Statics Quiz: Tension Vs Compression In Trusses
20 questions · exam conditions
0:00
Tension Vs Compression In TrussesQuestion 1 of 20

A Warren truss supports a concentrated load at the center panel point. If the top chord members adjacent to the loaded joint both carry 15 kN, what can be concluded about these members?

Both members are in tension because they resist the applied load directly
Both members are in compression because they form the top chord
One member is in tension and the other is in compression to maintain equilibrium
Both members are in compression because they push against the loaded joint
The force type cannot be determined without knowing the support conditions
← Back to quizzes

Statics Quiz

Statics Quiz: Tension Vs Compression In Trusses

Practice Tension Vs Compression In Trusses in Statics with focused quiz questions that help you check what you know, review explanations, and build confidence with test-style prompts.

What this quiz covers

This quiz focuses on Tension Vs Compression In Trusses, giving you a quick way to practice the rules, question types, and explanations that matter most for Statics.

How to use this quiz

Try each quiz question before looking at the correct answer. Use the explanations to review missed ideas, then come back to similar questions until the pattern feels familiar.

All questions

Question 1

A Warren truss supports a concentrated load at the center panel point. If the top chord members adjacent to the loaded joint both carry 15 kN, what can be concluded about these members?

  1. Both members are in tension because they resist the applied load directly
  2. Both members are in compression because they form the top chord
  3. One member is in tension and the other is in compression to maintain equilibrium
  4. Both members are in compression because they push against the loaded joint (correct answer)
  5. The force type cannot be determined without knowing the support conditions
Explanation: When analyzing truss members, you need to consider how forces flow through the structure and how each member responds to maintain equilibrium at every joint. In a Warren truss with a concentrated load applied at the center top panel point, that downward force must be transmitted through the structure to the supports. The top chord members adjacent to the loaded joint are positioned to carry this load by pushing away from the joint toward the supports. This pushing action means both members are in compression - they're being squeezed between the loaded joint and the rest of the truss structure. Answer D correctly identifies that both members are in compression because they push against the loaded joint. The applied load creates internal forces that compress these top chord members as they transfer the load toward the supports. Answer A incorrectly assumes tension. While these members do resist the applied load, they do so through compression, not tension. Answer B gives the right conclusion (compression) but for the wrong reason - it's not simply because they're top chord members, but because of how the specific loading creates internal forces. Answer C suggests one member is in tension and one in compression, which would violate equilibrium at the loaded joint since the applied force is purely vertical and the truss geometry is symmetric. For truss problems, always trace the load path and consider whether each member is being pushed (compression) or pulled (tension) based on how forces must flow through the structure to reach the supports.

Question 2

A symmetric king-post truss carries equal loads at the quarter points of the bottom chord. If the vertical member (king post) carries 12 kN in compression, what can be determined about the diagonal web members?

  1. Both diagonal members are in tension with equal magnitudes (correct answer)
  2. Both diagonal members are in compression with equal magnitudes
  3. One diagonal is in tension and the other is in compression
  4. Both diagonal members carry 6 kN each due to load symmetry
  5. The diagonal forces cannot be determined from the given information
Explanation: When analyzing symmetric trusses, symmetry in geometry and loading creates predictable force patterns. For a king-post truss with symmetric loading, you need to consider how forces flow through the structure to maintain equilibrium. Since the truss is symmetric and carries equal loads at the quarter points, the vertical king post experiences compression from the downward loads being transferred through the structure. Given that this member carries 12 kN in compression, you can determine the diagonal web member forces through equilibrium analysis. In this configuration, both diagonal web members must carry tension forces of equal magnitude. The downward loads create compression in the king post, but the diagonal members must "pull" to help transfer these loads to the supports. Due to the symmetric geometry and loading, both diagonals experience identical tension forces to maintain equilibrium. Looking at the incorrect options: B suggests both diagonals are in compression, but this would create an unstable configuration where no members resist the outward thrust. C implies asymmetric forces (one tension, one compression), which contradicts the symmetric loading and geometry. D incorrectly assumes the diagonal forces equal half the king post force due to "load symmetry" - this oversimplifies the force transfer mechanism and ignores the geometric relationships that actually govern member forces. Study tip: In symmetric trusses with symmetric loading, corresponding members on each side carry equal forces of the same type (both tension or both compression). Always check your force directions against the overall load path from applied forces to supports.

Question 3

A Pratt truss has vertical web members and diagonal web members. Under typical gravity loading, which statement correctly describes the web member behavior?

  1. All vertical members are in tension and all diagonal members are in compression
  2. All vertical members are in compression and all diagonal members are in tension (correct answer)
  3. Vertical members alternate between tension and compression along the span
  4. All web members carry the same magnitude of force regardless of type
  5. The web member forces are independent of the chord member forces
Explanation: When analyzing truss behavior, you need to understand how loads transfer through the structure and create internal forces in different member types. In a Pratt truss under gravity loading, the load path creates a predictable pattern of internal forces. Vertical members connect the top and bottom chords directly, and since gravity loads push downward on the top chord, these vertical members must push down as well to transfer the load - putting them in compression. The diagonal members, however, work differently. They're positioned to carry loads at an angle between the chords, and the geometry of the truss forces them to be pulled apart, creating tension forces. Looking at the wrong answers: Choice A reverses the actual behavior - it incorrectly suggests verticals are in tension and diagonals are in compression, which contradicts the load transfer mechanism. Choice C suggests alternating tension and compression in vertical members, but under uniform gravity loading, all verticals behave similarly since they all transfer downward loads in the same manner. Choice D claims equal force magnitudes regardless of member type, which ignores both the different orientations of these members and the varying loads they carry based on their position in the truss. The correct answer is B - vertical members are in compression while diagonal members are in tension. Remember this pattern: in Pratt trusses under gravity loads, think "Verticals push down (compression), Diagonals pull apart (tension)." This fundamental behavior pattern appears frequently in structural analysis problems, so understanding the underlying load transfer mechanism will serve you well beyond just this question type.

Question 4

A student correctly determines that member AB has a compressive force of 20 kN. When asked to show this force on a free body diagram of joint A, which representation is correct?

  1. An arrow pointing away from joint A along member AB
  2. An arrow pointing toward joint A along member AB (correct answer)
  3. An arrow perpendicular to member AB at joint A
  4. Two arrows in opposite directions along member AB
  5. An arrow pointing away from joint A with magnitude 20 kN labeled as compression
Explanation: When analyzing forces in structural members, you must carefully distinguish between the internal force within a member and how that force appears on a free body diagram of a joint. The correct answer is B because when a member is in compression, it's being "pushed together" from both ends. On a free body diagram of joint A, you show the force that member AB exerts on the joint. Since member AB is compressed, it pushes against joint A, so the force arrow points toward the joint along the member's axis. Let's examine why the other options are incorrect: A is wrong because an arrow pointing away from the joint would represent tension, not compression. This is the most common error students make—confusing the direction of the internal force with how it appears on the joint's free body diagram. C is incorrect because forces in truss members act along the member's axis, never perpendicular to it. A perpendicular force would indicate bending, which doesn't occur in ideal truss analysis. D is wrong because you only show one force arrow per member on a joint's free body diagram. Two opposite arrows would cancel each other out and represent no net force. Study tip: Remember this key distinction—the internal force direction (how we describe compression vs. tension) is opposite to how the force appears on a joint's free body diagram. Compression means the member pushes on the joint (arrow toward joint), while tension means the member pulls on the joint (arrow away from joint).

Question 5

A student uses the method of joints and consistently assumes all unknown member forces act in tension (pulling away from each joint). After solving the equilibrium equations, member PQ has a calculated force of -25 kN. What should the student conclude?

  1. Member PQ carries a tensile force of 25 kN in the direction assumed
  2. Member PQ carries a compressive force of 25 kN opposite to the assumed direction (correct answer)
  3. The calculation contains an error since forces cannot be negative
  4. Member PQ is a zero-force member and carries no load
  5. The assumed direction must be changed and the calculation repeated
Explanation: When using the method of joints in truss analysis, you establish a sign convention at the beginning—typically assuming all unknown forces act in tension (pulling away from the joint). The key insight is that negative results don't indicate errors; they reveal the actual direction of the force. When your equilibrium equations yield a negative force value, this means your initial assumption about the force direction was incorrect. A calculated force of -25 kN for member PQ tells you that the member actually experiences a 25 kN force in the opposite direction from what you assumed. Since you assumed tension, the negative result indicates the member is actually in compression with a magnitude of 25 kN. Looking at the answer choices: Choice A incorrectly suggests the force acts in the assumed direction despite the negative sign. Choice C reflects a common misconception—negative forces are perfectly valid and meaningful in structural analysis, not calculation errors. Choice D misinterprets the negative sign as indicating zero force, when it actually indicates a force of significant magnitude (25 kN) in the opposite direction. The correct answer is B: Member PQ carries a compressive force of 25 kN opposite to the assumed direction. Study tip: Always remember that in structural analysis, the sign of your result tells you about direction relative to your assumption, while the magnitude tells you the force's strength. Negative doesn't mean wrong—it means "opposite direction." This sign convention is crucial for correctly interpreting your solutions in both method of joints and method of sections problems.

Question 6

Two engineers analyze the same truss using different approaches: Engineer A uses the method of joints starting from the supports, while Engineer B uses the method of sections. For member RS, Engineer A determines tension and Engineer B determines compression. What is the most likely explanation?

  1. The method of sections is more accurate for interior members like RS
  2. One engineer made a sign convention error in interpreting the results (correct answer)
  3. The method of joints is only valid for members connected to supports
  4. Different methods can give different results for statically indeterminate structures
  5. One engineer incorrectly identified member RS in the truss layout
Explanation: When analyzing trusses, both the method of joints and method of sections are equally valid and must yield identical results for any given member in a statically determinate structure. If two engineers get opposite results (tension vs. compression) for the same member, it indicates a calculation or interpretation error, not a fundamental difference between methods. The most likely culprit is a sign convention error during result interpretation. In truss analysis, you assume each member is either in tension or compression, then let your calculations reveal the true state. If your math yields a negative result, it means your initial assumption was wrong—the member experiences the opposite force type. Engineer A or B likely forgot to flip their assumption when they got a negative answer, leading to the contradictory conclusions about member RS. Looking at the incorrect options: (A) is wrong because neither method is inherently more accurate—both are exact analytical techniques when applied correctly. (C) is false since the method of joints works for any joint in the truss, not just those at supports. (D) misses the mark because the problem states this is the same truss analyzed by both engineers—if it were statically indeterminate, both methods would require additional information and wouldn't necessarily give definitive answers. Study tip: When practicing truss problems, always double-check your sign conventions. If you assume tension and get a negative result, the member is actually in compression. This sign convention error is one of the most common mistakes in structural analysis.

Question 7

Two students analyze the same truss but get different signs for member XY: Student A reports +15 kN and Student B reports -15 kN. Both used correct equilibrium equations. What is the most likely explanation?

  1. One student made a calculation error in applying the equilibrium equations
  2. The students used different sign conventions for tension and compression (correct answer)
  3. One student incorrectly identified the member orientation in the truss
  4. The students analyzed different loading conditions on the same truss
  5. One student used the method of joints while the other used the method of sections
Explanation: When analyzing trusses, the key concept being tested here is understanding sign conventions for internal forces. In structural analysis, there are two common approaches: you can assume a member is in tension and assign positive values to tension, or assume compression and assign positive values to compression. The correct answer is B because both students likely performed their calculations correctly but used opposite sign conventions. If Student A used the convention where tension is positive, a +15 kN result means the member is in tension. If Student B used the convention where compression is positive, their -15 kN result indicates the same physical state (tension) but with opposite sign notation. The actual internal force magnitude and type are identical - only the sign representation differs. Option A is incorrect because the problem states both students used correct equilibrium equations, eliminating calculation errors as the cause. Option C is wrong because member orientation errors would typically result in different force magnitudes or directions, not just opposite signs of the same value. Option D is incorrect since the problem explicitly states they analyzed "the same truss," implying identical loading conditions. Remember this key strategy: when you see identical force magnitudes with opposite signs in structural analysis, immediately consider sign convention differences. Different textbooks and instructors often use different conventions, so always establish your sign convention clearly at the beginning of any problem and stay consistent throughout your analysis.

Question 8

A student analyzes a simple truss and determines that member PQ has a force of -8 kN using the tension-positive sign convention. The student then switches to a compression-positive sign convention. What should the force in member PQ be reported as under the new convention?

  1. -8 kN, because the actual force direction doesn't change
  2. +8 kN, and the member is now considered to be in tension
  3. +8 kN, and the member is still in compression (correct answer)
  4. -8 kN, but the member is now in tension instead of compression
  5. 0 kN, because changing sign conventions neutralizes the force
Explanation: When analyzing truss members, you need to understand that sign conventions are just accounting systems - they don't change the actual physical forces, only how we represent them mathematically. The original analysis found member PQ has a force of -8 kN under a tension-positive convention. The negative sign tells us the member is in compression (opposite of the positive tension direction). When you switch to a compression-positive convention, you're simply flipping your reference frame - now compression is considered positive instead of negative. Since the member is physically in compression, and compression is now the positive direction, the force becomes +8 kN. The member remains in compression throughout this process. This makes answer C correct: the force is reported as +8 kN, and the member is still in compression. Let's examine why the other options fail: Answer A incorrectly suggests keeping the same numerical value and sign when the convention changes. Answer B makes a critical error by claiming the member is now in tension - the physical state never changes, only our mathematical representation. Answer D combines two mistakes: keeping the negative sign under a compression-positive convention and incorrectly stating the member switched from compression to tension. Remember this key principle: changing sign conventions only affects the mathematical representation (+/-), never the actual physical behavior of structural members. Always ask yourself: "What is the member actually doing physically?" Then apply the appropriate sign based on your chosen convention.

Question 9

A bridge truss analysis reveals that a particular diagonal member experiences tension during truck loading but compression during wind loading. This indicates that:

  1. The member is improperly designed and will fail under combined loading
  2. The analysis contains errors since members cannot change force types
  3. The member must be designed to resist both tension and compression forces (correct answer)
  4. Only the larger of the two force magnitudes needs to be considered in design
  5. The member should be removed since it serves no consistent structural purpose
Explanation: When analyzing truss structures, you'll encounter members that experience different types of forces depending on the loading conditions. This is completely normal and expected in structural engineering. The correct answer is C because real structures face multiple loading scenarios throughout their service life. A diagonal truss member can logically experience tension when the structure deflects one way (like under truck loading) and compression when it deflects differently (like under wind loading). Since you cannot predict which loading condition will occur at any given time, the member must be designed to safely handle both tension and compression forces at their respective maximum magnitudes. Option A is incorrect because experiencing different force types under different loads doesn't indicate improper design—it indicates the member is doing its job of resisting forces as the structure responds to various loads. Option B reflects a fundamental misunderstanding of structural behavior; members absolutely can and do change from tension to compression (or vice versa) depending on loading conditions. This is basic structural mechanics. Option D is dangerously wrong from an engineering perspective because ignoring either the tension or compression capacity could lead to failure when the "smaller" force type actually controls the design due to different material properties or connection details. Remember this key principle: in truss analysis, always consider all possible loading combinations. Members that can experience both tension and compression are called "reversible members" and require careful attention to both force types in design.

Question 10

Two identical trusses are loaded differently: Truss A has point loads at the top chord joints, while Truss B has the same total load applied as a uniformly distributed load along the top chord. Comparing the chord member forces, which statement is most accurate?

  1. Both trusses will have identical chord member forces throughout
  2. Truss A will have larger maximum chord forces than Truss B
  3. Truss B will have larger maximum chord forces than Truss A
  4. The chord force magnitudes will differ but the tension/compression patterns will be identical (correct answer)
  5. Only the web member forces will differ between the two trusses
Explanation: When analyzing truss behavior, the key principle is that load distribution dramatically affects internal forces, even when total applied load remains constant. The way loads are applied—concentrated versus distributed—creates different internal force patterns throughout the structure. Both loading scenarios will produce the same overall structural response in terms of reactions and deflection patterns, which means the tension and compression patterns in chord members remain identical. Top chords will be in compression, bottom chords in tension, following the same general distribution. However, the magnitudes of these forces will differ significantly. With point loads (Truss A), forces concentrate at specific joints and create localized peaks, but the loads transfer directly through the truss joints to other members. With uniformly distributed loads (Truss B), the continuous loading along the top chord creates a more complex internal force distribution. The distributed load essentially adds bending effects to the top chord between panel points, and when this loading is resolved into equivalent joint loads for analysis, it typically results in higher peak member forces than the discrete point loading case. Choice A is incorrect because different load distributions cannot produce identical internal forces. Choice B reverses the relationship—distributed loads generally create higher internal forces than equivalent point loads. Choice C incorrectly suggests Truss B has larger forces, when the distributed loading actually creates more severe internal conditions than point loads. Study tip: Remember that distributed loads on trusses typically create higher member forces than equivalent point loads due to the way continuous loading interacts with the structural geometry between joints.

Question 11

When using the method of joints to analyze a truss, if joint S has three members meeting at it and the analysis yields: FSTcos⁡(45°)+FSUcos⁡(30°)=0F_{ST}\cos(45°) + F_{SU}\cos(30°) = 0 and FSTsin⁡(45°)+FSUsin⁡(30°)+FSV=50F_{ST}\sin(45°) + F_{SU}\sin(30°) + F_{SV} = 50, where all forces were initially assumed as tension, what can be determined about the actual member forces?

  1. Members ST and SU are both in compression, while SV is in tension
  2. Members ST and SU have opposite force types, while SV is in compression (correct answer)
  3. All three members are in tension with magnitudes determined by solving the system
  4. Member SV is in compression, while ST and SU force types depend on equation solutions
Explanation: From the first equation, F_ST cos(45°) = -F_SU cos(30°), which means F_ST and F_SU have opposite signs when solved. Since both were assumed as tension, one will be positive (actually tension) and one negative (actually compression). From the second equation, since sin(45°) ≈ 0.707, sin(30°) = 0.5, and the constant is positive 50, the value of F_SV will be negative when solved, indicating compression (opposite to the tension assumption).

Question 12

In a truss analysis, if joint K has four members meeting at it (KL, KM, KN, and KP) with external load Q applied, and the preliminary analysis suggests that both KL and KM are in compression while KN is in tension, what additional information is essential to determine the nature of force in member KP?

  1. The magnitudes of forces in members KL, KM, and KN are sufficient to determine KP through equilibrium
  2. The angles that all four members make with respect to a reference direction at joint K (correct answer)
  3. The support conditions at the opposite ends of members KL, KM, KN, and KP
  4. The material properties and cross-sectional areas of the four members meeting at K
Explanation: To solve for the force in member KP using joint equilibrium, both horizontal and vertical force equilibrium equations must be satisfied at joint K. This requires knowing the directional components of all forces, which depend on the angles each member makes with respect to a coordinate system. Without the geometric angles, the force components cannot be properly calculated, making it impossible to solve the equilibrium equations even if the magnitudes of forces in other members are known.

Question 13

In the planar truss shown, joint B is subjected to both a horizontal and vertical external force. Using the method of joints, which approach correctly determines whether member AB is in tension or compression?

  1. Assume member AB is in tension, apply equilibrium at joint B, and check if the result is positive (correct answer)
  2. Calculate the resultant of the external forces and compare it to the member orientation
  3. Use the method of sections to cut through member AB and analyze the left portion
  4. Assume member AB pushes on joint B, apply equilibrium, and verify the assumption based on the sign
  5. Determine the support reactions first, then work progressively through each joint starting from the supports
Explanation: The method of joints requires assuming a force direction (typically tension), writing equilibrium equations, and interpreting the sign of the result. If positive, the assumption was correct (tension); if negative, the member is actually in compression. Choice B doesn't use method of joints. Choice C describes method of sections, not joints. Choice D assumes compression initially, which is less conventional. Choice E describes a valid sequence but doesn't address the specific question about determining tension vs compression.

Question 14

In the cantilever truss shown, a horizontal load is applied at the free end. Which statement correctly describes the force distribution in the top and bottom chord members?

  1. All top chord members are in compression and all bottom chord members are in tension
  2. All top chord members are in tension and all bottom chord members are in compression (correct answer)
  3. The chord member forces alternate between tension and compression along the length
  4. Both top and bottom chord members have the same type of force throughout
  5. The force types depend on the magnitude of the applied horizontal load
Explanation: In a cantilever truss with horizontal loading at the free end, the structure bends with the top chord in tension and bottom chord in compression, opposite to a simply supported beam. This is because the cantilever must resist the overturning moment through internal forces. Choice A reverses the correct force types. Choice C incorrectly suggests alternating forces. Choice D is incorrect because top and bottom chords have opposite force types. Choice E is wrong because the force types are determined by structural behavior, not load magnitude.

Question 15

In the space truss shown, joint O is connected to three members in different planes. If joint O is in equilibrium under three concurrent forces, what constraint applies to the member forces?

  1. All three member forces must have the same magnitude for equilibrium
  2. At least one member must be in tension and one must be in compression
  3. The vector sum of the three member forces must equal zero (correct answer)
  4. All three members must be either in tension or all in compression
  5. The member forces must be proportional to their respective lengths
Explanation: For equilibrium at any joint, the vector sum of all forces (including member forces) must equal zero. This is the fundamental equilibrium requirement and applies regardless of whether the members are in tension or compression. Choice A incorrectly requires equal magnitudes. Choice B incorrectly requires specific force types. Choice D incorrectly limits the force type combinations. Choice E incorrectly relates forces to member lengths rather than equilibrium requirements.

Question 16

In the asymmetric truss shown, joint C has no external load applied. When analyzing this joint for equilibrium, which statement about the member forces at joint C is correct?

  1. All members connected to joint C must be zero-force members
  2. The forces in members connected to joint C must sum vectorially to zero (correct answer)
  3. At least one member at joint C must carry the same force as the adjacent loaded joint
  4. The member forces at joint C are independent of forces at other joints
  5. Joint C can only be in equilibrium if it connects exactly two members
Explanation: Equilibrium at any joint requires that all forces (member forces in this case, since no external load is applied) sum vectorially to zero. This applies regardless of the number of members or the loading at other joints. Choice A is incorrect because zero-force members only occur under specific geometric conditions. Choice C makes an unjustified connection to other joints. Choice D ignores the continuity of forces through the structure. Choice E incorrectly limits the number of members for equilibrium.

Question 17

In the loaded truss shown below, the method of sections is used by cutting through members 1, 2, and 3. If member 1 is found to be in tension with magnitude F₁, what does this tell us about how member 1 acts on the left section?

  1. Member 1 pulls the left section toward the right section
  2. Member 1 pushes the left section away from the right section
  3. Member 1 exerts no net force on the left section
  4. Member 1 creates a moment about the cut but no direct force
Explanation: A

Question 18

In the statically determinate truss shown below, removing member XY would make the structure unstable. Currently, member XY carries a force of 18 kN. This indicates that member XY is:

  1. Definitely in tension because it prevents structural collapse
  2. Definitely in compression because it provides structural support
  3. Either in tension or compression, but this cannot be determined from stability considerations alone
  4. A zero-force member that provides stability but carries no load
Explanation: C

Question 19

A truss member PQ is analyzed and found to have an internal force of 25 kN. During the analysis, if the member was initially assumed to be in tension but the final calculated value is negative (-25 kN), and subsequently the same member is analyzed assuming compression with the result being positive (+25 kN), what is the actual state of member PQ?

  1. Member PQ is in tension with magnitude 25 kN regardless of initial assumption
  2. Member PQ is in compression with magnitude 25 kN regardless of initial assumption (correct answer)
  3. The analysis is inconsistent and indicates an error in the calculation method
  4. Member PQ alternates between tension and compression depending on analysis approach
Explanation: The actual physical state of the member is independent of the initial assumption made during analysis. When assumed in tension and getting a negative result (-25 kN), this means the actual force is opposite to the assumption, indicating compression of 25 kN. When assumed in compression and getting a positive result (+25 kN), this confirms the assumption was correct. Both analyses consistently show the member is in compression with 25 kN magnitude.

Question 20

For a statically determinate truss under a given loading condition, if the method of joints reveals that member DE has a force magnitude of 25 kN, and the method of sections cutting through members DE, EF, and FG gives the same member DE with a force magnitude of 25 kN but opposite sign convention, what is the most likely explanation?

  1. The truss analysis contains an error since both methods must yield identical results
  2. Different sign conventions were used where tension was assumed positive in one method and negative in the other (correct answer)
  3. The method of sections is more accurate for interior members like DE
  4. The loading condition creates different internal forces depending on the analysis method used
Explanation: Both the method of joints and method of sections must yield the same magnitude and type of force (tension or compression) for any member in a statically determinate truss. If the magnitudes are identical but the signs are opposite, this indicates different sign conventions were applied. In method of joints, forces are often assumed as tension (pulling away from the joint), while in method of sections, the assumed direction of internal forces on the cut members may follow a different convention.