IB Biology Quiz: Understand Carbohydrates And Lipids
20 questions · exam conditions
0:00
Understand Carbohydrates And LipidsQuestion 1 of 20

A scientist creates two artificial membranes. Membrane A is composed of phospholipids with long, saturated fatty acid tails. Membrane B is composed of phospholipids with short, cis-unsaturated fatty acid tails. If the temperature is gradually lowered, which membrane would be expected to solidify first, and why?

Membrane A, because the straight fatty acid tails can pack together more closely, increasing the intermolecular forces.
Membrane B, because the kinks in the fatty acid tails allow them to interlock, strengthening the membrane.
Membrane A, because the greater number of hydrogen bonds between the saturated tails causes them to crystallize.
Membrane B, because the shorter tails have less surface area, which paradoxically increases the melting point.
← Back to quizzes

IB Biology Quiz

IB Biology Quiz: Understand Carbohydrates And Lipids

Practice Understand Carbohydrates And Lipids in IB Biology with focused quiz questions that help you check what you know, review explanations, and build confidence with test-style prompts.

What this quiz covers

This quiz focuses on Understand Carbohydrates And Lipids, giving you a quick way to practice the rules, question types, and explanations that matter most for IB Biology.

How to use this quiz

Try each quiz question before looking at the correct answer. Use the explanations to review missed ideas, then come back to similar questions until the pattern feels familiar.

All questions

Question 1

A scientist creates two artificial membranes. Membrane A is composed of phospholipids with long, saturated fatty acid tails. Membrane B is composed of phospholipids with short, cis-unsaturated fatty acid tails. If the temperature is gradually lowered, which membrane would be expected to solidify first, and why?

  1. Membrane A, because the straight fatty acid tails can pack together more closely, increasing the intermolecular forces. (correct answer)
  2. Membrane B, because the kinks in the fatty acid tails allow them to interlock, strengthening the membrane.
  3. Membrane A, because the greater number of hydrogen bonds between the saturated tails causes them to crystallize.
  4. Membrane B, because the shorter tails have less surface area, which paradoxically increases the melting point.
Explanation: Membrane fluidity is determined by the packing of phospholipid tails. The long, straight saturated tails in Membrane A can pack very tightly, maximizing van der Waals forces between them. This creates a more viscous membrane that will solidify (freeze) at a relatively higher temperature. The short, cis-unsaturated tails in Membrane B have 'kinks' that prevent tight packing, keeping the tails further apart and reducing intermolecular forces. This maintains fluidity at lower temperatures, so Membrane B will solidify at a lower temperature than Membrane A.

Question 2

A linear polysaccharide is synthesized from 50 glucose molecules. How many molecules of water are produced during its formation, and how many are required for its complete hydrolysis?

  1. 49 produced; 50 required
  2. 50 produced; 50 required
  3. 49 produced; 49 required (correct answer)
  4. 50 produced; 49 required
Explanation: The formation of a polysaccharide from 'n' monomers involves 'n-1' condensation reactions, as each reaction joins two molecules. Therefore, joining 50 glucose molecules requires 49 reactions, each producing one molecule of water, for a total of 49 water molecules produced. Conversely, the complete hydrolysis of this polysaccharide requires the breaking of all 49 glycosidic bonds, which consumes 49 molecules of water.

Question 3

Muscle cells require rapid mobilization of glucose for energy during intense activity. Which structural feature of glycogen, compared to amylopectin, best facilitates this rapid glucose release?

  1. The formation from alpha-glucose monomers, which are more energy-rich than beta-glucose.
  2. A more compact, globular shape, which allows for denser storage of glucose in the limited cell volume.
  3. A greater degree of 1,6-glycosidic branching, providing more terminal ends for simultaneous enzyme action. (correct answer)
  4. The presence of 1,4-glycosidic bonds, which are more easily hydrolyzed by human enzymes than 1,6-bonds.
Explanation: Both glycogen and amylopectin are branched polymers of alpha-glucose. However, glycogen is more highly branched than amylopectin. Enzymes that catalyze the release of glucose (e.g., glycogen phosphorylase) act on the non-reducing ends of the polysaccharide chains. A greater number of branches creates more terminal ends, allowing for many enzymes to act simultaneously, which results in a much faster rate of glucose mobilization to meet the high energy demands of muscle tissue.

Question 4

When phospholipids are vigorously mixed with water, they can form micelles or liposomes. Which property is the primary driver for the spontaneous self-assembly of these structures?

  1. The formation of covalent bonds between the phosphate heads of adjacent phospholipid molecules.
  2. The hydrophobic interactions that cause the fatty acid tails to aggregate and exclude water molecules. (correct answer)
  3. The strong attraction between the charged phosphate groups and the nonpolar fatty acid tails within the same molecule.
  4. The hydrolysis of fatty acid tails, which releases energy to drive the formation of the spherical structures.
Explanation: Phospholipids are amphipathic, meaning they have a hydrophilic (polar) head and hydrophobic (nonpolar) tails. In an aqueous environment, the hydrophobic tails are repelled by water. The most energetically favorable arrangement minimizes the contact between the nonpolar tails and water. This is achieved by the tails aggregating together in the interior of a structure like a micelle or liposome, a phenomenon driven by hydrophobic interactions. This is often referred to as the hydrophobic effect.

Question 5

A biochemist isolates a lipid-soluble molecule from the adrenal gland. The molecule is found to have a molecular formula of C21H30O5 and acts as a hormone. It lacks fatty acid components. What is the most likely class of molecule?

  1. A triglyceride, because it is lipid-soluble and found in an animal gland.
  2. A phospholipid, because hormones are often involved in cell membranes.
  3. A steroid, because of its hormonal function and absence of fatty acids, consistent with a four-ring structure. (correct answer)
  4. A carotenoid, because it is a lipid-soluble pigment derived from isoprene units.
Explanation: The key characteristics are that it is a lipid, acts as a hormone, and crucially, lacks fatty acids. This profile perfectly matches that of a steroid hormone. Steroids are characterized by a four-fused-ring carbon skeleton. Many hormones, such as cortisol (whose formula is C21H30O5) and testosterone, are steroids. Triglycerides and phospholipids both contain fatty acids. Carotenoids are pigments and are not the primary hormones produced by the adrenal gland.

Question 6

Gram for gram, the complete oxidation of a triglyceride yields significantly more ATP than the complete oxidation of a carbohydrate like glucose. What is the primary chemical reason for this difference?

  1. The ester bonds in triglycerides store more potential energy than the glycosidic bonds in carbohydrates.
  2. Carbohydrates are already partially oxidized (higher oxygen-to-carbon ratio), whereas lipids are highly reduced. (correct answer)
  3. The glycerol backbone of a triglyceride can enter glycolysis directly, providing a rapid initial burst of ATP.
  4. Carbohydrates are hydrophilic and stored with a large amount of water, increasing their mass but not their energy content.
Explanation: Energy is released from fuel molecules through oxidation. Lipids consist mainly of long hydrocarbon chains (C and H atoms), making them highly reduced molecules with many C-H bonds. Carbohydrates have a general formula of (CH2O)n, meaning they have a much higher proportion of oxygen and are thus in a more oxidized state than lipids. Because lipids are more reduced, their complete oxidation to CO2 and H2O involves a greater change in oxidation state and releases more energy per unit mass.

Question 7

A student is given a solution containing an unknown disaccharide. Upon adding the enzyme lactase and incubating, the solution is later found to contain both glucose and galactose. What was the original disaccharide and what type of reaction was catalyzed?

  1. Sucrose; condensation
  2. Maltose; hydrolysis
  3. Lactose; hydrolysis (correct answer)
  4. Lactose; condensation
Explanation: The enzyme lactase is specific for the disaccharide lactose. The breakdown of a larger molecule (disaccharide) into its smaller subunits (monosaccharides) by the addition of water is a hydrolysis reaction. The monosaccharide components of lactose are glucose and galactose. Therefore, the original disaccharide was lactose, and the reaction was hydrolysis. Condensation is the opposite reaction, which builds larger molecules.

Question 8

An endurance athlete's trained muscle tissue is compared to that of a sedentary individual. The athlete's muscle cells are found to contain glycogen with a significantly higher degree of branching. What is the most likely metabolic advantage of this adaptation?

  1. Increased branching allows more water to be stored with the glycogen, aiding in cell hydration during exercise.
  2. The compact, spherical nature of highly branched glycogen allows more glucose to be stored per unit volume of the cell.
  3. More branches create more terminal glucose molecules, allowing for a faster rate of glucose release to fuel muscle contraction. (correct answer)
  4. Highly branched glycogen is more resistant to hydrolysis, ensuring a slow and steady release of glucose over a long period.
Explanation: Endurance exercise requires a high and sustained rate of ATP production, which is fueled by glucose. Glycogen is broken down by enzymes that work on the terminal glucose units at the ends of the branches. A higher degree of branching means more non-reducing ends are available simultaneously. This allows for a much faster rate of glycogenolysis (glycogen breakdown), providing a rapid supply of glucose to glycolysis to meet the metabolic demands of the athlete's muscle cells. D describes the opposite of the needed effect.

Question 9

Some prokaryotes can digest cellulose, whereas eukaryotes such as humans cannot. This is due to the presence of the enzyme cellulase in these prokaryotes. What specific chemical bond is targeted by cellulase?

  1. Alpha-1,4 glycosidic bonds between glucose monomers
  2. Beta-1,4 glycosidic bonds between glucose monomers (correct answer)
  3. Ester bonds between glycerol and fatty acids
  4. Hydrogen bonds between parallel cellulose chains
Explanation: Cellulose is a polymer composed of glucose units linked by beta-1,4 glycosidic bonds. The three-dimensional shape of the active site of enzymes is highly specific. Animals that can digest starch have amylase, which recognizes alpha-1,4 glycosidic bonds. They lack cellulase, the enzyme with the correctly shaped active site to bind to and hydrolyze the beta-1,4 glycosidic bonds of cellulose. C refers to lipids, and D refers to the intermolecular forces that hold cellulose chains together, not the covalent bonds within the chains that must be broken for digestion.

Question 10

A scientist analyzes two molecules isolated from a cell. Molecule X is a primary component of the cell membrane. Molecule Y is found in lipid droplets within the cytoplasm. Molecule X has two fatty acid tails and a phosphate group, whereas Molecule Y has three fatty acid tails and no phosphate group. Which statement correctly identifies these molecules?

  1. X is a triglyceride and Y is a phospholipid.
  2. X is a phospholipid and Y is a saturated fat.
  3. X is a steroid and Y is a triglyceride.
  4. X is a phospholipid and Y is a triglyceride. (correct answer)
Explanation: Molecule X's description—a membrane component with two fatty acid tails and a phosphate group—is the definition of a phospholipid. Its amphipathic nature is essential for forming the lipid bilayer. Molecule Y's description—found in storage droplets with three fatty acid tails attached to glycerol—is the definition of a triglyceride, the cell's main energy storage lipid. A swaps the identities. C incorrectly identifies X as a steroid, which has a ring structure. D is imprecise; Y is a triglyceride, which can be composed of saturated or unsaturated fatty acids.

Question 11

An enzyme is used to synthesize a triglyceride from one molecule of glycerol, two molecules of stearic acid (a saturated fatty acid), and one molecule of oleic acid (a monounsaturated fatty acid). How many ester bonds and how many molecules of water are formed in this single synthesis reaction?

  1. 1 ester bond, 1 molecule of water
  2. 2 ester bonds, 2 molecules of water
  3. 3 ester bonds, 3 molecules of water (correct answer)
  4. 4 ester bonds, 4 molecules of water
Explanation: The synthesis of one triglyceride molecule involves joining three fatty acid molecules to the three hydroxyl groups of one glycerol molecule. Each linkage is an ester bond formed through a condensation reaction. Therefore, the formation of one triglyceride molecule always involves the formation of three ester bonds and the corresponding production of three molecules of water, regardless of whether the fatty acids are saturated or unsaturated.

Question 12

Chitin is a structural polysaccharide found in fungal cell walls. It is a polymer of N-acetylglucosamine, a modified form of glucose. Like cellulose, chitin forms strong microfibrils. Based on this structural function, what can be deduced about the glycosidic linkages in chitin?

  1. They are likely alpha-1,4 linkages, allowing for a coiled structure that can be compacted.
  2. They are likely a mix of alpha-1,4 and beta-1,6 linkages, creating a cross-linked mesh.
  3. They are likely alpha-1,6 linkages, creating a highly branched structure for maximum rigidity.
  4. They are likely beta-1,4 linkages, allowing for straight, unbranched chains that can form hydrogen bonds. (correct answer)
Explanation: The question states that chitin serves a structural role and forms strong microfibrils, analogous to cellulose. This function depends on the formation of long, straight, unbranched polysaccharide chains that can align in parallel and form extensive hydrogen bonds with each other. This molecular geometry is achieved through beta-1,4 glycosidic linkages, which cause adjacent monomers to be inverted. Alpha-1,4 linkages (A) lead to helical structures like starch, and alpha-1,6 linkages (C) cause branching like glycogen, neither of which is optimal for forming rigid fibers.

Question 13

The structural integrity of plant cell walls is primarily due to cellulose. Which statement correctly explains how the sub-components of cellulose contribute to its strength?

  1. Alpha-glucose monomers are linked by 1,6-glycosidic bonds, creating a branched structure that cross-links extensively.
  2. Adjacent beta-glucose monomers are oriented 180° to one another, allowing for straight, unbranched chains that form hydrogen bonds with parallel chains. (correct answer)
  3. The helical coiling of individual cellulose chains, similar to starch, allows them to intertwine into strong ropes.
  4. Extensive covalent bonds form between parallel cellulose chains, creating a rigid, cross-linked microfibril network.
Explanation: Cellulose is a polymer of beta-glucose linked by beta-1,4 glycosidic bonds. This type of linkage forces each successive glucose monomer to be inverted 180° relative to its neighbor. This results in long, straight, unbranched chains. These parallel chains can form a large number of hydrogen bonds with each other, bundling them into strong structural units called microfibrils. The other options describe features of starch or glycogen (A, C) or incorrectly identify the type of bond between chains (D).

Question 14

Glucose has the molecular formula C₆H₁₂O₆. What is the molecular formula of sucrose, a disaccharide formed from one glucose and one fructose monomer?

  1. C₁₂H₂₄O₁₂
  2. C₁₂H₂₂O₁₁ (correct answer)
  3. C₁₂H₂₀O₁₀
  4. C₁₁H₂₂O₁₁
Explanation: Sucrose is formed by a condensation reaction between two monosaccharides, glucose (C₆H₁₂O₆) and fructose (an isomer of glucose, also C₆H₁₂O₆). If the atoms were simply added, the formula would be C₁₂H₂₄O₁₂. However, a condensation reaction that forms a glycosidic bond removes one molecule of water (H₂O). Therefore, we must subtract H₂O from the sum: C₁₂H(24-2)O(12-1) = C₁₂H₂₂O₁₁.

Question 15

The blubber of a whale is a thick layer of adipose tissue. Which statement best describes the primary functions of the lipids in this tissue, directly related to their chemical properties?

  1. Phospholipids form a waterproof barrier, while triglycerides provide buoyancy due to their low density compared to water.
  2. Unsaturated triglycerides are the primary energy store, and their bent structure allows the blubber to remain flexible.
  3. Cholesterol increases the fluidity of cell membranes at low temperatures, while unsaturated fats provide insulation.
  4. Saturated triglycerides serve as a long-term energy store and provide thermal insulation due to their dense packing. (correct answer)
Explanation: Whale blubber serves two main purposes: thermal insulation in cold water and long-term energy storage. Triglycerides are the primary lipid class for energy storage. Animal fats are typically high in saturated fatty acids, which pack densely. This dense packing of non-polar molecules is an excellent thermal insulator, and it also represents a very dense store of energy. While lipids do provide buoyancy (A), and cholesterol is important in membranes (C), the primary role of the bulk triglyceride fat in blubber is insulation and energy storage.

Question 16

Ribose and glucose are both essential monosaccharides. Which feature correctly distinguishes ribose from glucose based on their primary biological roles and structure?

  1. Ribose is a component of nucleic acids, whereas glucose is a primary respiratory substrate. (correct answer)
  2. Ribose is a five-carbon sugar, whereas glucose is a disaccharide.
  3. Ribose contains nitrogen in its structure, whereas glucose only contains C, H, and O.
  4. Ribose forms beta-glycosidic bonds, whereas glucose only forms alpha-glycosidic bonds.
Explanation: The primary distinction between these two monosaccharides lies in their function. Ribose is a pentose (five-carbon sugar) that forms the sugar-phosphate backbone of RNA. Glucose is a hexose (six-carbon sugar) that is the main monosaccharide used in cellular respiration to generate ATP. B is incorrect because glucose is a monosaccharide, not a disaccharide. C is incorrect as both are carbohydrates and contain only C, H, and O. D is incorrect as glucose can form both alpha- and beta-glycosidic bonds (in starch and cellulose, respectively).

Question 17

A solution containing starch, sucrose, and triglycerides is treated with pancreatic amylase and incubated at 37°C. After one hour, which molecules would be found in the solution?

  1. Glucose, fructose, and glycerol
  2. Maltose and sucrose only
  3. Glucose, fructose, and fatty acids
  4. Maltose, sucrose, and triglycerides (correct answer)
Explanation: Enzymes are highly specific. Pancreatic amylase specifically catalyzes the hydrolysis of starch (a polysaccharide) into the disaccharide maltose. It has no effect on sucrose (which requires sucrase) or on triglycerides (which require lipases). Therefore, after incubation, the starch will have been converted to maltose, but the sucrose and triglycerides will remain intact in the solution.

Question 18

A food scientist is creating a solid-state lipid product for baking that is stable at room temperature. Which type of fatty acid would be most suitable to predominate in the triglycerides used?

  1. Cis-monounsaturated fatty acids, because their bent structure allows for tight packing.
  2. Trans-polyunsaturated fatty acids, because multiple double bonds increase the melting point significantly.
  3. Long-chain saturated fatty acids, because their straight hydrocarbon chains allow for close packing and strong intermolecular forces. (correct answer)
  4. Short-chain cis-polyunsaturated fatty acids, because they are less prone to oxidation than saturated fats.
Explanation: Lipids that are solid at room temperature (fats) are typically rich in saturated fatty acids. The hydrocarbon chains of saturated fatty acids are straight, allowing the molecules to pack closely together. This proximity maximizes the weak intermolecular (van der Waals) forces, which requires more energy (a higher temperature) to overcome, resulting in a higher melting point. Cis-unsaturated fatty acids have kinks that prevent tight packing, leading to lower melting points (oils).

Question 19

Health authorities recommend limiting the intake of trans fatty acids. What is the biochemical basis for this recommendation compared to their cis-isomers?

  1. Trans fatty acids are completely indigestible by human lipases, leading to their accumulation in adipose tissue.
  2. The linear shape of trans fatty acids allows them to pack more tightly than cis-isomers, raising LDL cholesterol levels similar to saturated fats. (correct answer)
  3. Trans fatty acids contain more double bonds than their cis-isomers, making them more prone to oxidation and cellular damage.
  4. The 'trans' configuration is energetically unstable and readily breaks down into toxic byproducts in the bloodstream.
Explanation: Cis-unsaturated fatty acids have a bend or 'kink' at the double bond, which prevents them from packing closely. Trans fatty acids have a double bond but lack this significant bend, making their overall shape more linear, similar to saturated fatty acids. This linear shape allows them to pack more tightly, which has been shown to increase levels of low-density lipoprotein (LDL), or 'bad' cholesterol, a major risk factor for cardiovascular disease. Trans fats are digestible (A is false), have the same number of double bonds as their cis-isomer (C is false), and are actually more stable than their cis-isomers (D is false).

Question 20

Which statement accurately compares the structures and functions of amylose and cellulose?

  1. Both are unbranched polymers of glucose, but amylose's alpha-1,4 linkages make it a helical energy store, while cellulose's beta-1,4 linkages make it a straight structural component. (correct answer)
  2. Amylose is a branched energy storage polymer found in plants, while cellulose is an unbranched structural polymer found in animals.
  3. Both are unbranched structural polymers, but amylose is found in plants and cellulose is found in fungi.
  4. Amylose is a helical polymer of fructose used for energy storage, while cellulose is a straight polymer of glucose used for structure.
Explanation: This option correctly identifies the key similarities and differences. Both are unbranched polymers of glucose. However, the type of glycosidic bond determines their 3D structure and function. The alpha-1,4 linkages in amylose cause it to form a helix, a compact shape suitable for energy storage. The beta-1,4 linkages in cellulose cause it to form straight chains, which can align to form strong fibers for structural support. B is incorrect as amylose is unbranched and cellulose is not found in animals. C is incorrect as amylose is for energy storage. D is incorrect as amylose is a polymer of glucose.