Statics and Dynamics Quiz: Area Moments Of Inertia

12 questions · exam conditions

0:00

Area Moments Of InertiaQuestion 1 of 12

An isosceles triangle has a base $b$ and height $h$ , with the base lying along the bottom. The centroid of a triangle lies at $h/3$ above the base. The area moment of inertia about the base of the triangle is $bh^3/12$ . A student needs the moment of inertia about the centroidal axis parallel to the base. Which expression is correct, and what is the most common error that leads to the most tempting wrong answer?

I_{\bar{x}} = \frac{bh^3}{36}

, obtained by applying the parallel-axis theorem in reverse:

I_{\bar{x}} = I_{\text{base}} - A d^2 = \frac{bh^3}{12} - \frac{bh}{2}\left(\frac{h}{3}\right)^2

, yielding

\frac{bh^3}{12} - \frac{bh^3}{18} = \frac{bh^3}{36}

I_{\bar{x}} = \frac{bh^3}{48}

, obtained by applying the parallel-axis theorem in reverse:

I_{\bar{x}} = I_{\text{base}} - A d^2 = \frac{bh^3}{12} - \frac{bh}{2}\left(\frac{h}{4}\right)^2

, using the incorrect centroid location of

h/4

I_{\bar{x}} = \frac{bh^3}{12}

, because the parallel-axis theorem only applies when transferring away from the centroid, not toward it, so no correction is needed when the base is the reference axis.

I_{\bar{x}} = \frac{bh^3}{24}

, obtained by applying the parallel-axis theorem in reverse:

I_{\bar{x}} = I_{\text{base}} - A d^2 = \frac{bh^3}{12} - \frac{bh}{2}\left(\frac{h}{3}\right)^2

, but incorrectly using the full area

bh

instead of

bh/2

← Back to quizzes

Statics and Dynamics Quiz

Statics and Dynamics Quiz: Area Moments Of Inertia

Practice Area Moments Of Inertia in Statics and Dynamics with focused quiz questions that help you check what you know, review explanations, and build confidence with test-style prompts.

What this quiz covers

This quiz focuses on Area Moments Of Inertia, giving you a quick way to practice the rules, question types, and explanations that matter most for Statics and Dynamics.

How to use this quiz

Try each quiz question before looking at the correct answer. Use the explanations to review missed ideas, then come back to similar questions until the pattern feels familiar.

All questions

Question 1

$I_{\bar{x}} = \frac{bh^3}{36}$ , obtained by applying the parallel-axis theorem in reverse: $I_{\bar{x}} = I_{\text{base}} - A d^2 = \frac{bh^3}{12} - \frac{bh}{2}\left(\frac{h}{3}\right)^2$ , yielding $\frac{bh^3}{12} - \frac{bh^3}{18} = \frac{bh^3}{36}$ . (correct answer)
$I_{\bar{x}} = \frac{bh^3}{48}$ , obtained by applying the parallel-axis theorem in reverse: $I_{\bar{x}} = I_{\text{base}} - A d^2 = \frac{bh^3}{12} - \frac{bh}{2}\left(\frac{h}{4}\right)^2$ , using the incorrect centroid location of $h/4$ .
$I_{\bar{x}} = \frac{bh^3}{12}$ , because the parallel-axis theorem only applies when transferring away from the centroid, not toward it, so no correction is needed when the base is the reference axis.
$I_{\bar{x}} = \frac{bh^3}{24}$ , obtained by applying the parallel-axis theorem in reverse: $I_{\bar{x}} = I_{\text{base}} - A d^2 = \frac{bh^3}{12} - \frac{bh}{2}\left(\frac{h}{3}\right)^2$ , but incorrectly using the full area $bh$ instead of $bh/2$ .

Explanation: Whenever you encounter a moment of inertia problem involving a non-centroidal axis, your instinct should be to reach for the parallel-axis theorem:

I = I_{\bar{x}} + Ad^2

, where

d

is the distance between the centroidal axis and the reference axis. This theorem is reversible — if you already know

I

about some axis, you can solve backward to find

I_{\bar{x}}

. Here, the base moment of inertia is given as

bh^3/12

, and the centroid sits

h/3

above the base. The area of the triangle is

A = bh/2

. Rearranging the parallel-axis theorem:

I_{\bar{x}} = I_{\text{base}} - Ad^2 = \frac{bh^3}{12} - \frac{bh}{2}\left(\frac{h}{3}\right)^2 = \frac{bh^3}{12} - \frac{bh^3}{18} = \frac{bh^3}{36}

. That confirms A is correct. B is the most tempting wrong answer — it uses the correct procedure but plugs in

h/4

as the centroid height. Students who confuse the triangle's centroid (

h/3

from the base) with some other fraction make this error. Remember: the centroid of any triangle is always

h/3

from the base. C reflects a fundamental misunderstanding of the parallel-axis theorem. The theorem applies in both directions — you can transfer toward or away from the centroid. The centroidal moment of inertia is always the minimum, so

I_{\bar{x}} = I_{\text{base}}

would be wrong. D uses the correct centroid location and correct formula structure, but substitutes the full rectangular area

bh

instead of the triangle's area

bh/2

— a classic geometry slip. Study tip: Before applying the parallel-axis theorem, always write down three things explicitly: the correct area, the correct centroid location, and which axis you're transferring between. This prevents the majority of errors on these problems.

Question 2

A right triangle with base $b$ and height $h$ has its right angle at the origin, base along the x-axis, and vertical leg along the y-axis. Its centroid is at $(b/3, h/3)$ . The moment of inertia of this triangle about the x-axis (base) is $bh^3/12$ . A structural engineer needs the moment of inertia about the vertical centroidal axis $\bar{y}$ . The moment of inertia of the right triangle about the y-axis (vertical leg) is $b^3h/12$ . What is $I_{\bar{y}}$ ?

$I_{\bar{y}} = \frac{b^3h}{36} + \frac{bh}{2}\cdot\frac{b^2}{9} = \frac{b^3h}{36} + \frac{b^3h}{18} = \frac{b^3h}{12}$ , since the centroid is not at the y-axis and the transfer term must be added.
$I_{\bar{y}} = \frac{b^3h}{12} - \frac{bh}{2}\cdot\frac{b^2}{4} = \frac{b^3h}{12} - \frac{b^3h}{8} = -\frac{b^3h}{24}$ , indicating the formula yields a negative value and the correct answer must instead be $\frac{b^3h}{24}$ .
$I_{\bar{y}} = \frac{b^3h}{12} - \frac{bh}{2}\cdot\frac{b^2}{9} = \frac{b^3h}{12} - \frac{b^3h}{18} = \frac{b^3h}{36}$ (correct answer)
$I_{\bar{y}} = \frac{b^3h}{12} - \frac{bh}{2}\cdot\frac{b^2}{9} = \frac{b^3h}{12} - \frac{b^3h}{18} = \frac{b^3h}{36}$ , but this applies only to isosceles triangles; for a right triangle the correct formula is $\frac{b^3h}{48}$ .

Explanation: Whenever you see a question asking for a moment of inertia about a centroidal axis, your first instinct should be to reach for the Parallel Axis Theorem:

I = \bar{I} + Ad^2

. Rearranged, it lets you shift from a known axis to the centroidal axis:

\bar{I} = I - Ad^2

. The key is using the correct distance

d

between the known axis and the centroid. For this right triangle, you're given

I_y = b^3h/12

(about the y-axis, i.e., the vertical leg at the origin). The centroid sits at

\bar{x} = b/3

from that same y-axis, and the area is

A = bh/2

. Plugging in:

I_{\bar{y}} = \frac{b^3h}{12} - \frac{bh}{2} \cdot \left(\frac{b}{3}\right)^2 = \frac{b^3h}{12} - \frac{b^3h}{18} = \frac{b^3h}{36}

That confirms C is correct. A is wrong because it adds the transfer term instead of subtracting it — this would give you

I

about an axis farther from the centroid, not closer. The centroidal moment of inertia must be the minimum value, so you always subtract. B uses

d = b/2

instead of

d = b/3

, confusing the centroid location with the midpoint of the base. This produces a nonsensical negative result, which should immediately signal a wrong

d

was used. D correctly computes

b^3h/36

but then invents a false restriction claiming this formula only applies to isosceles triangles — there is no such limitation. Study tip: Always write down

d

explicitly before applying the Parallel Axis Theorem. Mixing up

b/2

and

b/3

is the single most common error on centroid-related problems.

Question 3

A solid ellipse has semi-axes $a$ (horizontal) and $b$ (vertical). Its area moment of inertia about the horizontal centroidal axis is $I_{\bar{x}} = \pi a b^3/4$ . If the horizontal semi-axis is doubled (to $2a$ ) while the vertical semi-axis remains $b$ , and the total area of the ellipse is $\pi a b$ , by what factor does $I_{\bar{x}}$ change, and what does this reveal about the relative importance of each dimension?

$I_{\bar{x}}$ increases by a factor of 4, because the area doubles when $a$ doubles, and the moment of inertia is proportional to the area times the square of the characteristic dimension, giving a factor of $2 \times 2 = 4$ .
$I_{\bar{x}}$ increases by a factor of 8, because doubling $a$ also scales the overall shape, and the moment of inertia scales with the cube of any linear dimension, so the factor is $2^3 = 8$ .
$I_{\bar{x}}$ doubles (factor of 2), because $I_{\bar{x}} = \pi (2a) b^3/4 = 2\cdot(\pi a b^3/4)$ , demonstrating that the horizontal dimension enters linearly while the vertical dimension enters cubically, making $b$ far more influential per unit change. (correct answer)
$I_{\bar{x}}$ remains unchanged, because doubling the horizontal semi-axis does not affect the distribution of area in the vertical direction, and $I_{\bar{x}}$ depends only on the vertical extent of the cross-section relative to the centroidal axis.

Explanation: When analyzing area moments of inertia, your first move should be to inspect the formula directly and identify how each variable contributes — this question is fundamentally testing whether you understand the exponent each dimension carries. For a solid ellipse,

I_{\bar{x}} = \frac{\pi a b^3}{4}

. Notice that

a

appears to the first power and

b

appears to the third power. When you double the horizontal semi-axis, replacing

a

with

2a

, the new moment of inertia becomes

I_{\bar{x}}' = \frac{\pi (2a) b^3}{4} = 2 \cdot \frac{\pi a b^3}{4}

. The result is simply double the original — a factor of 2. This confirms C is correct, and it also reveals something important:

b

is dramatically more influential than

a

. Doubling

b

would increase

I_{\bar{x}}

by a factor of

2^3 = 8

, while doubling

a

only doubles it. A is wrong because it invents a "area times characteristic dimension squared" logic that doesn't match the actual formula — the factor of 4 has no algebraic basis here. B is wrong because the "cube of any linear dimension" rule applies only when all dimensions scale together (geometric similarity); here, only

a

changes. D is wrong in its reasoning — while

I_{\bar{x}}

is primarily sensitive to vertical extent,

a

does appear in the formula and does affect the result linearly. Study tip: Always read the moment of inertia formula and note each variable's exponent before doing any reasoning. The exponent tells you the sensitivity — a cubic dependence means small changes in that dimension have enormous consequences.

Question 4

A circle and a square have equal areas. What is the ratio of the circle's centroidal $I$ to the square's?

1.00
π/3
3/π (correct answer)
3π/16

Explanation: For equal areas, πr^2 = s^2, so s^2 = πr^2. Circle centroidal I is πr^4/4 and square centroidal I is s^4/12. The ratio is (

πr^4

/4)/(

s^4

/12) = 3πr^4/s^4 = 3π/(

π^2

) = 3/π. The tempting wrong answer is π/3, which is just the reciprocal from flipping the area relation.

Question 5

A square of side $a$ has a centered square hole of side $a/2$ . Find its centroidal $I_x$ .

5a^4/64 (correct answer)
a^4/12
a^4/16
a^4/192

Explanation: For the full square, I_x = a^4/12. The centered hole has side a/2, so its own centroidal I_x is (a/2)^4/12 = a^4/192. Subtract: a^4/12 - a^4/192 = 16a^4/192 - a^4/192 = 15a^4/192 = 5a^4/64. The tempting mistake is to stop at a^4/12, forgetting to remove the hole.

Question 6

Rectangle base $b$ , height $h$ . Given $I_x=bh^3/12$ and $I_y=hb^3/12$ , if $I_x=2I_y$ , find $h/b$ .

√2 (correct answer)
2.0
1/√2
1/2

Explanation: Set b h^3 / 12 = 2(h

b^3

/ 12). Cancel b h / 12 to get h^2 = 2 b^2, so h/b = sqrt(2). The tempting trap is 1/sqrt(2), which is b/h, the reciprocal of the ratio asked for.

Question 7

For an equilateral triangle of side $a$ , find the centroidal $I$ about an axis parallel to a side.

a^4/36
√3 a^4/96 (correct answer)
√3 a^4/48
√3 a^4/32

Explanation: For side a, height is sqrt(3) a/2. Moment about that side is a h^3/12; transfer to centroid using parallel-axis theorem: subtract A(h/3)^2 = (a h/2)(

h^2

/9). This leaves a h^3/36 = sqrt(3) a^4/96. The tempting wrong answer is sqrt(3) a^4/32, the value about the side itself, because you forgot the centroidal transfer.

Question 8

Two identical rectangles, each with width $a$ and height $3a$ , are arranged to form a cross-shaped (plus-sign) cross-section: one rectangle is oriented vertically and the other horizontally, overlapping at their centers. The centroid of the composite section is at the geometric center of the cross. Assuming the overlap region (a square of side $a$ ) must not be double-counted, what is the area moment of inertia of the cross about the horizontal centroidal axis?

$I_{\bar{x}} = 2\cdot\frac{a(3a)^3}{12} - \frac{a\cdot a^3}{12} = \frac{54a^4}{12} - \frac{a^4}{12} = \frac{53a^4}{12}$ , treating both rectangles as if they are vertically oriented with height $3a$ and subtracting the overlap once.
$I_{\bar{x}} = 2\cdot\frac{a(3a)^3}{12} = \frac{54a^4}{12} = \frac{9a^4}{2}$ , treating both rectangles as vertically oriented and counting both without removing the overlap region.
$I_{\bar{x}} = \frac{a(3a)^3}{12} + \frac{(3a)\cdot a^3}{12} = \frac{27a^4}{12} + \frac{3a^4}{12} = \frac{30a^4}{12} = \frac{5a^4}{2}$ , correctly using the two different orientations but failing to subtract the doubly-counted overlap region.
$I_{\bar{x}} = \frac{a(3a)^3}{12} + \frac{(3a)\cdot a^3}{12} - \frac{a\cdot a^3}{12} = \frac{27a^4}{12} + \frac{3a^4}{12} - \frac{a^4}{12} = \frac{29a^4}{12}$ , using each rectangle's correct orientation and subtracting the overlap once. (correct answer)

Explanation: When computing the moment of inertia for a composite section, the key principle is inclusion-exclusion: add the contributions of each distinct region, but never count any area more than once. For a cross-shaped section, the two rectangles share an overlapping square of side

a

at the center, so you must subtract that square's contribution exactly once. Each rectangle contributes differently depending on its orientation relative to the horizontal centroidal axis. The vertical rectangle (width

a

, height

3a

) contributes

\frac{a(3a)^3}{12} = \frac{27a^4}{12}

. The horizontal rectangle (width

3a

, height

a

) contributes

\frac{(3a)(a)^3}{12} = \frac{3a^4}{12}

. The overlapping square (side

a

) was counted in both rectangles, so subtract it once:

\frac{a(a)^3}{12} = \frac{a^4}{12}

. This gives

\frac{27a^4}{12} + \frac{3a^4}{12} - \frac{a^4}{12} = \frac{29a^4}{12}

, confirming D is correct. Choice A incorrectly treats both rectangles as if they were vertically oriented with height

3a

, ignoring that the horizontal rectangle has only height

a

about the centroidal axis — so while it does subtract the overlap, the starting values are wrong. Choice B makes the same orientation error as A and also skips the overlap subtraction entirely, double-counting the central square. Choice C correctly identifies each rectangle's orientation, but forgets to subtract the overlapping region at all, overcounting the central square's inertia. As a study tip: always sketch the composite shape, identify every overlapping region, and explicitly ask yourself "is this area being counted twice?" before finalizing your calculation.

Question 9

A composite cross-section consists of a rectangle of width $2a$ and height $4a$ with a circle of diameter $2a$ removed from its center. Both shapes share the same centroid. The area moment of inertia of a solid circle about its centroidal axis is $\pi d^4/64$ . Which expression correctly gives the area moment of inertia of the composite section about the horizontal centroidal axis?

$I_{\bar{x}} = \frac{(2a)(4a)^3}{12} - \frac{\pi(2a)^4}{64} + (10a^2)\left(\frac{2a}{2}\right)^2 = \frac{32a^4}{3} - \frac{\pi a^4}{4} + 10a^4$ , incorrectly applying a parallel-axis correction despite both shapes sharing the same centroid.
$I_{\bar{x}} = \frac{(2a)(4a)^3}{12} - \frac{\pi(2a)^4}{32} = \frac{32a^4}{3} - \frac{\pi a^4}{2}$ , applying the semicircle formula $\pi d^4/32$ since only the upper half is subtracted.
$I_{\bar{x}} = \frac{(2a)(4a)^3}{36} - \frac{\pi(2a)^4}{64} = \frac{128a^4}{36} - \frac{\pi a^4}{4}$ , using the triangle formula $bh^3/36$ for the rectangle in error.
$I_{\bar{x}} = \frac{(2a)(4a)^3}{12} - \frac{\pi(2a)^4}{64} = \frac{128a^4}{12} - \frac{16\pi a^4}{64} = \frac{32a^4}{3} - \frac{\pi a^4}{4}$ (correct answer)

Explanation: When tackling composite cross-sections, your go-to tool is the subtraction method: compute the moment of inertia of the full shape, then subtract the removed portion. The key formula for a rectangle about its own centroidal axis is

bh^3/12

, and for a solid circle it's

\pi d^4/64

. The parallel-axis theorem (

I = I_{\bar{x}} + Ad^2

) only applies when a shape's centroid is offset from the reference axis — if both centroids coincide, no correction is needed. For this problem, the rectangle has width

2a

and height

4a

, giving

I_{rect} = \frac{(2a)(4a)^3}{12} = \frac{128a^4}{12} = \frac{32a^4}{3}

. The removed circle has diameter

2a

, so

I_{circle} = \frac{\pi(2a)^4}{64} = \frac{16\pi a^4}{64} = \frac{\pi a^4}{4}

. Since both centroids align, the composite inertia is simply

I_{\bar{x}} = \frac{32a^4}{3} - \frac{\pi a^4}{4}

, confirming D is correct. A is wrong because it tacks on a spurious parallel-axis term

Ad^2

even though no centroidal offset exists — a classic trap when students apply the parallel-axis theorem reflexively. B mistakenly uses

\pi d^4/32

, which is the formula for a semicircle, not a full circle. C uses

bh^3/36

, which applies to triangles, not rectangles — a formula mix-up that immediately disqualifies it. As a study tip: always ask yourself "are the centroids offset?" before applying the parallel-axis theorem. If the answer is no, skip it entirely — adding

Ad^2

when there's no offset is one of the most common errors on composite-section problems.

Question 10

A thin semicircular area of radius $R$ has its diameter lying along the x-axis, with the curved portion above. The centroidal distance from the diameter (x-axis) is $\bar{y} = 4R/(3\pi)$ . The area moment of inertia about the diameter (x-axis) for a full circle is $\pi R^4/4$ , so for the semicircle about its diameter it is $\pi R^4/8$ . What is the area moment of inertia of the semicircle about its own horizontal centroidal axis $\bar{x}$ ?

$I_{\bar{x}} = \frac{\pi R^4}{8} - \frac{\pi R^2}{2}\left(\frac{4R}{3\pi}\right)^2 = \frac{\pi R^4}{8} - \frac{8R^4}{9\pi}$ (correct answer)
$I_{\bar{x}} = \frac{\pi R^4}{8} + \frac{\pi R^2}{2}\left(\frac{4R}{3\pi}\right)^2 = \frac{\pi R^4}{8} + \frac{8R^4}{9\pi}$
$I_{\bar{x}} = \frac{\pi R^4}{8} - \pi R^2\left(\frac{4R}{3\pi}\right)^2 = \frac{\pi R^4}{8} - \frac{16R^4}{9\pi}$
$I_{\bar{x}} = \frac{\pi R^4}{16} - \frac{\pi R^2}{2}\left(\frac{4R}{3\pi}\right)^2 = \frac{\pi R^4}{16} - \frac{8R^4}{9\pi}$

Explanation: Whenever you encounter a moment of inertia problem involving a centroidal axis that is not the reference axis you already know, your go-to tool is the Parallel Axis Theorem:

I_{\text{ref}} = I_{\bar{x}} + A d^2

, where

d

is the distance between the two parallel axes. Critically, you must rearrange this to solve for the centroidal moment of inertia:

I_{\bar{x}} = I_{\text{ref}} - A d^2

. For the semicircle, the known reference axis is the diameter (x-axis), giving

I_{x} = \pi R^4/8

. The area is

A = \pi R^2/2

, and the centroid sits at

d = \bar{y} = 4R/(3\pi)

above the diameter. Plugging in:

I_{\bar{x}} = \frac{\pi R^4}{8} - \frac{\pi R^2}{2}\left(\frac{4R}{3\pi}\right)^2 = \frac{\pi R^4}{8} - \frac{8R^4}{9\pi}

This confirms answer A is correct. Answer B adds the transfer term instead of subtracting it — a classic sign error. Remember, the centroidal axis always yields the minimum moment of inertia; adding would make the centroidal value larger than the reference, which is physically impossible. Answer C uses the full circle area

\pi R^2

rather than the semicircle area

\pi R^2/2

, doubling the correction term incorrectly. Answer D halves the base moment of inertia to

\pi R^4/16

for no valid reason — the semicircle's moment about its own diameter is already

\pi R^4/8

, not half of that. A reliable study tip: always write the Parallel Axis Theorem as

I_{\bar{x}} = I_{\text{ref}} - Ad^2

when solving toward the centroid — subtracting is the only physically valid direction.

Question 11

A thin annular (hollow circular) cross-section has outer radius $R$ and inner radius $r$ . Its area moment of inertia about the centroidal axis is $I = \frac{\pi}{4}(R^4 - r^4)$ . For a thin-walled tube where the wall thickness $t \ll R$ (with $r = R - t$ ), which expression best approximates $I$ for small $t$ , and what is the leading-order term?

$I \approx \frac{\pi R^4}{4}\left(\frac{t}{R}\right) = \frac{\pi R^3 t}{4}$ , obtained by retaining only the first-order term in $(1-(t/R))^4 \approx 1 - t/R$ and multiplying directly by $\pi R^4/4$ , incorrectly using a first-power rather than a fourth-power expansion.
$I \approx \pi R^3 t$ , obtained by factoring $R^4 - r^4 = (R^2+r^2)(R+r)(R-r)$ and approximating $R \approx r$ for small $t$ , giving $(2R^2)(2R)(t) = 4R^3 t$ , so $I \approx \frac{\pi}{4}\cdot 4R^3 t = \pi R^3 t$ . (correct answer)
$I \approx \frac{\pi R^4}{4}\left(1 - \frac{t}{R}\right)$ , obtained by a first-order Taylor expansion of $(1-(t/R))^4 \approx 1 - t/R$ , incorrectly retaining the full outer term $\pi R^4/4$ rather than extracting the leading correction.
$I \approx 2\pi R^3 t$ , obtained by correctly computing $R^4 - r^4 \approx 4R^3 t$ but then multiplying by $\pi/2$ instead of $\pi/4$ , an error of a factor of 2 in the prefactor.

Explanation: When approximating moments of inertia for thin-walled sections, your goal is to find the leading-order behavior in the small parameter

t/R

. The key algebraic tool here is the difference-of-squares factoring applied twice. Start with

R^4 - r^4

. Factor it as

(R^2 + r^2)(R^2 - r^2) = (R^2 + r^2)(R+r)(R-r)

. Now substitute

r = R - t

and apply the thin-wall approximation

t \ll R

, meaning

r \approx R

. Each factor becomes:

R^2 + r^2 \approx 2R^2

R + r \approx 2R

, and

R - r = t

exactly. Multiplying gives

R^4 - r^4 \approx (2R^2)(2R)(t) = 4R^3 t

. Therefore

I = \frac{\pi}{4}(R^4 - r^4) \approx \frac{\pi}{4}(4R^3 t) = \pi R^3 t

, confirming B is correct. Answer A misapplies the binomial expansion — writing

(1 - t/R)^4 \approx 1 - t/R

treats the exponent as 1 instead of 4, missing the correct coefficient of 4 that comes from differentiating

x^4

x=1

. Answer C makes the same first-order Taylor error but compounds it by keeping the full

\pi R^4/4

term, producing an expression that doesn't isolate the small correction properly. Answer D gets the difference

4R^3 t

right but then multiplies by

\pi/2

instead of

\pi/4

, an arithmetic slip that doubles the result. Study tip: When expanding

(1 - \epsilon)^n

for small

\epsilon

, the leading correction is always

-n\epsilon

— never forget that coefficient

n

. In thin-wall problems, that factor of 4 (from

n=4

) is precisely what collapses the formula to

\pi R^3 t

Question 12

The area moment of inertia of a solid circle of radius $R$ about its centroidal axis is $I = \pi R^4/4$ . A quarter-circle of radius $R$ (one quadrant) has its centroid at a distance $\bar{r} = 4R/(3\pi)$ from each of the two straight edges. The moment of inertia of the quarter-circle about one straight edge (e.g., the x-axis) is $I_x = \pi R^4/16$ (one-quarter of the full circle's $\pi R^4/4$ ). What is the area moment of inertia of the quarter-circle about its horizontal centroidal axis $\bar{x}$ ?

$I_{\bar{x}} = \frac{\pi R^4}{16} - \frac{\pi R^2}{2}\left(\frac{4R}{3\pi}\right)^2 = \frac{\pi R^4}{16} - \frac{8R^4}{9\pi}$ , using the semicircle area $\pi R^2/2$ rather than the quarter-circle area.
$I_{\bar{x}} = \frac{\pi R^4}{16} - \frac{\pi R^2}{4}\left(\frac{4R}{3\pi}\right)^2 = \frac{\pi R^4}{16} - \frac{4R^4}{9\pi}$ (correct answer)
$I_{\bar{x}} = \frac{\pi R^4}{8} - \frac{\pi R^2}{4}\left(\frac{4R}{3\pi}\right)^2 = \frac{\pi R^4}{8} - \frac{4R^4}{9\pi}$ , using $\pi R^4/8$ as the moment of inertia of a quarter-circle about its straight edge.
$I_{\bar{x}} = \frac{\pi R^4}{16} + \frac{\pi R^2}{4}\left(\frac{4R}{3\pi}\right)^2 = \frac{\pi R^4}{16} + \frac{4R^4}{9\pi}$ , adding the transfer term because the centroidal axis is inside the reference axis and the formula requires addition.

Explanation: Whenever you see a problem asking for a moment of inertia about a centroidal axis, your instinct should be to reach for the parallel axis theorem:

I_{\text{ref}} = I_{\bar{x}} + A d^2

, where

d

is the distance between the reference axis and the centroidal axis. Rearranged, this gives

I_{\bar{x}} = I_{\text{ref}} - A d^2

. You always subtract the transfer term when moving from an outer reference axis inward to the centroid. For a quarter-circle of radius

R

, the area is

A = \pi R^2/4

, the centroid lies at

\bar{r} = 4R/(3\pi)

from each straight edge, and the moment of inertia about the straight edge (x-axis) is

I_x = \pi R^4/16

. Plugging into the rearranged parallel axis theorem:

I_{\bar{x}} = \frac{\pi R^4}{16} - \frac{\pi R^2}{4}\left(\frac{4R}{3\pi}\right)^2 = \frac{\pi R^4}{16} - \frac{4R^4}{9\pi}

This is exactly answer B. Answer A uses the semicircle area

\pi R^2/2

instead of the quarter-circle area

\pi R^2/4

— a careless substitution that doubles the transfer term. Answer C uses

\pi R^4/8

I_x

, which is incorrect; that value belongs to a semicircle, not a quarter-circle. Answer D adds the transfer term instead of subtracting it — a fundamental misapplication of the parallel axis theorem. Moving from a boundary axis inward to the centroid always means you subtract, because the centroidal moment of inertia is always the minimum for any parallel axis. Study tip: Memorize this check —

I_{\bar{x}}

must always be less than

I_x

for any axis displaced from the centroid. If your answer is larger after applying the parallel axis theorem, you've added when you should have subtracted.