Organic Chemistry 2 Quiz: Transesterification
19 questions · exam conditions
0:00
TransesterificationQuestion 1 of 19

Ethyl acetate is subjected to acid-catalyzed transesterification using methanol that is isotopically labeled with oxygen-18 (CH₃¹⁸OH). After the reaction reaches equilibrium, where is the ¹⁸O label located in the product, methyl acetate?

Exclusively in the carbonyl oxygen of the methyl acetate (C=¹⁸O).
Exclusively in the ether linkage oxygen of the methyl acetate (-¹⁸OCH₃).
Equally distributed between the carbonyl oxygen and the ether linkage oxygen.
The label is transferred to the ethanol byproduct, not the methyl acetate product.
← Back to quizzes

Organic Chemistry 2 Quiz

Organic Chemistry 2 Quiz: Transesterification

Practice Transesterification in Organic Chemistry 2 with focused quiz questions that help you check what you know, review explanations, and build confidence with test-style prompts.

What this quiz covers

This quiz focuses on Transesterification, giving you a quick way to practice the rules, question types, and explanations that matter most for Organic Chemistry 2.

How to use this quiz

Try each quiz question before looking at the correct answer. Use the explanations to review missed ideas, then come back to similar questions until the pattern feels familiar.

All questions

Question 1

Ethyl acetate is subjected to acid-catalyzed transesterification using methanol that is isotopically labeled with oxygen-18 (CH₃¹⁸OH). After the reaction reaches equilibrium, where is the ¹⁸O label located in the product, methyl acetate?

  1. Exclusively in the carbonyl oxygen of the methyl acetate (C=¹⁸O).
  2. Exclusively in the ether linkage oxygen of the methyl acetate (-¹⁸OCH₃). (correct answer)
  3. Equally distributed between the carbonyl oxygen and the ether linkage oxygen.
  4. The label is transferred to the ethanol byproduct, not the methyl acetate product.
Explanation: The mechanism of acid-catalyzed transesterification involves nucleophilic attack by the alcohol (CH₃¹⁸OH) on the protonated carbonyl carbon of the ester. The original carbonyl oxygen is retained. The attacking alcohol's oxygen, which is ¹⁸O labeled, becomes the new ether oxygen in the product ester. The original ethoxy group leaves as ethanol.

Question 2

Consider the acid-catalyzed transesterification of methyl pivalate (methyl 2,2-dimethylpropanoate) with ethanol versus the transesterification of methyl acetate with ethanol, both under identical conditions. How would the rates of these two reactions compare?

  1. Methyl pivalate reacts faster due to the inductive effect of the tert-butyl group.
  2. Methyl acetate reacts faster because its carbonyl carbon is less sterically hindered. (correct answer)
  3. Methyl pivalate reacts faster because the bulky tert-butyl group promotes departure of the leaving group.
  4. Both reactions proceed at nearly identical rates because the attacking nucleophile is the same.
Explanation: The rate of nucleophilic acyl substitution is highly sensitive to steric hindrance around the carbonyl carbon. Methyl pivalate has a bulky tert-butyl group attached to the carbonyl, which sterically hinders the approach of the ethanol nucleophile. Methyl acetate has a much smaller methyl group, allowing for faster nucleophilic attack. Therefore, the reaction with methyl acetate is significantly faster.

Question 3

An equimolar mixture of ethyl acetate and methanol is combined with an acid catalyst and allowed to reach equilibrium with methyl acetate and ethanol. The equilibrium constant, Keq, for this reaction is approximately 1. Which factor is the primary reason for this observation? $$ \text{Ethyl Acetate} + \text{Methanol} \rightleftharpoons \text{Methyl Acetate} + \text{Ethanol}

  1. The starting ester and product ester have nearly identical thermodynamic stabilities. (correct answer)
  2. The rate of the forward reaction is exactly equal to the rate of the reverse reaction under all conditions.
  3. Methanol and ethanol have identical pKa values, making the alkoxide leaving groups equally stable.
  4. The reaction is entropy-driven, and since there are two moles on each side, ΔS is approximately zero.
Explanation: The equilibrium constant (Keq) is determined by the change in Gibbs free energy (ΔG°) between reactants and products. In this specific transesterification, the bonds being broken and formed are very similar. The starting materials (ethyl acetate, methanol) and products (methyl acetate, ethanol) have very similar overall thermodynamic stabilities. Therefore, ΔG° is close to zero, and Keq = exp(-ΔG°/RT) is close to 1.

Question 4

A chemist needs to convert a high-boiling point ester into a more volatile methyl ester. The starting molecule also contains a ketone functional group. Which set of conditions is most appropriate for performing this transesterification with high chemoselectivity?

  1. LiAlH₄ in THF, followed by acidic workup and reaction with CH₃OH.
  2. NaOCH₃ (catalytic) in a large excess of CH₃OH. (correct answer)
  3. CH₃MgBr in ether, followed by acidic workup.
    1. NaOH (aq), heat; 2. H₃O⁺; 3. SOCl₂; 4. CH₃OH
Explanation: The goal is a selective transesterification. Standard base-catalyzed conditions (NaOCH₃ in CH₃OH) are ideal because the alkoxide is a soft nucleophile that will selectively react with the ester over the ketone. LiAlH₄ (A) would reduce both the ester and the ketone. CH₃MgBr (C) would attack both carbonyls. The sequence in (D) would hydrolyze the ester, but the subsequent steps to form an acid chloride would also be complicated by the ketone, which can be enolized or attacked. Option B is the most direct and chemoselective method.

Question 5

The hydrolysis of an ester using a large excess of water and an acid catalyst is mechanistically the reverse of Fischer esterification. How can this hydrolysis reaction be best described in the context of related transformations?

  1. As an irreversible saponification reaction.
  2. As a transesterification reaction where water acts as the alcohol. (correct answer)
  3. As an E2 elimination reaction catalyzed by acid.
  4. As a redox reaction where the ester is oxidized by water.
Explanation: Transesterification is the conversion of one ester to another by reacting with an alcohol. The mechanism involves nucleophilic attack of the alcohol on the ester carbonyl. Acid-catalyzed hydrolysis follows the exact same mechanistic pathway, but the nucleophile is water instead of an alcohol. Therefore, it can be conceptually framed as a transesterification where the 'new' alkoxy group is an -OH group, and the product is a carboxylic acid instead of a new ester.

Question 6

Consider a compound that contains both a phenyl ester group and a tert-butyl ester group. If this compound is treated with one equivalent of sodium methoxide in methanol, which ester group is more likely to undergo transesterification?

  1. The tert-butyl ester, because the tert-butoxide anion is a very unstable, high-energy leaving group.
  2. The phenyl ester, because the phenoxide anion is a relatively stable, weak base and thus a good leaving group. (correct answer)
  3. The tert-butyl ester, because the bulky tert-butyl group creates strain that is relieved upon substitution.
  4. Both esters will react at similar rates because the attacking nucleophile is the same for both.
Explanation: In nucleophilic acyl substitution, the rate is influenced by the stability of the leaving group. A better leaving group is the conjugate base of a stronger acid. Phenol (pKa ≈ 10) is much more acidic than tert-butanol (pKa ≈ 18). Therefore, the phenoxide anion is a much more stable base than the tert-butoxide anion, making it a significantly better leaving group. The reaction will preferentially occur at the phenyl ester site.

Question 7

To convert dimethyl terephthalate (a solid ester) into bis(2-hydroxyethyl) terephthalate (a precursor to PET plastic), the reaction is run with a large excess of ethylene glycol and a catalyst at high temperature. The reaction produces methanol as a byproduct. How is the equilibrium for this reaction typically driven toward the products in an industrial setting?

  1. By continuously removing the methanol byproduct from the reaction mixture via distillation. (correct answer)
  2. By adding a dehydrating agent to remove any water that forms as a side product.
  3. By using a phase-transfer catalyst to bring the reactants into the same phase.
  4. By pressurizing the reaction vessel to increase the effective concentration of ethylene glycol.
Explanation: This is a transesterification reaction that exists in equilibrium. To drive the reaction to completion, Le Chatelier's principle is applied. Methanol (boiling point ~65 °C) is much more volatile than the other reactants and products (ethylene glycol bp 197 °C, dimethyl terephthalate bp 288 °C). By heating the mixture, the methanol that is formed can be continuously distilled off, removing it from the equilibrium and pulling the reaction toward the formation of more products.

Question 8

A hydroxy ester can undergo intramolecular transesterification to form Lactone A (a five-membered ring) or Lactone B (a six-membered ring), depending on which of two hydroxyl groups attacks the ester. Formation of Lactone A is known to be kinetically favored, while Lactone B is the more thermodynamically stable product. Which conditions would most likely yield Lactone B as the major product?

  1. Catalytic NaOCH₃ in methanol at -78 °C for a short reaction time.
  2. Catalytic H₂SO₄ in benzene at reflux (80 °C) for an extended period. (correct answer)
  3. One equivalent of LDA in THF at -78 °C.
  4. Catalytic NaOCH₃ in methanol at room temperature for a few minutes.
Explanation: To obtain the thermodynamically favored product, the reaction must be run under conditions that allow the initial kinetic product to revert to the starting material and eventually form the more stable product. This requires reversible conditions and sufficient energy and time to overcome the activation barriers. High temperature (reflux) and long reaction times, under reversible acid-catalyzed conditions, will allow the system to reach thermal equilibrium, favoring the most stable product, Lactone B. The other options describe conditions (low temperature, short time) that favor the kinetic product.

Question 9

When preparing an acid catalyst for a transesterification reaction at elevated temperatures, p-toluenesulfonic acid (TsOH) is sometimes preferred over concentrated sulfuric acid (H₂SO₄). What is the most likely chemical reason for this preference?

  1. TsOH is a solid and is easier to weigh and handle than liquid H₂SO₄.
  2. H₂SO₄ is known to be a poor catalyst for transesterification reactions, while TsOH is specifically designed for them.
  3. TsOH is significantly more acidic than H₂SO₄, leading to much faster catalysis of the transesterification.
  4. H₂SO₄ is a strong oxidizing agent and can cause unwanted side reactions like charring, especially at high temperatures. (correct answer)
Explanation: When selecting acid catalysts for organic reactions, you must consider both their catalytic effectiveness and potential for unwanted side reactions, especially under harsh conditions like elevated temperatures. Sulfuric acid (H₂SO₄) is indeed a strong acid and effective catalyst, but it's also a powerful oxidizing agent. At high temperatures, H₂SO₄ can oxidize organic molecules, leading to charring (carbonization) and other destructive side reactions. This is particularly problematic in transesterification reactions involving delicate ester substrates that can be easily degraded. p-Toluenesulfonic acid (TsOH), while still a strong acid (pKa ≈ -2.8), lacks significant oxidizing properties, making it a "cleaner" catalyst that promotes the desired transesterification without causing oxidative decomposition. Option A focuses on practical handling advantages, which while true, isn't the primary chemical reason for choosing TsOH in these reactions. Option B is incorrect because H₂SO₄ is actually an excellent catalyst for transesterification—the issue isn't catalytic ability but side reactions. Also, TsOH wasn't "designed" specifically for transesterification; it's simply a versatile strong acid. Option C is wrong because H₂SO₄ is actually more acidic than TsOH (pKa ≈ -9 vs. -2.8), so acidity strength isn't the determining factor here. The correct answer is D—H₂SO₄'s oxidizing properties cause problematic side reactions at elevated temperatures. Study tip: Remember that catalyst selection often involves balancing reactivity with selectivity. Strong oxidizing acids like H₂SO₄ can be too reactive under harsh conditions, making milder alternatives like TsOH preferable.

Question 10

The industrial synthesis of biodiesel involves the transesterification of triglycerides from vegetable oils with methanol. Why is a catalytic amount of strong base (e.g., NaOH, KOH) typically used instead of a catalytic amount of strong acid (e.g., H₂SO₄)?

  1. The base-catalyzed reaction is significantly faster and can be run at lower temperatures than the acid-catalyzed equivalent. (correct answer)
  2. Acid catalysts would cause unwanted cleavage of the carbon-carbon double bonds present in the fatty acid chains.
  3. The free fatty acids present in crude oils are neutralized by the base, which catalyzes the reaction more effectively.
  4. Acid catalysts are corrosive to the stainless steel reactors used in the process, whereas bases are not.
Explanation: For industrial processes, reaction speed and energy efficiency are paramount. The base-catalyzed transesterification proceeds through a more nucleophilic alkoxide attacker (e.g., CH₃O⁻) compared to the neutral alcohol (CH₃OH) in the acid-catalyzed path. This leads to a much faster reaction rate, allowing the process to be completed in less time and at lower temperatures (e.g., 60 °C vs. >100 °C), which reduces energy costs and simplifies the engineering requirements.

Question 11

An acid-catalyzed transesterification is performed by reacting ethyl propanoate with a large excess of 1-butanol and a catalytic amount of H₂SO₄. Which statement best explains why this reaction proceeds to favor the formation of butyl propanoate?

  1. 1-Butanol is a significantly stronger nucleophile than the ethanol byproduct, which kinetically favors the forward reaction.
  2. The high concentration of 1-butanol shifts the position of the equilibrium toward the products according to Le Chatelier's principle. (correct answer)
  3. The butoxide leaving group is more stable than the ethoxide leaving group, making the reverse reaction thermodynamically unfavorable.
  4. The butyl propanoate product ester is substantially lower in energy than the ethyl propanoate starting material.
Explanation: Transesterification is an equilibrium process. According to Le Chatelier's principle, adding a large excess of a reactant (in this case, 1-butanol) will shift the equilibrium to the right to consume that reactant, thereby favoring the formation of the products (butyl propanoate and ethanol). The intrinsic reactivity and stability of the alcohols and esters involved are very similar, so concentration is the primary driving force.

Question 12

To monitor the progress of a transesterification reaction converting a high molecular weight ester to a lower molecular weight ester, a chemist uses gas chromatography (GC). What change would be observed in the GC trace as the reaction proceeds to completion?

  1. A single peak for the starting ester will gradually increase in area.
  2. Two new peaks of equal area will appear simultaneously, corresponding to the two new products.
  3. The peak for the high MW starting ester will decrease in area, while a new peak with a longer retention time appears and grows.
  4. The peak for the high MW starting ester will decrease in area, while a new peak with a shorter retention time appears and grows. (correct answer)
Explanation: When monitoring organic reactions with gas chromatography, you need to understand how molecular size affects retention time. In GC, compounds are separated based on their boiling points and interactions with the stationary phase - smaller, more volatile molecules elute faster and have shorter retention times than larger molecules. In a transesterification reaction, you're breaking one ester bond and forming another, typically converting a large ester into a smaller one plus an alcohol or different ester. As this reaction proceeds, the high molecular weight starting material decreases while the lower molecular weight product increases. The correct answer is D because the large starting ester will show a decreasing peak area as it's consumed, while the smaller product ester will appear as a new peak with a shorter retention time (since smaller molecules elute faster). This new peak will grow in area as more product forms. Option A is wrong because it suggests only monitoring one compound with increasing area, ignoring that you'd see both starting material disappearing and product appearing. Option B incorrectly assumes two products of equal area will form simultaneously - transesterification typically doesn't produce equal amounts of two new products at the same rate. Option C makes the critical error of suggesting the new product has a longer retention time, which contradicts the principle that smaller molecules (lower MW ester) elute faster. Remember: in GC analysis of reactions, smaller molecules = shorter retention times. Always consider both what's disappearing (starting material) and what's appearing (products) when interpreting chromatographic data.

Question 13

In the acid-catalyzed transesterification of ethyl acetate with methanol, what is the key cationic tetrahedral intermediate formed after the initial nucleophilic attack?

  1. A neutral tetrahedral species with methoxy, ethoxy, hydroxyl, and methyl substituents.
  2. A protonated ether species with positive charge localized on the ethoxy oxygen.
  3. A tetrahedral species with positive charge on the oxygen of the attacking methanol. (correct answer)
  4. A resonance-stabilized acylium ion formed after ethanol elimination.
Explanation: The mechanism begins with protonation of the carbonyl oxygen. Then, the neutral methanol molecule acts as a nucleophile and attacks the carbonyl carbon. This forms a tetrahedral intermediate. Since the attacking nucleophile was neutral, the oxygen atom from the methanol now bears a positive charge in the resulting intermediate. This species is [CH₃C(OH)(OCH₂CH₃)(⁺OHCH₃)]. Subsequent proton transfers lead to the final products.

Question 14

A student reacts ethyl butanoate with a large excess of isopropanol and an acid catalyst. After purification, the product is analyzed by ¹H NMR. The formation of isopropyl butanoate would be best confirmed by the appearance of which characteristic signals?

  1. A quartet around 4.1 ppm and a triplet around 1.2 ppm.
  2. A broad singlet around 11.0 ppm.
  3. A septet around 5.0 ppm and a doublet around 1.2 ppm. (correct answer)
  4. A singlet around 3.7 ppm.
Explanation: Successful transesterification would replace the ethyl group (-OCH₂CH₃) with an isopropyl group (-OCH(CH₃)₂). An isopropyl group has two characteristic signals in ¹H NMR: a single proton on the central carbon, which is split by the six neighboring protons into a septet, typically appearing around 5.0 ppm for an ester. The six equivalent methyl protons are split by the single central proton into a doublet, appearing further upfield around 1.2 ppm. Option A describes the starting ethyl ester. Option B describes a carboxylic acid. Option D describes a methyl ester.

Question 15

When methyl benzoate is treated with sodium ethoxide in ethanol, ethyl benzoate is formed. What is the role of the ethoxide ion in the rate-determining step of this base-catalyzed transesterification?

  1. It acts as a Brønsted-Lowry base to deprotonate the alpha-carbon of the ester, forming an enolate intermediate.
  2. It acts as a Lewis acid, coordinating to the carbonyl oxygen to increase the electrophilicity of the carbonyl carbon.
  3. It acts as a Brønsted-Lowry base, deprotonating the ethanol solvent to generate the active nucleophile.
  4. It acts as a nucleophile, attacking the electrophilic carbonyl carbon to form a tetrahedral intermediate. (correct answer)
Explanation: In a base-catalyzed nucleophilic acyl substitution like transesterification, the rate-determining step is the nucleophilic attack of the alkoxide (ethoxide) on the electrophilic carbonyl carbon of the ester. This attack forms a high-energy tetrahedral intermediate. While ethoxide is a base, its crucial role in the key step is that of a nucleophile.

Question 16

A student wants to convert tert-butyl benzoate to methyl benzoate. Which set of reagents would be LEAST effective for accomplishing this specific transformation directly via transesterification?

  1. CH₃OH (large excess), cat. H₂SO₄
  2. NaOCH₃ (catalytic), CH₃OH (large excess)
  3. CH₃OH (large excess), cat. p-toluenesulfonic acid (TsOH)
    1. NaOH(aq), heat; 2. CH₃I
     (correct answer)
Explanation: Options A, B, and C all describe standard conditions for acid- or base-catalyzed transesterification. Option D describes a two-step process that is not transesterification. First, aqueous NaOH causes irreversible saponification (hydrolysis) to form sodium benzoate. Second, adding methyl iodide (CH₃I) would cause an SN2 reaction with the carboxylate anion to form the methyl ester. While this sequence might produce the desired product, it is not a transesterification reaction and involves a completely different mechanism.

Question 17

Why is it critical for base-catalyzed transesterification to be performed under anhydrous (dry) conditions, whereas acid-catalyzed transesterification can tolerate small amounts of water?

  1. Water acts as an acid, protonating and deactivating the alkoxide catalyst used in the base-catalyzed reaction.
  2. Water allows for a competing irreversible saponification reaction in the presence of the base catalyst. (correct answer)
  3. In acid-catalyzed reactions, water is a necessary co-catalyst that activates the primary acid catalyst.
  4. Water is a poor nucleophile and cannot compete with the alcohol nucleophile in either acidic or basic conditions.
Explanation: In base-catalyzed transesterification, the active catalyst is an alkoxide (RO⁻). If water is present, two problems arise. First, water will react with the alkoxide to form hydroxide (OH⁻) and the parent alcohol, consuming the catalyst. Second, the hydroxide formed is a potent nucleophile that will attack the ester, leading to saponification. Saponification is effectively irreversible because the resulting carboxylate is deprotonated and unreactive toward nucleophiles. This side reaction consumes starting material and prevents the desired equilibrium from being established.

Question 18

A student compares the rate of base-catalyzed transesterification for methyl benzoate and methyl p-nitrobenzoate using sodium ethoxide in ethanol. Which ester reacts faster and why?

  1. Methyl benzoate reacts faster because the nitro group adds significant steric bulk, hindering the reaction.
  2. Methyl p-nitrobenzoate reacts faster because the strongly electron-withdrawing nitro group makes the carbonyl carbon more electrophilic. (correct answer)
  3. Methyl p-nitrobenzoate reacts faster because the nitro group stabilizes the negative charge in the tetrahedral intermediate via resonance.
  4. Both esters react at the same rate because the electronic effect of the para-substituent is too far from the reaction center.
Explanation: The rate-determining step is the nucleophilic attack on the carbonyl carbon. The electrophilicity of this carbon is key. The nitro group (-NO₂) is a powerful electron-withdrawing group. Through both induction and resonance, it pulls electron density away from the benzene ring and, consequently, from the ester's carbonyl carbon. This makes the carbonyl carbon more electron-deficient (more electrophilic) and thus more susceptible to nucleophilic attack, leading to a faster reaction rate. While answer C is also true, B is the more direct cause of the increased reaction rate.

Question 19

The compound ethyl 7-hydroxyheptanoate is treated with a catalytic amount of sodium ethoxide in ethanol. Which of the following outcomes is most likely?

  1. Rapid intramolecular transesterification to form a stable six-membered lactone.
  2. The starting material will be recovered unchanged as the nucleophile and leaving group are identical.
  3. Slow intramolecular transesterification to form an eight-membered lactone. (correct answer)
  4. Intermolecular polymerization to form a linear polyester.
Explanation: The reaction conditions involve an equilibrium between the starting material and any potential products. The nucleophile (ethoxide) is the same as the leaving group, so intermolecular transesterification is degenerate (unproductive). However, the molecule contains a hydroxyl group that can act as an internal nucleophile. Cyclization would lead to an eight-membered ring. While the formation of medium-sized rings (8-11 members) is kinetically slow and often thermodynamically disfavored due to transannular strain, it is the only productive pathway available under these conditions, even if it occurs slowly. No other reaction is plausible.