Help with Other Carbonyl Reactions - Organic Chemistry

As the first step in a substitution reaction involves a nucleophilic attack at an electrophilic carbonyl carbon, we must consider the varying reactivity of the electrophilic carbonyl center. Resonance diagrams, as well as an understanding of electronegativity, will help us understand the degree to which this effect is observed in a substrate.

Resonance diagrams for all four substrates show how electrons contained in the leaving group's heteroatom may be shared throughout the carbonyl system, effectively placing a partial negative charge on the electrophilic carbon. To determine which is the most electrophilic, we must identify the resonance diagram below that contributes the least to the overall molecule. This molecule will be least stable and most reactive.

Note: Remember, resonance diagrams show possible electron distributions, and a molecule exists as a weighted average of these possibilities, favoring the more stable ones.

Compound II is the most electrophilic substrate, as the lone pair on the central oxygen molecule must be shared between two carbonyls. The resonance forms below each contribute very little to the overall molecule. This is not the case in any other pictured substrate.

Now compare compounds I and III. Resonance for these molecules is essentially identical, with a nitrogen atom in compound I and an oxygen atom in compound III. We may conclude that the resonance form of compound III contributes less to the true existence of the molecule, as oxygen is more electronegative. The sharing of electrons will be less favorable in the resonance form of compound III than the resonance form of compound I.

For compound IV, both resonance structures are equally stable, and the molecule will exist as an average of both structures, placing a fair amount of electron density at the carbonyl carbon, drastically reducing the electrophilicity of the central carbon.

If this above explanation is confusing to you, you may also compare how good the leaving groups are. Acetate, the leaving group of compound II, is a stable ion and will readily leave in a substitution reaction. Methoxide is the next best leaving group, from compound III, followed by the negatively charged ethanamine leaving group from compound I. As will be a terrible leaving group, a substitution reaction with carboxylate substrates, such as compound IV, will never occur.

The compounds, in order of reactivity, are II > III > I > IV.

Alkenes are saturated by hydrogen gas in the presence of a palladium catalyst. This type of reaction is termed catalytic hydrogenation and results in syn addition of hydrogen across a double bond. Molecules II, III, and IV have all undergone oxidation-reduction reactions and do not result from the given conditions. Molecule I is altered only by hydrogenation of the 2-3 double bond and is the correct answer.

After the initial protonation of the carbonyl-oxygen, nucleophilic attack by water occurs at the carbonyl-carbon, resulting in the positively-charged carbonyl oxygen accepting electrons from the carbonyl double bond, yielding an intermediate in which the only charge is found on the attacking water molecule (intermediate III). A proton is then quickly transferred to the chlorine, which dissociates as the carbonyl is reformed. Removal of the hydrogen bound to the carbonyl oxygen by another water molecule terminates the reaction. The reaction is favorable since carboxylic acids and carboxylates are less energetic than acid halides.

As the reagents show, this is a two step reaction.

First, we use MCPBA, a common reagent used to make epoxide. Next, we introduce the methanol, which performs a nucleophilic attack on the epoxide. However, because the reaction is taking place in base, the methanol attacks the less substituted side of the epoxide. The methanol performs a nucleophilic backside attack, and so the stereochemistry becomes inverted. Work up is assumed throughout the reaction.

This is a addition to an alpha/beta-unsaturated ketone. Only strongly nucleophilic reagents add . In this case, both the Grignard and organolithium reagents are strong enough to add , while the Gilman reagent will add .

The statement "The catalyzed ring opening of an epoxide in aqueous acid will yield a cis glycol" is incorrect. These reaction conditions will yield a trans glycol. In fact, regardless of conditions, the opening of an epoxide will always yield a trans glycol (the two alcohol groups are on opposite sides).

As the first step in a substitution reaction involves a nucleophilic attack at an electrophilic carbonyl carbon, we must consider the varying reactivity of the electrophilic carbonyl center. Resonance diagrams, as well as an understanding of electronegativity, will help us understand the degree to which this effect is observed in a substrate.

Resonance diagrams for all four substrates show how electrons contained in the leaving group's heteroatom may be shared throughout the carbonyl system, effectively placing a partial negative charge on the electrophilic carbon. To determine which is the most electrophilic, we must identify the resonance diagram below that contributes the least to the overall molecule. This molecule will be least stable and most reactive.

Note: Remember, resonance diagrams show possible electron distributions, and a molecule exists as a weighted average of these possibilities, favoring the more stable ones.

Compound II is the most electrophilic substrate, as the lone pair on the central oxygen molecule must be shared between two carbonyls. The resonance forms below each contribute very little to the overall molecule. This is not the case in any other pictured substrate.

Now compare compounds I and III. Resonance for these molecules is essentially identical, with a nitrogen atom in compound I and an oxygen atom in compound III. We may conclude that the resonance form of compound III contributes less to the true existence of the molecule, as oxygen is more electronegative. The sharing of electrons will be less favorable in the resonance form of compound III than the resonance form of compound I.

For compound IV, both resonance structures are equally stable, and the molecule will exist as an average of both structures, placing a fair amount of electron density at the carbonyl carbon, drastically reducing the electrophilicity of the central carbon.

If this above explanation is confusing to you, you may also compare how good the leaving groups are. Acetate, the leaving group of compound II, is a stable ion and will readily leave in a substitution reaction. Methoxide is the next best leaving group, from compound III, followed by the negatively charged ethanamine leaving group from compound I. As will be a terrible leaving group, a substitution reaction with carboxylate substrates, such as compound IV, will never occur.

The compounds, in order of reactivity, are II > III > I > IV.

Alkenes are saturated by hydrogen gas in the presence of a palladium catalyst. This type of reaction is termed catalytic hydrogenation and results in syn addition of hydrogen across a double bond. Molecules II, III, and IV have all undergone oxidation-reduction reactions and do not result from the given conditions. Molecule I is altered only by hydrogenation of the 2-3 double bond and is the correct answer.

After the initial protonation of the carbonyl-oxygen, nucleophilic attack by water occurs at the carbonyl-carbon, resulting in the positively-charged carbonyl oxygen accepting electrons from the carbonyl double bond, yielding an intermediate in which the only charge is found on the attacking water molecule (intermediate III). A proton is then quickly transferred to the chlorine, which dissociates as the carbonyl is reformed. Removal of the hydrogen bound to the carbonyl oxygen by another water molecule terminates the reaction. The reaction is favorable since carboxylic acids and carboxylates are less energetic than acid halides.

As the reagents show, this is a two step reaction.

First, we use MCPBA, a common reagent used to make epoxide. Next, we introduce the methanol, which performs a nucleophilic attack on the epoxide. However, because the reaction is taking place in base, the methanol attacks the less substituted side of the epoxide. The methanol performs a nucleophilic backside attack, and so the stereochemistry becomes inverted. Work up is assumed throughout the reaction.

This is a addition to an alpha/beta-unsaturated ketone. Only strongly nucleophilic reagents add . In this case, both the Grignard and organolithium reagents are strong enough to add , while the Gilman reagent will add .

The statement "The catalyzed ring opening of an epoxide in aqueous acid will yield a cis glycol" is incorrect. These reaction conditions will yield a trans glycol. In fact, regardless of conditions, the opening of an epoxide will always yield a trans glycol (the two alcohol groups are on opposite sides).

As the first step in a substitution reaction involves a nucleophilic attack at an electrophilic carbonyl carbon, we must consider the varying reactivity of the electrophilic carbonyl center. Resonance diagrams, as well as an understanding of electronegativity, will help us understand the degree to which this effect is observed in a substrate.

Resonance diagrams for all four substrates show how electrons contained in the leaving group's heteroatom may be shared throughout the carbonyl system, effectively placing a partial negative charge on the electrophilic carbon. To determine which is the most electrophilic, we must identify the resonance diagram below that contributes the least to the overall molecule. This molecule will be least stable and most reactive.

Note: Remember, resonance diagrams show possible electron distributions, and a molecule exists as a weighted average of these possibilities, favoring the more stable ones.

Compound II is the most electrophilic substrate, as the lone pair on the central oxygen molecule must be shared between two carbonyls. The resonance forms below each contribute very little to the overall molecule. This is not the case in any other pictured substrate.

Now compare compounds I and III. Resonance for these molecules is essentially identical, with a nitrogen atom in compound I and an oxygen atom in compound III. We may conclude that the resonance form of compound III contributes less to the true existence of the molecule, as oxygen is more electronegative. The sharing of electrons will be less favorable in the resonance form of compound III than the resonance form of compound I.

For compound IV, both resonance structures are equally stable, and the molecule will exist as an average of both structures, placing a fair amount of electron density at the carbonyl carbon, drastically reducing the electrophilicity of the central carbon.

If this above explanation is confusing to you, you may also compare how good the leaving groups are. Acetate, the leaving group of compound II, is a stable ion and will readily leave in a substitution reaction. Methoxide is the next best leaving group, from compound III, followed by the negatively charged ethanamine leaving group from compound I. As will be a terrible leaving group, a substitution reaction with carboxylate substrates, such as compound IV, will never occur.

The compounds, in order of reactivity, are II > III > I > IV.

Alkenes are saturated by hydrogen gas in the presence of a palladium catalyst. This type of reaction is termed catalytic hydrogenation and results in syn addition of hydrogen across a double bond. Molecules II, III, and IV have all undergone oxidation-reduction reactions and do not result from the given conditions. Molecule I is altered only by hydrogenation of the 2-3 double bond and is the correct answer.

After the initial protonation of the carbonyl-oxygen, nucleophilic attack by water occurs at the carbonyl-carbon, resulting in the positively-charged carbonyl oxygen accepting electrons from the carbonyl double bond, yielding an intermediate in which the only charge is found on the attacking water molecule (intermediate III). A proton is then quickly transferred to the chlorine, which dissociates as the carbonyl is reformed. Removal of the hydrogen bound to the carbonyl oxygen by another water molecule terminates the reaction. The reaction is favorable since carboxylic acids and carboxylates are less energetic than acid halides.

As the reagents show, this is a two step reaction.

First, we use MCPBA, a common reagent used to make epoxide. Next, we introduce the methanol, which performs a nucleophilic attack on the epoxide. However, because the reaction is taking place in base, the methanol attacks the less substituted side of the epoxide. The methanol performs a nucleophilic backside attack, and so the stereochemistry becomes inverted. Work up is assumed throughout the reaction.

This is a addition to an alpha/beta-unsaturated ketone. Only strongly nucleophilic reagents add . In this case, both the Grignard and organolithium reagents are strong enough to add , while the Gilman reagent will add .

The statement "The catalyzed ring opening of an epoxide in aqueous acid will yield a cis glycol" is incorrect. These reaction conditions will yield a trans glycol. In fact, regardless of conditions, the opening of an epoxide will always yield a trans glycol (the two alcohol groups are on opposite sides).

As the first step in a substitution reaction involves a nucleophilic attack at an electrophilic carbonyl carbon, we must consider the varying reactivity of the electrophilic carbonyl center. Resonance diagrams, as well as an understanding of electronegativity, will help us understand the degree to which this effect is observed in a substrate.

Resonance diagrams for all four substrates show how electrons contained in the leaving group's heteroatom may be shared throughout the carbonyl system, effectively placing a partial negative charge on the electrophilic carbon. To determine which is the most electrophilic, we must identify the resonance diagram below that contributes the least to the overall molecule. This molecule will be least stable and most reactive.

Note: Remember, resonance diagrams show possible electron distributions, and a molecule exists as a weighted average of these possibilities, favoring the more stable ones.

Compound II is the most electrophilic substrate, as the lone pair on the central oxygen molecule must be shared between two carbonyls. The resonance forms below each contribute very little to the overall molecule. This is not the case in any other pictured substrate.

Now compare compounds I and III. Resonance for these molecules is essentially identical, with a nitrogen atom in compound I and an oxygen atom in compound III. We may conclude that the resonance form of compound III contributes less to the true existence of the molecule, as oxygen is more electronegative. The sharing of electrons will be less favorable in the resonance form of compound III than the resonance form of compound I.

For compound IV, both resonance structures are equally stable, and the molecule will exist as an average of both structures, placing a fair amount of electron density at the carbonyl carbon, drastically reducing the electrophilicity of the central carbon.

If this above explanation is confusing to you, you may also compare how good the leaving groups are. Acetate, the leaving group of compound II, is a stable ion and will readily leave in a substitution reaction. Methoxide is the next best leaving group, from compound III, followed by the negatively charged ethanamine leaving group from compound I. As will be a terrible leaving group, a substitution reaction with carboxylate substrates, such as compound IV, will never occur.

The compounds, in order of reactivity, are II > III > I > IV.