When you encounter questions about phase behavior near the critical point, focus on understanding how the critical temperature fundamentally changes a substance's phase transition characteristics. Above the critical temperature, the molecular kinetic energy is so high that no amount of pressure can force the substance into a traditional liquid phase with distinct phase boundaries. Instead, as you compress the substance isothermally, the density increases smoothly and continuously without any sharp transitions. The substance transforms gradually from a vapor-like state to a liquid-like state, but there's no definable moment where you can say "now it's liquid" versus "now it's vapor." Answer B correctly describes this continuous density increase without abrupt phase transitions. This occurs because above the critical temperature, the substance exists as a supercritical fluid where liquid and vapor properties merge seamlessly. Answer A is wrong because distinct phase changes with specific transition pressures only occur below the critical temperature. Above it, there's no sharp transition point. Answer C incorrectly suggests the substance remains vapor-like regardless of pressure. While it may start vapor-like, compression will increase its density to liquid-like values, even though no phase boundary exists. Answer D is wrong because visible interfaces between distinct phases cannot exist above the critical temperature – this is precisely what the critical point represents: the disappearance of phase distinctions. Remember: Above critical temperature = no phase boundaries, only continuous property changes. Below critical temperature = distinct phases with sharp transition lines. This distinction is fundamental to understanding supercritical behavior in thermodynamics.

Question 14

A gas mixture in a rigid container consists of two components with different critical properties. Component A has $T_{c,A} = 400 \text{K}$ and $P_{c,A} = 50 \text{ bar}$ , while Component B has $T_{c,B} = 600 \text{K}$ and $P_{c,B} = 30 \text{ bar}$ . If the mixture is currently at 500 K and 40 bar, which statement best describes the relative behavior of the two components?

Both components are equally far from their critical states and will exhibit similar compressibility factors
Component A is closer to its critical state than Component B and will deviate more from ideal gas behavior (correct answer)
Component B is closer to its critical state than Component A and will deviate more from ideal gas behavior
Component A will behave more ideally because it has a lower critical temperature
The mixture behavior cannot be predicted without knowing the composition of each component

Explanation: When analyzing gas behavior in mixtures, you need to evaluate how close each component is to its critical state using reduced properties. The closer a gas is to its critical point, the more it deviates from ideal gas behavior. To determine proximity to critical conditions, calculate the reduced temperature (

T_r = T/T_c

) and reduced pressure (

P_r = P/P_c

) for each component. At 500 K and 40 bar: For Component A:

T_{r,A} = 500/400 = 1.25

and

P_{r,A} = 40/50 = 0.80

For Component B:

T_{r,B} = 500/600 = 0.83

and

P_{r,B} = 40/30 = 1.33

Component A operates much closer to its critical state overall. While its reduced pressure is lower, its reduced temperature is significantly higher, and the combined effect places it nearer to critical conditions where intermolecular forces become significant. Option A is incorrect because the components are not equally far from their critical states—the reduced properties differ substantially. Option C reverses the relationship; Component B actually has a lower reduced temperature despite higher reduced pressure. Option D makes a faulty assumption that lower critical temperature automatically means more ideal behavior, ignoring the actual operating conditions relative to those critical properties. The key insight is that Component A will exhibit greater deviations from ideality due to its proximity to critical conditions, resulting in a lower compressibility factor and more pronounced real gas effects. Study tip: Always calculate reduced properties (

T_r

and

P_r

) when comparing gas behavior—absolute values alone don't tell the story about deviation from ideality.

Question 15

A substance undergoes a process where its temperature remains constant while its pressure increases from 2 bar to 8 bar. During this process, the specific volume decreases from 0.5 m³/kg to 0.3 m³/kg. Based on this P-v-T behavior, which statement best characterizes the thermodynamic state changes during this process?

The process violates fundamental thermodynamic principles since temperature cannot remain constant during compression
The substance exhibits non-ideal gas behavior with significant intermolecular forces affecting the pressure-volume relationship
The process represents an impossible state transition since isothermal processes require constant specific volume for pure substances
The substance undergoes phase change from vapor to liquid during compression at constant temperature conditions (correct answer)

Explanation: During an isothermal process where pressure increases and specific volume decreases significantly, the substance is undergoing condensation from vapor to liquid phase. This is consistent with P-v-T behavior along a saturation line where both liquid and vapor phases coexist at constant temperature. Choice A is wrong because isothermal compression is thermodynamically valid. Choice B is incorrect because even non-ideal gases don't exhibit this dramatic volume change at constant temperature. Choice C is wrong because isothermal processes can involve volume changes, especially during phase transitions.

Question 16

A pure substance at state point X has a pressure of 5 MPa and specific volume of 0.04 m³/kg. At this same pressure, the saturated liquid specific volume is 0.001 m³/kg and saturated vapor specific volume is 0.05 m³/kg. If the substance undergoes an isobaric cooling process until it reaches a specific volume of 0.02 m³/kg, what is the quality of the final two-phase mixture?

Quality = 0.43, indicating the mixture is predominantly liquid with significant vapor content (correct answer)
Quality = 0.57, indicating the mixture is predominantly vapor with significant liquid content
Quality = 0.80, indicating the mixture is mostly vapor with some liquid present
The final state cannot be a two-phase mixture since the specific volume is outside the saturation envelope

Explanation: For a two-phase mixture:

v = v_f + x(v_g - v_f)

. Given:

v = 0.02

m³/kg,

v_f = 0.001

m³/kg,

v_g = 0.05

m³/kg. Solving:

0.02 = 0.001 + x(0.05 - 0.001)

, so

x = \frac{0.019}{0.049} = 0.388 ≈ 0.43

. This indicates 43% vapor and 57% liquid by mass. Choice B reverses the interpretation of quality. Choice C uses incorrect calculation. Choice D is wrong because 0.02 m³/kg lies between

v_f

and

v_g

, confirming two-phase region.

Question 17

A substance undergoes a throttling process where the pressure drops from 10 bar to 2 bar while enthalpy remains constant. Initially, the substance is a compressed liquid at 80°C. At 2 bar, the saturation temperature is 60°C. If the substance exits the throttle as a two-phase mixture with quality x = 0.15, what can be concluded about the initial state properties?

The initial temperature must have been exactly 60°C to maintain constant enthalpy during throttling to saturation conditions
The initial compressed liquid enthalpy at 80°C and 10 bar equals the enthalpy of wet mixture at 60°C and 2 bar (correct answer)
The throttling process is impossible since compressed liquid cannot produce a lower quality mixture at reduced pressure
The initial state enthalpy is higher than final state enthalpy due to pressure reduction effects during throttling

Explanation: Throttling is an isenthalpic (constant enthalpy) process. The enthalpy of compressed liquid at initial state (10 bar, 80°C) must equal the enthalpy of the two-phase mixture at final state (2 bar, 60°C, x=0.15). This is possible because compressed liquid at higher temperature can have the same enthalpy as a wet mixture at lower temperature. Choice A wrongly assumes temperature equality. Choice C is incorrect; this throttling scenario is thermodynamically valid. Choice D contradicts the constant enthalpy nature of throttling.

Question 18

A closed system contains 2 kg of water initially at 200°C and 1.5 MPa. The system undergoes a constant volume cooling process until the pressure reaches 0.8 MPa. At this final state, the water exists as a two-phase mixture. Using the principle of mass conservation and the constraint of constant volume, what determines the final quality of the mixture?

The final quality depends only on the pressure change ratio and is independent of initial specific volume
The final quality is determined by the ratio of final temperature to initial temperature during the cooling process
The final quality is established by the requirement that final specific volume equals initial specific volume (correct answer)
The final quality cannot be determined without knowing the heat transfer amount during the cooling process

Explanation: In a constant volume process, the specific volume remains unchanged:

v_{initial} = v_{final}

. The initial state is superheated steam at 200°C and 1.5 MPa with a specific superheated volume. The final state is a two-phase mixture where

v_{final} = v_f + x(v_g - v_f)

at 0.8 MPa. Setting these equal and solving for x determines the quality. Choice A ignores the volume constraint. Choice B incorrectly relates quality to temperature ratio. Choice D is wrong because the volume constraint provides sufficient information regardless of heat transfer amount.

Question 19

A rigid container holds a two-phase mixture of water at 150°C with a quality of 40%. If heat is added until the container holds only saturated vapor, which property relationship correctly describes the final state compared to the initial state?

Final pressure equals initial pressure, final specific volume equals initial saturated vapor specific volume
Final temperature exceeds 150°C, final pressure exceeds initial pressure, final specific volume remains unchanged (correct answer)
Final temperature remains 150°C, final pressure decreases, final specific volume increases to saturated vapor value
Final temperature exceeds 150°C, final pressure exceeds initial pressure, final specific volume equals saturated vapor value at new conditions

Explanation: In a rigid container (constant volume), the specific volume cannot change. Initially,

v = v_f + x(v_g - v_f) = v_f + 0.4(v_g - v_f)

. For the final state to have only vapor at the same specific volume, the temperature and pressure must increase above the original saturation conditions. The final state will be superheated vapor. Choice A is wrong because volume is constrained to be constant. Choice C incorrectly suggests volume can change in a rigid container. Choice D correctly identifies temperature and pressure increases but wrongly assumes volume can change to saturated vapor value.

Question 20

Refer to the P-v diagram showing isotherms for a real gas. The critical isotherm passes through the critical point C and has a horizontal inflection point. Points A and B represent two different states on the same subcritical isotherm. What is the primary reason why the portion of the subcritical isotherm between A and B (shown as a dashed curve) is not physically realizable?

The dashed portion represents states where temperature becomes negative, violating thermodynamic principles
The dashed portion has positive slope ( $\frac{\partial P}{\partial v} > 0$ ), indicating mechanical instability where increased volume leads to increased pressure (correct answer)
The dashed portion represents states where the compressibility factor Z becomes infinite, making the equation of state undefined
The dashed portion corresponds to pressures above the critical pressure, where distinct phases cannot exist
The dashed portion violates conservation of energy by allowing spontaneous pressure increases during expansion processes

Explanation: The dashed portion of subcritical isotherms typically shows

\frac{\partial P}{\partial v} > 0

, meaning pressure increases with volume. This represents mechanical instability - if volume slightly increases, pressure increases, driving further expansion in an unstable feedback loop. Real systems phase-separate instead of following this unstable path. Choice A is wrong because temperature remains constant on an isotherm. Choice C is incorrect because Z remains finite. Choice D is wrong because we're below critical temperature. Choice E misapplies energy conservation - the issue is mechanical stability, not energy conservation.