Statics Quiz: Method Of Sections
20 questions · exam conditions
0:00
Method Of SectionsQuestion 1 of 20

For a Warren truss loaded with vertical forces, when applying the method of sections to find the force in a diagonal web member, why is it often advantageous to take moments about the intersection point of the other two cut members?

Because it eliminates the need to calculate reaction forces at the supports
Because it reduces the number of unknown forces in the section to exactly one
Because it automatically satisfies the horizontal force equilibrium condition
Because it eliminates computational errors associated with trigonometric calculations
Because it provides the most accurate result compared to other moment points
← Back to quizzes

Statics Quiz

Statics Quiz: Method Of Sections

Practice Method Of Sections in Statics with focused quiz questions that help you check what you know, review explanations, and build confidence with test-style prompts.

What this quiz covers

This quiz focuses on Method Of Sections, giving you a quick way to practice the rules, question types, and explanations that matter most for Statics.

How to use this quiz

Try each quiz question before looking at the correct answer. Use the explanations to review missed ideas, then come back to similar questions until the pattern feels familiar.

All questions

Question 1

For a Warren truss loaded with vertical forces, when applying the method of sections to find the force in a diagonal web member, why is it often advantageous to take moments about the intersection point of the other two cut members?

  1. Because it eliminates the need to calculate reaction forces at the supports
  2. Because it reduces the number of unknown forces in the section to exactly one (correct answer)
  3. Because it automatically satisfies the horizontal force equilibrium condition
  4. Because it eliminates computational errors associated with trigonometric calculations
  5. Because it provides the most accurate result compared to other moment points
Explanation: When analyzing Warren trusses using the method of sections, you're essentially cutting through the truss and applying equilibrium equations to solve for member forces. The strategic choice of where to take moments can dramatically simplify your calculations. Taking moments about the intersection point of two cut members is a powerful technique because those two forces create zero moment about that point (their lines of action pass through the moment center). This mathematical elimination leaves you with only one unknown force contributing to the moment equation - the diagonal member you're trying to find. You can then solve directly for that force without first determining the other cut member forces. Looking at the wrong answers: Choice A is incorrect because eliminating reaction calculations isn't the primary advantage here - you often still need reactions for other equilibrium equations. Choice C misses the point entirely; taking moments about a specific point doesn't automatically satisfy horizontal force equilibrium - that's a separate equation you must check. Choice D is wrong because this moment strategy doesn't eliminate trigonometry; you'll still need to account for the geometric relationships and force components in your moment calculations. The key insight is that moment equilibrium about a carefully chosen point reduces your system from multiple unknowns to a single unknown, making the solution immediate and direct. Study tip: When using the method of sections, always look for moment centers that eliminate the maximum number of unknown forces. This "strategic elimination" approach will save you significant time and reduce algebraic complexity on exams.

Question 2

In applying the method of sections to determine forces in truss members, which of the following statements about the choice of the free body diagram is most accurate?

  1. The left section should always be analyzed because it typically involves simpler calculations
  2. The section with fewer external loads should be selected to minimize computational complexity
  3. Either section can be analyzed, but the section chosen should make the moment center selection more convenient (correct answer)
  4. The right section should be analyzed when the member of interest is closer to the right support
  5. The section containing the larger reaction force should be avoided to prevent calculation errors
Explanation: The method of sections is a powerful technique for analyzing truss members by cutting through the truss and examining the equilibrium of one portion. A key insight is that both sections created by the cut are in equilibrium, so you have the flexibility to choose which one to analyze. The correct approach is option C: either section can be analyzed, but your choice should prioritize convenience in selecting moment centers. When you cut a truss, you typically expose three unknown member forces. To solve for a specific member force efficiently, you want to choose a moment center that eliminates two of these unknowns from your moment equation, leaving only the desired force. Sometimes the left section provides a more convenient moment center for this purpose, sometimes the right section does. Option A is incorrect because the left section isn't inherently simpler—complexity depends on the specific truss geometry and loading, not the section's position. Option B misses the point because the number of external loads doesn't determine computational difficulty; rather, it's about how effectively you can eliminate unknowns through smart moment center selection. Option D incorrectly suggests that proximity to supports determines which section to analyze, but the location of the member of interest doesn't dictate which section will yield simpler calculations. Study tip: When applying the method of sections, always ask yourself: "Which section will let me pick a moment center that eliminates the most unknowns?" This strategic thinking will save you time and reduce calculation errors on exams.

Question 3

When using method of sections for truss analysis, if a section cut results in four unknown member forces instead of three, what is the most appropriate course of action?

  1. Use the method of joints instead, as the method of sections cannot handle this situation
  2. Make an additional section cut to create two separate free body diagrams with three unknowns each
  3. Apply all three equilibrium equations simultaneously and assume one member carries zero force
  4. Relocate the section cut to pass through only three members while still including the member of interest (correct answer)
  5. Apply virtual work methods to supplement the three equilibrium equations available
Explanation: The method of sections is a powerful tool for truss analysis, but it's fundamentally limited by statics equilibrium equations—you can only solve for three unknowns using the three available equations (∑Fx=0\sum F_x = 0, ∑Fy=0\sum F_y = 0, and ∑M=0\sum M = 0). When your section cut intersects four members, you've created an indeterminate situation that requires strategic thinking. The best approach is to relocate your section cut so it passes through only three members while still isolating the member you're trying to analyze. This maintains the method's efficiency while respecting its mathematical constraints. You might need to cut through different members or reposition the cut slightly, but as long as your target member remains on one side of the cut, you can still find its force. Option A is wrong because the method of sections absolutely can handle this situation—you just need to adjust your cutting strategy. Option B creates unnecessary complexity and still doesn't guarantee you'll have only three unknowns in each diagram. Option C violates fundamental principles by making arbitrary assumptions about member forces, which could lead to completely incorrect results. The key insight here is that the method of sections requires planning your cuts carefully. Before making any cut, visualize which members it will intersect and count them. If you get four, step back and find an alternative cutting line. Remember: the method of sections is about strategic cutting, not just randomly slicing through the truss wherever seems convenient.

Question 4

In method of sections analysis, when a cut member is horizontal and you take moments about a point directly above or below that member, what happens to that member's contribution to the moment equation?

  1. The member force is doubled because it acts at both ends of the member
  2. The member force contributes its full magnitude times the vertical distance to the moment center
  3. The member force is eliminated from the equation because its moment arm is zero (correct answer)
  4. The member force contributes only its vertical component to the moment calculation
  5. The member force requires resolution into components parallel to the line connecting to the moment center
Explanation: The method of sections is a powerful technique for analyzing trusses where you "cut" through members and analyze the equilibrium of one section. When taking moments about a point, each force contributes to the moment equation based on its perpendicular distance (moment arm) from that point. When you have a horizontal member and choose a moment center directly above or below it, the line of action of that member's force passes through your moment center. Since moment equals force times perpendicular distance, and the perpendicular distance is zero, the moment contribution becomes F×0=0F \times 0 = 0. This strategically eliminates that unknown force from your moment equation, which is exactly why you choose such moment centers in method of sections problems. Answer A is incorrect because the member force doesn't double - you're analyzing forces at the cut section, not at both original ends of the member. Answer B misses the key point about moment arms; while the vertical distance exists, it's not the perpendicular distance from the force's line of action to the moment center. Answer D incorrectly suggests you break forces into components for moment calculations, but moments use the full force magnitude with the perpendicular distance. The correct answer is C - the member force is eliminated because its moment arm is zero. Study tip: In method of sections, always choose your moment center strategically to eliminate unknown forces whose lines of action pass through that point. This reduces the number of unknowns in your equilibrium equation, making the problem much more manageable.

Question 5

In applying method of sections to truss analysis, when is it necessary to solve simultaneous equations rather than using a single equilibrium equation?

  1. When the section cut passes through more than three members
  2. When all cut members are inclined at different angles to the horizontal
  3. When no single moment center can eliminate two of the three unknown forces (correct answer)
  4. When the loads on the section are not symmetrically distributed
  5. When the truss has more than six panels in total length
Explanation: The method of sections in truss analysis relies on cutting through members and applying equilibrium equations to solve for unknown forces. The key insight is that you have three equilibrium equations available (∑Fx=0\sum F_x = 0, ∑Fy=0\sum F_y = 0, and ∑M=0\sum M = 0), so you can solve for at most three unknowns simultaneously. The most efficient approach is to strategically choose a moment center that eliminates two of the three unknown forces from the moment equation. When the lines of action of two unknown forces pass through your chosen moment center, their moment contributions become zero, leaving you with a single equation containing only one unknown. This allows you to solve directly without simultaneous equations. However, when no single point exists through which two of the three force lines pass, you cannot eliminate two unknowns from any single equation. In this case, you must set up and solve simultaneous equations using multiple equilibrium conditions. Option A is incorrect because you can cut through more than three members if some forces are already known or if the geometry allows strategic moment center selection. Option B is wrong because the angles of inclination don't determine whether simultaneous equations are needed—it's about the geometric relationships between force lines of action. Option D is incorrect because load distribution symmetry doesn't affect whether you can find an appropriate moment center to eliminate unknowns. Study tip: When practicing method of sections, always look first for a point where two unknown force lines intersect—this will be your optimal moment center and help you avoid simultaneous equations.

Question 6

In method of sections analysis, when the moment center is located at the intersection of two cut members' lines of action, but this intersection point lies outside the physical truss structure, what is the correct approach?

  1. Choose a different moment center that lies within the truss boundaries
  2. Extend the member lines mathematically and use the intersection point normally (correct answer)
  3. Apply a correction factor to account for the external moment center location
  4. Use the method of joints instead, since the section method becomes invalid
  5. Approximate the intersection point by using the closest point within the truss structure
Explanation: The method of sections is a powerful tool for analyzing truss forces, especially when you need to find the force in a specific member without solving the entire structure. The key principle is selecting a moment center that eliminates unknown forces from your equilibrium equation, leaving only the desired unknown. When two cut members' lines of action intersect outside the physical truss boundaries, you should extend those lines mathematically and use that intersection point as your moment center normally (Answer B). The beauty of the method of sections lies in mathematics, not physical constraints. Forces act along their lines of action, which extend infinitely in both directions. Using this external intersection point eliminates two unknowns from your moment equation, allowing you to solve directly for the third member's force. Answer A is incorrect because restricting your moment center to within truss boundaries unnecessarily limits your analytical power and often leads to more complex equations with multiple unknowns. Answer C is wrong because no correction factors are needed—the mathematical relationships remain valid regardless of where the intersection point lies. The moment arm calculations and equilibrium equations work identically whether the point is inside or outside the structure. Answer D represents a common misconception that the section method becomes invalid with external intersection points, but this isn't true—the method remains perfectly valid and often more efficient than switching to joints. Remember: In statics, mathematical lines of action extend infinitely. Don't let physical boundaries limit your choice of strategic moment centers—embrace the mathematical abstraction for cleaner solutions.

Question 7

When applying the method of sections to a truss with inclined members, which factor most significantly affects the complexity of the moment equilibrium equation?

  1. The magnitude of the applied loads on the truss
  2. The angles that the cut members make with the horizontal (correct answer)
  3. The distance between the supports of the truss
  4. The number of panels in the complete truss structure
  5. The location of the moment center relative to the reaction points
Explanation: The method of sections is a powerful tool for analyzing trusses by cutting through members and analyzing the equilibrium of one portion. When you encounter inclined members in your cut, the complexity of your analysis changes dramatically based on the geometric relationships involved. The angles that cut members make with the horizontal (Answer B) most significantly affect the complexity of your moment equilibrium equation. Here's why: when you write moment equilibrium about a point, each force creates a moment arm that depends on the perpendicular distance from the point to the force's line of action. For inclined members, you must resolve forces into components and carefully calculate these perpendicular distances using trigonometry. Steep angles or unusual orientations require more complex geometric calculations, while horizontal or vertical members often simplify to basic multiplication. Answer A is incorrect because load magnitudes don't change the form of your equilibrium equations—they only affect the numerical values you calculate. Answer C misses the point because support distance affects overall geometry but doesn't directly impact the moment arm calculations for individual cut members. Answer D is wrong because the total number of panels doesn't influence the complexity of analyzing your specific cut section—you're only concerned with the members you've actually cut through. Study tip: When setting up moment equilibrium for sections with inclined members, always sketch the force directions clearly and identify the perpendicular distances before writing equations. Practice with different cut orientations to build confidence with the trigonometric relationships you'll need.

Question 8

When using the method of sections on a truss, if the moment equation about a chosen point yields a negative value for a member force, and you had assumed the member was in tension, what does this indicate about your analysis?

  1. There is an error in the calculation that must be corrected before proceeding
  2. The member is actually in compression, and the magnitude is the absolute value of the calculated result (correct answer)
  3. The chosen moment center was inappropriate for this particular member analysis
  4. The section cut was made in the wrong location to analyze this member effectively
  5. The loading condition creates an indeterminate situation for this member
Explanation: When analyzing trusses using the method of sections, you make initial assumptions about whether each member is in tension or compression, then let the mathematics reveal the true state of stress. The sign of your calculated result tells you whether your assumption was correct. If you assume a member is in tension but your moment equation yields a negative force value, this simply means the member is actually in compression. The negative sign is the method's way of correcting your assumption - the actual force magnitude is the absolute value of your result, but acting in the opposite direction (compression instead of tension). This is a normal part of the analysis process, not an error. Option A is incorrect because getting a negative result isn't a calculation error - it's meaningful information about the member's actual state. Option C misses the point entirely; any moment center that eliminates unknown forces is valid for analysis. Option D is also wrong because the section cut doesn't determine the sign of your result - the actual forces in the structure do. The key insight is that in structural analysis, we often make educated guesses about force directions and let the calculations correct us. A negative result simply means "opposite direction from what you assumed." Study tip: When doing method of sections problems, don't worry about guessing the correct tension/compression state initially. Focus on making consistent assumptions and setting up your equilibrium equations correctly - the signs in your final answers will automatically tell you the true force directions.

Question 9

In truss analysis using the method of sections, when the lines of action of two cut members are parallel, what approach is most effective for solving the system of equations?

  1. Take moments about any point, since parallel forces will have proportional moment arms
  2. Use force equilibrium in the direction perpendicular to the parallel members first (correct answer)
  3. Take moments about a point on the line of action of the third cut member
  4. Apply the principle of virtual work instead of equilibrium equations
  5. Solve by taking moments about the midpoint between the parallel members
Explanation: When analyzing trusses using the method of sections, you're cutting through members and applying equilibrium equations to solve for unknown forces. The challenge arises when two of the three cut members have parallel lines of action, because this creates a mathematical complication in your system of equations. The most effective strategy is to use force equilibrium in the direction perpendicular to the parallel members first (Answer B). Here's why: when you sum forces perpendicular to the parallel members, those two forces contribute zero to the equilibrium equation since they have no component in that direction. This leaves you with only the third member's force component in that equation, allowing you to solve for it directly. Once you know this force, you can substitute back into the other equilibrium equations to find the parallel member forces. Answer A is incorrect because parallel forces don't necessarily have proportional moment arms - the moment arm depends on the perpendicular distance from your chosen moment point to each force's line of action. Answer C, while sometimes workable, isn't the most effective approach because taking moments about a point on the third member's line of action eliminates that force from the moment equation but still leaves you with two unknown parallel forces in the same equation. Answer D is unnecessarily complex - virtual work principles aren't needed when equilibrium equations can solve the problem efficiently. Remember this pattern: when you encounter parallel members in method of sections problems, immediately look for the direction perpendicular to those parallel forces to write your first equilibrium equation.

Question 10

When using the method of sections on a truss, if the force equilibrium equation in the x-direction yields the same result as the moment equilibrium equation for a particular member, what does this indicate?

  1. There is a calculation error since different equations should give different intermediate results
  2. The member is a zero-force member and can be removed from the analysis
  3. The analysis is correct, and this serves as a verification of the solution (correct answer)
  4. The equations are linearly dependent and additional information is needed
  5. The truss is statically indeterminate and cannot be solved by equilibrium alone
Explanation: When analyzing trusses using the method of sections, you cut through the truss and apply equilibrium equations to the resulting free body diagram. This typically gives you three independent equations: ∑Fx=0\sum F_x = 0, ∑Fy=0\sum F_y = 0, and ∑M=0\sum M = 0. When your force equilibrium equation in the x-direction yields the same result as your moment equilibrium equation for a particular member, this is actually excellent news—it means your analysis is mathematically consistent and correct. This agreement serves as a built-in verification of your solution, similar to how you might check arithmetic by working a problem two different ways. Option A is incorrect because getting the same result from different valid approaches indicates accuracy, not error. If you solve the same unknown using two independent equilibrium equations and get identical answers, you've verified your work. Option B misinterprets the situation—zero-force members are identified when an equilibrium equation directly shows a member carries no load, not when two equations agree on a non-zero force value. Option D wrongly suggests the equations are dependent, but force equilibrium and moment equilibrium are fundamentally independent physical principles that happen to yield consistent results when your analysis is correct. Remember this key principle: in statics problems, when independent equilibrium equations give you the same answer for an unknown, celebrate—you've got confirmation that your solution is right. This internal consistency check is one of the most reliable ways to verify your truss analysis without needing external verification.

Question 11

For the loaded truss shown in the figure, when using the method of sections to find force in member BC, if you choose to analyze the right section and take moments about point C, which forces will appear in your moment equation?

  1. Only the reaction at the right support and the applied loads on the right section
  2. Only the forces in the cut members BD and CD, since BC has zero moment arm
  3. All cut member forces plus the reaction and applied loads on the right section
  4. The reaction at the right support, applied loads on the right section, and forces in cut members BD and CD (correct answer)
  5. Only the force in member BC, since moments about C eliminate all other forces
Explanation: When taking moments about point C, the force in member BC is eliminated because its line of action passes through point C (zero moment arm). However, the forces in the other cut members (BD and CD) will have non-zero moment arms and must be included. Additionally, all external forces acting on the right section - including the reaction force and applied loads - must be included in the moment equation. Choice A omits the cut member forces. Choice B omits the external forces. Choice C incorrectly includes BC. Choice E is wrong because only BC is eliminated, not all other forces.

Question 12

For the loaded truss shown in the figure, if you want to find the force in member CD using the method of sections, which section cut would be most efficient?

  1. Cut through members AB, BH, and CD to isolate the left portion
  2. Cut through members BC, CH, and CD to isolate the left portion
  3. Cut through members CD, DI, and IG to isolate the left portion (correct answer)
  4. Cut through members DE, DI, and IH to isolate the right portion
  5. Cut through members CD, CG, and GH to isolate the left portion
Explanation: To analyze member CD efficiently, the section cut should pass through CD and two other members whose lines of action intersect at a point where we can take moments to eliminate them from the equation. Cut C through CD, DI, and IG allows taking moments about the intersection of DI and IG (or their extensions) to directly solve for CD. Choices A and B don't include enough members to properly isolate CD. Choice D cuts through the wrong members and analyzes the wrong section. Choice E creates a cut where the moment center for eliminating the other forces would be difficult to locate geometrically.

Question 13

For the truss shown in the figure, if the method of sections is used with a cut through members DE, EH, and HG, and you want to find the force in member EH by taking moments, which moment center would directly eliminate both other unknown forces?

  1. Point D, because it lies on member DE
  2. Point G, because it lies on member HG
  3. Point E, because it's the connection point for member EH
  4. The intersection point of the lines of action of members DE and HG
Explanation: D

Question 14

In the loaded truss shown in the figure, when using the method of sections to analyze member FG, why might taking moments about point F be less advantageous than other moment centers?

  1. Point F is too close to the member of interest, creating numerical instability
  2. The moment arm for member FG about point F is zero, eliminating FG from the equation
  3. Point F is not in equilibrium, violating the assumptions of the method
  4. The reaction forces cannot be included in moment calculations about point F
Explanation: B

Question 15

For the truss shown in the figure, using method of sections with a cut through members EF, FJ, and JI to find the force in member FJ, what is the most efficient moment center?

  1. Point E, to eliminate the force in member EF from the calculation
  2. Point F, to eliminate the force in member FJ and solve for the others first
  3. Point J, to eliminate the force in member JI from the calculation
  4. The intersection of the lines of action of members EF and JI
Explanation: D

Question 16

A Pratt truss has a span of 24 m with 6 equal panels. When using method of sections to find the force in the middle diagonal member, you make a cut that passes through three members. The cut section experiences a net downward load of 120 kN to the left of the cut. If you take moments about the intersection of the top and bottom chords at the cut location, which statement best describes the resulting moment equation?

  1. The diagonal force will not appear in the moment equation since it passes through the moment center
  2. Only the diagonal member force will appear in the equation with a moment arm equal to the truss depth (correct answer)
  3. The diagonal force will have the largest moment arm among the three cut members
  4. All three member forces will have equal moment arms about the chosen center
Explanation: When taking moments about the intersection point of the top and bottom chords, both the top chord force and bottom chord force pass through this point and have zero moment arms. Only the diagonal member creates a moment about this point, with its moment arm being the perpendicular distance from the line of action to the moment center (approximately equal to the truss depth). This is a key advantage of strategic moment center selection in method of sections. Choice A incorrectly suggests the diagonal passes through the center. Choices C and D incorrectly assume multiple forces contribute to the moment equation.

Question 17

A symmetrical truss with a central vertical load experiences identical member forces on both sides due to symmetry. If method of sections is used to cut through the three central members, and the vertical equilibrium equation for one half yields Fvertical=25F_{vertical} = 25 kN upward, what can be concluded about the force in the central vertical member?

  1. The central member carries 50 kN tension since both halves contribute equally to the total load transfer
  2. The central member carries 25 kN tension as determined directly from the equilibrium equation (correct answer)
  3. The central member carries 50 kN compression since it must support the loads from both sides
  4. The central member force cannot be determined without analyzing the complete truss system
Explanation: When using method of sections, the equilibrium equation directly gives the force in the cut member for the isolated section being analyzed. The 25 kN upward force in the vertical member represents the actual member force, not a contribution from one half. Symmetry confirms this value is correct, but doesn't require doubling it. Choice A incorrectly doubles the force due to misunderstanding how method of sections works. Choice C has the wrong magnitude and incorrectly assumes compression. Choice D is incorrect because method of sections is specifically designed to find individual member forces without analyzing the complete system.

Question 18

A compound truss consists of two simple trusses connected by three members. When applying method of sections to find forces in the connecting members, you make a cut that separates the two simple trusses. If the left simple truss has a net upward reaction of 150 kN and net downward loads totaling 200 kN, what is the total vertical component of forces transmitted through the connecting members?

  1. 150 kN upward to balance the reaction force in the left truss section
  2. 50 kN downward from left truss to right truss through the connecting members
  3. 350 kN total vertical force distributed among the three connecting members
  4. 50 kN upward from left truss to right truss through the connecting members (correct answer)
Explanation: When analyzing compound trusses using the method of sections, you're essentially applying equilibrium principles to isolated sections of the structure. The key insight is that when you cut through connecting members, the forces in those members must maintain equilibrium for each separated section. For the left truss section, you can apply vertical force equilibrium: ∑Fy=0\sum F_y = 0. The upward reaction force is 150 kN, the downward applied loads total 200 kN, so the connecting members must provide the remaining upward force to achieve equilibrium: 150+Fconnecting−200=0150 + F_{connecting} - 200 = 0, which gives Fconnecting=50 kN upwardF_{connecting} = 50 \text{ kN upward}. This means the connecting members transmit 50 kN upward from the left truss to the right truss. Answer A incorrectly suggests the connecting members must balance the entire reaction force of 150 kN, ignoring that the applied loads on the left section already consume most of this reaction. Answer B has the correct magnitude but wrong direction – it claims the force goes downward from left to right, which would violate equilibrium since the left section needs additional upward support. Answer C incorrectly adds the reaction and load forces (150 + 200 = 350 kN), misunderstanding that equilibrium requires balancing forces, not summing all forces present. Remember: when using method of sections on compound trusses, always check equilibrium of your cut section first. The connecting member forces are whatever's needed to satisfy ∑F=0\sum F = 0 for that isolated section.

Question 19

When using method of sections on a truss with inclined members, the force in diagonal member CD is found to be 45 kN. If this diagonal makes a 37° angle with the horizontal and you need the horizontal component of this force for overall equilibrium, which calculation gives the correct horizontal component?

  1. 45tan⁡(37°)=45(0.75)=33.7545 \tan(37°) = 45(0.75) = 33.75 kN in the direction of the member's horizontal projection
  2. 45sin⁡(37°)=45(0.6)=2745 \sin(37°) = 45(0.6) = 27 kN in the direction of the member's horizontal projection
  3. 45cos⁡(37°)=45(0.8)=3645 \cos(37°) = 45(0.8) = 36 kN in the direction of the member's horizontal projection (correct answer)
  4. 45cos⁡(37°)=450.8=56.25\frac{45}{\cos(37°)} = \frac{45}{0.8} = 56.25 kN in the direction of the member's horizontal projection
Explanation: When you're analyzing forces in truss members using the method of sections, you'll often need to resolve diagonal member forces into horizontal and vertical components for equilibrium equations. This requires understanding how force components relate to the geometry of the member. The diagonal member CD has a force of 45 kN acting along its length at 37° to the horizontal. To find the horizontal component, you need to project this force onto the horizontal axis. This is a classic application of trigonometry where the member force is the hypotenuse of a right triangle, and you want the adjacent side (horizontal component). Using basic trigonometry: horizontal component = hypotenuse × cos(angle) = 45cos⁡(37°)=45(0.8)=3645 \cos(37°) = 45(0.8) = 36 kN. This makes choice C correct. Looking at the wrong answers: Choice A uses tangent, which gives the ratio of opposite to adjacent sides but doesn't directly give you a force component. Choice B uses sine, which would give you the vertical component (opposite side) rather than the horizontal component you need. Choice D divides by cosine instead of multiplying, which would actually give you a force larger than the original member force—physically impossible since components must be smaller than the resultant. Study tip: Remember "CAH" from SOH-CAH-TOA: Cosine gives you the Adjacent side (horizontal component) when you know the Hypotenuse (member force). For any inclined force, horizontal component = force × cos(angle), vertical component = force × sin(angle).

Question 20

A determinate truss analysis using method of sections reveals that when you cut through members PQ, QR, and RS, the moment equation about point Q yields ∑MQ=0:−300(4)+FRS(6)=0\sum M_Q = 0: -300(4) + F_{RS}(6) = 0. However, when checking this result using a moment equation about point R, you get ∑MR=0:−300(2)+FPQ(6)+200(3)=0\sum M_R = 0: -300(2) + F_{PQ}(6) + 200(3) = 0. What is the force in member QR?

  1. QR = 50 kN, found by applying horizontal force equilibrium to the cut section
  2. QR = 100 kN, calculated by taking moments about the intersection of PQ and RS
  3. QR is a zero-force member since it doesn't appear in either moment equation (correct answer)
  4. QR cannot be determined from the given information without additional equilibrium equations
Explanation: When analyzing trusses using the method of sections, you create a cut through multiple members and apply equilibrium equations to find unknown forces. The key insight here is recognizing what it means when a member doesn't appear in your equilibrium equations. Looking at the two moment equations provided, notice that member QR doesn't appear in either one. When you take moments about point Q, only the external force and member RS create moments about that point - QR doesn't because it passes through Q (creating zero moment arm). Similarly, when taking moments about point R, QR doesn't appear because it passes through R. This is actually the telltale sign of a zero-force member. Option C is correct because QR is indeed a zero-force member. In the method of sections, when a member doesn't appear in any of your equilibrium equations due to geometric constraints (like passing through moment centers), it carries no internal force. Option A is wrong because while horizontal equilibrium could be applied, QR isn't necessarily horizontal, and the force wouldn't be 50 kN. Option B incorrectly suggests taking moments about an intersection point that may not even exist or be relevant to finding QR. Option D is incorrect because you actually have sufficient information - the absence of QR from both moment equations tells you everything you need to know about its force. Study tip: In method of sections problems, if a member consistently doesn't appear in your equilibrium equations due to geometric reasons (not algebraic cancellation), it's likely a zero-force member. This is a powerful shortcut for truss analysis.