College Physics Quiz: Induced Currents And Magnetic Forces

20 questions · exam conditions

0:00

Induced Currents And Magnetic ForcesQuestion 1 of 20

A square conducting loop with side length $a$ and resistance $R$ is pulled at constant velocity $v$ out of a uniform magnetic field $B$ perpendicular to the loop. What is the power required to maintain constant velocity during the time the loop is exiting the field?

\frac{B^2a^2v^2}{R}

\frac{B^2a^2v}{R}

\frac{Bav^2}{R}

\frac{Ba^2v}{R}

\frac{B^2av}{R}

← Back to quizzes

College Physics Quiz

College Physics Quiz: Induced Currents And Magnetic Forces

Practice Induced Currents And Magnetic Forces in College Physics with focused quiz questions that help you check what you know, review explanations, and build confidence with test-style prompts.

What this quiz covers

This quiz focuses on Induced Currents And Magnetic Forces, giving you a quick way to practice the rules, question types, and explanations that matter most for College Physics.

How to use this quiz

Try each quiz question before looking at the correct answer. Use the explanations to review missed ideas, then come back to similar questions until the pattern feels familiar.

All questions

Question 1

$\frac{B^2a^2v^2}{R}$ (correct answer)
$\frac{B^2a^2v}{R}$
$\frac{Bav^2}{R}$
$\frac{Ba^2v}{R}$
$\frac{B^2av}{R}$

Explanation: When you see a conducting loop moving through a magnetic field, you're dealing with electromagnetic induction and the power required to overcome the magnetic force that opposes the motion. As the loop exits the field, the changing magnetic flux induces an EMF given by Faraday's law:

\varepsilon = Bav

, where

a

is the side length still in the field and

v

is the velocity. This EMF drives a current

I = \varepsilon/R = Bav/R

through the loop. The magnetic force opposing the motion acts on the current-carrying conductor still in the field:

F = BIa = B \cdot \frac{Bav}{R} \cdot a = \frac{B^2a^2v}{R}

. To maintain constant velocity, you must apply an external force equal to this magnetic force. The power required is then

P = Fv = \frac{B^2a^2v}{R} \cdot v = \frac{B^2a^2v^2}{R}

. Choice A gives this correct result. Choice B (

\frac{B^2a^2v}{R}

) represents the magnetic force, not the power—it's missing the factor of velocity needed for power. Choice C (

\frac{Bav^2}{R}

) incorrectly uses

a

instead of

a^2

, suggesting confusion about which length matters for the magnetic force. Choice D (

\frac{Ba^2v}{R}

) has the wrong velocity dependence and is missing a factor of

B

. Remember: Power problems involving electromagnetic induction typically require you to find both the induced current and the magnetic force, then multiply by velocity. The key insight is that maintaining constant velocity against a velocity-dependent force gives power proportional to

v^2

Question 2

A conducting loop is moving at constant velocity through a uniform magnetic field region. The loop enters the field, travels completely through it, and then exits. During which portion(s) of this motion is an EMF induced in the loop?

Only while the loop is entering the magnetic field region
Only while the loop is completely inside the magnetic field region
Only while the loop is exiting the magnetic field region
While the loop is entering and while it is exiting the field region (correct answer)
During the entire motion from start to finish

Explanation: When you encounter questions about electromagnetic induction, always think about Faraday's law: EMF is induced when there's a change in magnetic flux through a loop. Magnetic flux depends on the magnetic field strength, the area of the loop within the field, and the angle between them. As the loop moves through the magnetic field region, consider what happens to the flux during each phase. When the loop enters the field, the area of the loop within the magnetic field increases, so the flux through the loop increases. This changing flux induces an EMF. When the loop exits the field, the area within the field decreases, so flux decreases, again inducing an EMF. However, when the loop is completely inside the uniform field and moving at constant velocity, the flux remains constant. Even though the loop is moving, the total area within the field stays the same, so there's no change in flux and therefore no induced EMF. Answer A is incorrect because EMF is induced during both entering and exiting phases, not just entering. Answer B is wrong because constant flux while completely inside means no EMF is induced during this phase. Answer C misses that EMF is also induced while entering. Answer D correctly identifies that EMF is induced during both the entering and exiting phases, when flux is actually changing. Remember this key insight: motion alone doesn't create EMF—it's the change in magnetic flux that matters. Look for when the flux is actually changing, not just when there's movement.

Question 3

Two identical conducting loops are placed near each other. When the current in the first loop increases, the induced current in the second loop creates a magnetic field that:

Reinforces the magnetic field change that caused the induction
Opposes the magnetic field change that caused the induction (correct answer)
Is perpendicular to the magnetic field change that caused the induction
Has no definite relationship to the magnetic field that caused the induction
Alternates between reinforcing and opposing the original field change

Explanation: When you encounter problems involving electromagnetic induction between conducting loops, you're dealing with Lenz's Law, which is a fundamental principle governing how induced currents behave in response to changing magnetic fields. As the current in the first loop increases, it creates a strengthening magnetic field that passes through the second loop. This changing magnetic flux induces a current in the second loop according to Faraday's Law. The key insight is that this induced current doesn't flow randomly—it flows in a direction that creates its own magnetic field opposing the original change. This is exactly what answer choice B describes. The induced current in the second loop generates a magnetic field that opposes the strengthening field from the first loop. This opposition is nature's way of "resisting" the change, which is the essence of Lenz's Law. Looking at the incorrect options: Choice A suggests the induced field reinforces the change, which would violate energy conservation by creating a runaway amplification effect. Choice C incorrectly implies the induced field is perpendicular to the original field change, but Lenz's Law specifically requires opposition, not perpendicularity. Choice D is wrong because there's a very definite relationship—the induced field always opposes the change that created it. Remember this pattern: whenever you see electromagnetic induction problems, think "opposition to change." The induced effects always work against whatever caused them, whether it's a changing current, moving magnet, or varying magnetic field. This oppositional relationship is Lenz's Law in action.

Question 4

A circular conducting loop of radius $r$ is placed in a magnetic field $B(t) = B_0\sin(\omega t)$ . If the resistance of the loop is $R$ , what is the average power dissipated over one complete period?

$\frac{B_0^2\pi^2r^4\omega^2}{2R}$ (correct answer)
$\frac{B_0^2\pi^2r^4\omega^2}{R}$
$\frac{B_0^2\pi r^2\omega^2}{2R}$
$\frac{B_0^2\pi r^2\omega^2}{R}$
$\frac{B_0\pi r^2\omega}{R}$

Explanation: When you encounter electromagnetic induction problems with time-varying magnetic fields, you need to apply Faraday's law and then calculate power dissipation. This requires connecting the induced EMF to current and ultimately to power. Start with Faraday's law:

\mathcal{E} = -\frac{d\Phi_B}{dt}

. The magnetic flux through the circular loop is

\Phi_B = B(t) \cdot \pi r^2 = B_0\sin(\omega t) \cdot \pi r^2

. Taking the time derivative:

\mathcal{E} = -\pi r^2 B_0 \omega \cos(\omega t)

. The induced current is

I = \frac{\mathcal{E}}{R} = -\frac{\pi r^2 B_0 \omega \cos(\omega t)}{R}

. The instantaneous power is

P(t) = I^2R = \frac{\pi^2 r^4 B_0^2 \omega^2 \cos^2(\omega t)}{R}

. To find average power over one period, use the fact that

\langle\cos^2(\omega t)\rangle = \frac{1}{2}

. Therefore:

P_{avg} = \frac{\pi^2 r^4 B_0^2 \omega^2}{2R}

. Choice A is correct with this exact expression. Choice B omits the factor of

\frac{1}{2}

from time-averaging

\cos^2(\omega t)

- a common mistake when students forget that the average of

\cos^2

isn't 1. Choice C has

r^2

instead of

r^4

, missing that area appears twice (once in flux, once when squaring the EMF for power). Choice D combines both errors from B and C. Remember: when calculating average power with sinusoidal functions, always account for the

\frac{1}{2}

factor from averaging

\sin^2

\cos^2

terms, and track how geometric factors like area get squared in power calculations.

Question 5

A metal disk rotates about its center in a uniform magnetic field parallel to the rotation axis. A voltmeter is connected between the center and rim of the disk. What causes the voltage reading?

The changing magnetic flux through the disk as it rotates
The centrifugal force acting on free electrons in the rotating disk
The magnetic force on charge carriers moving with the disk's rotation (correct answer)
The induced electric field created by the changing magnetic field
The resistance of the disk material varying with rotation speed

Explanation: This problem tests your understanding of motional EMF and the magnetic force on moving charges. When analyzing rotating conductors in magnetic fields, focus on how the motion of charge carriers creates the observed effects. As the metal disk rotates, free electrons within the conductor move in circular paths with the disk's material. Since the magnetic field is parallel to the rotation axis (pointing along the axis), these moving electrons experience a magnetic force given by

\vec{F} = q\vec{v} \times \vec{B}

. This force acts radially, pushing electrons either toward the center or rim depending on the field direction. This charge separation creates a potential difference between the center and rim, which the voltmeter reads. Answer C correctly identifies this magnetic force on moving charge carriers as the cause. Answer A is wrong because the magnetic flux through the disk doesn't change—the field is uniform and parallel to the rotation axis, so rotation doesn't alter the flux through the disk's surface. Answer B incorrectly invokes centrifugal force, which is a fictitious force in rotating reference frames and doesn't create electric potential differences. Answer D is incorrect because there's no changing magnetic field here; the field is constant and uniform, so no induced electric field exists. Remember that motional EMF problems often involve the magnetic force on charge carriers moving through a magnetic field. When you see rotating conductors in magnetic fields, immediately consider how the

\vec{v} \times \vec{B}

force affects charge distribution, rather than looking for changing flux or fictitious forces.

Question 6

A conducting loop moves at constant velocity through a region where the magnetic field strength increases linearly with position. Which statement best describes the induced current?

The current is constant because the loop moves at constant velocity
The current increases linearly with time because the field increases linearly
The current is constant because the rate of flux change is constant (correct answer)
The current decreases with time due to the increasing magnetic field
The current direction reverses periodically as the loop moves through the field

Explanation: When analyzing electromagnetic induction problems, focus on Faraday's law: the induced EMF (and thus current) depends on the rate of change of magnetic flux, not the absolute values of velocity or field strength. Here's the key insight: since the loop moves at constant velocity through a field that increases linearly with position, the magnetic flux through the loop changes at a constant rate. As the loop travels equal distances in equal time intervals, it encounters equal increases in magnetic field strength during those intervals. This means

\frac{d\Phi}{dt}

is constant, so the induced EMF and current remain constant. Let's examine why the other options miss this crucial point: Option A makes the common error of thinking constant velocity alone determines the current. Velocity affects the rate at which the loop encounters new field regions, but you must also consider how the field varies with position. Option B confuses the spatial variation of the field with temporal variation. While the field increases linearly with position, the rate of flux change through the moving loop is what matters for induction, not the field's spatial gradient directly. Option D incorrectly assumes that stronger magnetic fields somehow reduce current. The field strength itself doesn't determine current direction or magnitude—only the rate of flux change does. Study tip: In moving conductor problems, always identify what's changing with time and at what rate. Don't be distracted by constant velocities or linear field variations—calculate

\frac{d\Phi}{dt}

to find the induced effects.

Question 7

A conducting rod moves perpendicular to its length in a magnetic field. If the rod is cut into two equal pieces that remain in electrical contact, how does this affect the induced EMF and current compared to the original single rod?

EMF is halved, current is halved
EMF is halved, current is unchanged (correct answer)
EMF is unchanged, current is halved
EMF is unchanged, current is unchanged
EMF is doubled, current is doubled

Explanation: When a conducting rod moves through a magnetic field, you're dealing with motional EMF, which depends on the magnetic field strength, the rod's velocity, and the length of the conductor cutting through field lines. The key insight is understanding what happens when you cut the rod but keep the pieces in electrical contact. The induced EMF in each half-rod is given by

\varepsilon = BLv

, where L is now the length of each piece (half the original). Since each piece has half the original length, each generates half the original EMF. However, these two halves are connected in series in the circuit, so their EMFs add together, giving you the same total EMF as the original rod. For current, you need to consider resistance. When you cut the rod in half, each piece has half the resistance of the original rod. But since they're connected in series, the total resistance is the same as before. Using Ohm's law (

I = \varepsilon/R

), with unchanged EMF and unchanged total resistance, the current remains the same. Answer B is correct: EMF is halved (for each individual piece, though they sum to the original total), current is unchanged. Answer A incorrectly assumes current is halved when resistance doesn't actually change. Answer C wrongly claims EMF stays the same for each piece. Answer D misses that we're analyzing individual pieces, not the system as a whole. Remember: when analyzing motional EMF problems, always track both the length of conductor cutting field lines and how the circuit elements are connected electrically.

Question 8

A solenoid with $n$ turns per unit length carries current $I(t) = I_0\cos(\omega t)$ . A conducting loop of area $A$ and resistance $R$ is placed coaxially inside the solenoid. What is the amplitude of the induced current in the loop?

$\frac{\mu_0 n I_0 A \omega}{R}$ (correct answer)
$\frac{\mu_0 n I_0 A \omega \sin(\omega t)}{R}$
$\frac{\mu_0 n I_0 A}{R}$
$\frac{\mu_0 n I_0 A \cos(\omega t)}{R}$
$\frac{n I_0 A \omega}{R}$

Explanation: This problem tests your understanding of electromagnetic induction, specifically Faraday's law combined with Ohm's law. When you see a time-varying current in a solenoid with a loop inside, immediately think about how the changing magnetic flux induces an EMF. The magnetic field inside a solenoid is

B = \mu_0 n I(t) = \mu_0 n I_0 \cos(\omega t)

. The magnetic flux through the loop is

\Phi = BA = \mu_0 n I_0 A \cos(\omega t)

. By Faraday's law, the induced EMF is

\mathcal{E} = -\frac{d\Phi}{dt} = -\mu_0 n I_0 A \frac{d}{dt}[\cos(\omega t)] = \mu_0 n I_0 A \omega \sin(\omega t)

. Using Ohm's law, the induced current is

i = \frac{\mathcal{E}}{R} = \frac{\mu_0 n I_0 A \omega \sin(\omega t)}{R}

. The amplitude of this sinusoidal current is the coefficient of the sine function:

\frac{\mu_0 n I_0 A \omega}{R}

. Answer A correctly gives this amplitude. Answer B shows the complete time-dependent current expression, not just the amplitude - it includes the

\sin(\omega t)

term. Answer C is missing the crucial

\omega

factor, which comes from differentiating the cosine function in Faraday's law. Answer D incorrectly uses cosine instead of sine and also isn't asking for amplitude. Remember: when finding the amplitude of an induced current, you need Faraday's law (which introduces a time derivative) followed by Ohm's law, and amplitude means the coefficient of the oscillating term, not the full time-dependent expression.

Question 9

A conducting loop is pulled through a narrow region of magnetic field at constant velocity. The field region is much smaller than the loop diameter. As the loop passes through, the induced current:

Flows in one direction when entering and the same direction when exiting
Flows in one direction when entering and the opposite direction when exiting (correct answer)
Flows only when the loop is entering the field region
Flows only when the loop is exiting the field region
Maintains constant magnitude throughout the passage

Explanation: This question tests electromagnetic induction, specifically Faraday's law and Lenz's law. When you see problems involving loops moving through magnetic fields, focus on how the magnetic flux through the loop changes over time. As the loop enters the narrow field region, the magnetic flux through it increases. By Faraday's law, this changing flux induces an EMF and current. Lenz's law tells us this current flows in a direction to oppose the change - creating a magnetic field that opposes the flux increase. When the loop exits the field region, the flux through it decreases. Again, Faraday's law creates an induced current, but now Lenz's law demands the current flow in the opposite direction to oppose this flux decrease. The induced current creates a magnetic field trying to maintain the original flux. Looking at the wrong answers: Choice A incorrectly suggests the current flows the same direction both times, violating Lenz's law. The current must reverse to oppose opposite types of flux changes. Choice C claims current only flows when entering - this ignores that exiting also changes the flux and induces current. Choice D makes the opposite error, claiming current only flows when exiting. The correct answer is B: the current flows in opposite directions when entering versus exiting the field. Study tip: Remember that Lenz's law always opposes change. When flux increases, the induced current opposes that increase. When flux decreases, the induced current opposes that decrease. This opposition requires the current to reverse direction.

Question 10

A conducting rod rotates about one end in a uniform magnetic field perpendicular to the plane of rotation. If the rod has length $L$ and angular velocity $\omega$ , what is the potential difference between the ends of the rod?

$\frac{1}{2}BL^2\omega$ (correct answer)
$BL^2\omega$
$\frac{1}{2}BL\omega$
$BL\omega$
$\frac{1}{4}BL^2\omega$

Explanation: This problem involves electromagnetic induction in a rotating conductor, specifically applying Faraday's law to find the motional EMF generated across the rod's length. When the conducting rod rotates in the magnetic field, different points along the rod move at different linear velocities. A point at distance

r

from the pivot moves with velocity

v = \omega r

. This motion through the magnetic field generates an EMF according to

d\mathcal{E} = vB \, dr = B\omega r \, dr

. To find the total potential difference, you must integrate along the entire rod length:

\mathcal{E} = \int_0^L B\omega r \, dr = B\omega \int_0^L r \, dr = B\omega \left[\frac{r^2}{2}\right]_0^L = \frac{1}{2}BL^2\omega

Looking at the incorrect answers: Choice B (

BL^2\omega

) would result if you forgot the factor of

\frac{1}{2}

from integration, treating the velocity as if it were constant at

\omega L

throughout the rod. Choice C (

\frac{1}{2}BL\omega

) incorrectly uses only the rod length

L

instead of

L^2

, missing the quadratic relationship from the

r^2

term in integration. Choice D (

BL\omega

) combines both errors—using

L

instead of

L^2

and omitting the

\frac{1}{2}

factor. Study tip: When dealing with rotating conductors in magnetic fields, remember that velocity varies linearly with distance from the axis, so you'll always need to integrate. The resulting EMF will contain

L^2

(not just

L

) and typically includes factors like

\frac{1}{2}

from integration.

Question 11

A conducting loop is rotated in a uniform magnetic field. At the instant when the plane of the loop is parallel to the magnetic field lines, what can be said about the induced EMF?

The EMF is at its maximum value because flux is changing most rapidly (correct answer)
The EMF is at its minimum value because flux is changing most slowly
The EMF is zero because the flux through the loop is zero at this instant
The EMF is zero because the rate of flux change is zero at this instant
The EMF cannot be determined without knowing the angular velocity

Explanation: When a conducting loop rotates in a uniform magnetic field, you're dealing with electromagnetic induction governed by Faraday's law:

\text{EMF} = -\frac{d\Phi}{dt}

, where the magnetic flux is

\Phi = BA\cos\theta

. As the loop rotates, the angle θ between the magnetic field and the loop's normal vector changes continuously. The rate of flux change depends on

\frac{d}{dt}(BA\cos\theta) = -BA\omega\sin\theta

, where ω is the angular velocity. When the loop's plane is parallel to the magnetic field lines, the field passes through the loop's area most directly, making the flux through the loop maximum (not zero). At this instant, θ = 0°, so

\sin\theta = 0

and

\cos\theta = 1

. However, the flux is changing most rapidly because the geometry is transitioning from maximum flux in one direction to maximum flux in the opposite direction. The induced EMF equals

BA\omega

, which is its maximum value. Option A correctly identifies that EMF is maximum because flux changes most rapidly at this instant. Option B incorrectly suggests EMF is minimum—the rate of change is actually maximum here. Option C wrongly claims the flux is zero when the plane is parallel to field lines; flux is actually maximum. Option D incorrectly states the rate of flux change is zero—this would occur when the plane is perpendicular to the field lines. Remember: maximum flux doesn't mean zero EMF. EMF depends on the rate of flux change, and this rate is greatest when the loop passes through positions of maximum flux.

Question 12

Two identical conducting loops are placed side by side. When the current in one loop is increased at a steady rate, the induced EMF in the second loop depends primarily on:

The final value of current in the first loop
The initial value of current in the first loop
The rate of change of current in the first loop (correct answer)
The total resistance of both loops combined
The average current in the first loop during the change

Explanation: When you encounter problems about electromagnetic induction between conducting loops, focus on Faraday's law, which states that the induced EMF depends on how quickly the magnetic flux through a loop is changing. The key insight is that a changing current in the first loop creates a changing magnetic field, which in turn changes the magnetic flux through the second loop. According to Faraday's law,

\mathcal{E} = -\frac{d\Phi_B}{dt}

, the induced EMF is proportional to the rate of flux change. Since the magnetic field produced by the first loop is directly proportional to its current, the rate of flux change through the second loop depends on how fast the current in the first loop is changing. This makes C correct—the induced EMF depends primarily on the rate of change of current (

\frac{dI}{dt}

) in the first loop. Option A is wrong because the final current value alone doesn't determine the induced EMF—what matters is how fast you're getting there. Option B fails for the same reason; the starting current is irrelevant to the instantaneous EMF being induced. Option D is incorrect because while the total resistance affects the induced current once the EMF is established, it doesn't determine the magnitude of the EMF itself. Remember this pattern: in electromagnetic induction problems, look for rates of change rather than static values. The word "rate" in the question is your clue. Whenever current, magnetic field, or flux is changing, the induced effects depend on how quickly that change occurs, not the absolute values involved.

Question 13

A conducting bar moves through a magnetic field and experiences both an induced EMF and a magnetic force. If the bar's velocity doubles while all other conditions remain the same, how do the induced EMF and magnetic force change?

EMF doubles, magnetic force doubles
EMF doubles, magnetic force quadruples (correct answer)
EMF quadruples, magnetic force doubles
EMF remains constant, magnetic force doubles
EMF quadruples, magnetic force quadruples

Explanation: When a conducting bar moves through a magnetic field, you're dealing with electromagnetic induction and magnetic forces acting simultaneously. Understanding how each depends on velocity is crucial for solving these problems. The induced EMF follows Faraday's law:

EMF = BLv

, where B is magnetic field strength, L is the bar's length, and v is velocity. Since EMF is directly proportional to velocity, doubling the velocity doubles the EMF. The magnetic force on the bar comes from the current flowing through it due to the induced EMF. The current is

I = EMF/R = BLv/R

, and the magnetic force is

F = BIL = B(BLv/R)L = B^2L^2v/R

. Notice that force depends on

v^2

because velocity appears twice: once in the EMF calculation and again when that EMF-driven current experiences the magnetic force. Therefore, doubling velocity quadruples the magnetic force. Looking at the wrong answers: A) incorrectly assumes both quantities scale linearly with velocity, missing the squared relationship for force. C) reverses the relationships entirely—EMF doesn't have a squared dependence on velocity. D) wrongly suggests EMF doesn't change with velocity, contradicting Faraday's law, and understates the force increase. The correct answer is B: EMF doubles, magnetic force quadruples. Study tip: Remember that electromagnetic induction problems often involve "cascading" effects—the induced EMF creates current, which then experiences its own magnetic force. Always trace through each step to identify where velocity appears multiple times in your calculations.

Question 14

A conducting loop in a changing magnetic field has resistance $R$ . If an identical loop is placed next to it in the same changing field, and the two loops are then connected in parallel, how does the current in each loop compare to the current that was in the single loop?

Each loop carries twice the original current
Each loop carries the same current as the original single loop (correct answer)
Each loop carries half the original current
Each loop carries one-fourth the original current
The current depends on how the loops are oriented relative to each other

Explanation: When analyzing electromagnetic induction problems with multiple loops, focus on two key principles: each loop generates its own EMF based on the changing magnetic flux through it, and the total circuit behavior depends on how these EMFs combine. Since both loops are identical and experience the same changing magnetic field, each loop generates the same EMF (

\varepsilon

) as the original single loop. When connected in parallel, these two EMF sources work together. In a parallel circuit with identical voltage sources, each source maintains the same voltage, and the current through each branch depends on that branch's resistance. For each loop in the parallel configuration: the EMF is

\varepsilon

(unchanged) and the resistance is still

R

, so by Ohm's law, the current in each loop is

I = \varepsilon/R

- exactly the same as the original single loop current. Choice A suggests each loop carries twice the current, which would incorrectly assume the EMFs add in series. Choice C (half current) might stem from thinking the EMF gets divided between loops, but EMF doesn't split in parallel circuits. Choice D (one-fourth current) could come from incorrectly applying both EMF division and some resistance combination error. The key insight is that parallel connection of identical EMF sources doesn't change the voltage across each branch - it only affects the total current supplied by the circuit. Study tip: In EMF problems, always identify whether sources are in series (EMFs add) or parallel (EMFs stay the same, currents add). Each loop acts as both a source and a load.

Question 15

Two conducting loops are coaxial and separated by a small distance. When a switch in the first loop is opened, breaking a steady current, what determines the direction of the induced current in the second loop?

The direction of the original current in the first loop
The relative sizes of the two loops
The direction needed to oppose the decreasing magnetic flux (correct answer)
The resistance values of both loops
The distance between the loops

Explanation: When you encounter electromagnetic induction problems involving two loops, you're dealing with Faraday's Law and Lenz's Law working together. The key insight is that changing magnetic flux in one loop creates an induced current in a nearby loop, and that current's direction follows a specific rule. When the switch opens in the first loop, the steady current drops to zero, causing the magnetic field it was producing to decrease. This decreasing magnetic field passes through the second loop, reducing the magnetic flux through it. According to Lenz's Law, the induced current in the second loop will flow in whatever direction creates a magnetic field that opposes this change – specifically, it will flow to produce a magnetic field in the same direction as the original field from the first loop, trying to "replace" what's being lost. Looking at the wrong answers: (A) is incorrect because the original current's direction alone doesn't determine the induced current's direction – what matters is whether the field is increasing or decreasing. (B) is wrong because loop sizes affect the magnitude of induced effects but not the direction, which is governed by Lenz's Law. (D) is incorrect because resistance values determine current magnitude, not direction. The correct answer is (C) because Lenz's Law specifically states that induced currents always flow to oppose the change in magnetic flux that caused them. Remember this pattern: In induction problems, the direction question always comes down to Lenz's Law – the induced effect opposes the change that created it.

Question 16

A conducting rod of mass $m$ and length $L$ starts from rest and slides down two frictionless parallel rails inclined at angle $\theta$ . The rails are connected by a resistor $R$ and the system is in a uniform magnetic field $B$ perpendicular to the plane of the rails. What is the terminal velocity of the rod?

$\frac{mgR\sin\theta}{B^2L^2}$ (correct answer)
$\frac{mgR\cos\theta}{B^2L^2}$
$\frac{mgR}{B^2L^2\sin\theta}$
$\frac{mgR}{B^2L^2\cos\theta}$
$\frac{mgR}{B^2L^2}$

Explanation: When you encounter a conducting rod sliding on rails in a magnetic field, you're dealing with electromagnetic induction and forces reaching equilibrium. The key insight is that as the rod accelerates, it generates a back-EMF that creates a magnetic force opposing its motion until these forces balance. As the rod slides down with velocity

v

, it cuts through magnetic field lines, inducing an EMF of

\varepsilon = BLv

. This drives a current

I = \frac{BLv}{R}

through the circuit. The magnetic force on this current-carrying rod is

F_{mag} = BIL = \frac{B^2L^2v}{R}

, directed up the incline (opposing motion). At terminal velocity, the net force is zero, so the gravitational component down the incline equals the magnetic force:

mg\sin\theta = \frac{B^2L^2v_{terminal}}{R}

. Solving for terminal velocity gives

v_{terminal} = \frac{mgR\sin\theta}{B^2L^2}

. Answer A is correct with this exact expression. Answer B incorrectly uses

\cos\theta

instead of

\sin\theta

, which would represent the component of gravity perpendicular to the incline rather than parallel to it. Answers C and D place the trigonometric function in the denominator, which would make the velocity inversely related to the incline angle—physically unreasonable since steeper inclines should produce higher terminal velocities. Remember: in electromagnetic induction problems, always identify what generates the EMF, find the resulting current and magnetic force, then apply Newton's laws. The component of gravity driving motion down an incline is always

mg\sin\theta

Question 17

A conducting rod of length $L$ slides along two parallel conducting rails in a uniform magnetic field $B$ perpendicular to the plane of the rails. If the rod moves with velocity $v$ and experiences a magnetic force due to the induced current, what happens to the rod's motion if no external force is applied?

The rod continues at constant velocity since no net force acts on it
The rod accelerates because the magnetic force acts in the direction of motion
The rod decelerates and eventually stops due to the opposing magnetic force (correct answer)
The rod oscillates back and forth between the rails with simple harmonic motion
The rod's motion becomes unpredictable due to chaotic electromagnetic effects

Explanation: This question tests electromagnetic induction and Lenz's law, fundamental concepts when conductors move through magnetic fields. When you encounter problems involving moving conductors in magnetic fields, always consider both the induced EMF and the resulting forces. As the rod moves through the magnetic field with velocity

v

, it cuts through magnetic field lines, inducing an EMF of

\varepsilon = BLv

by Faraday's law. This EMF drives a current

I = BLv/R

through the circuit (where

R

is the total resistance). The current-carrying rod then experiences a magnetic force

F = BIL = B^2L^2v/R

due to the interaction between the current and the magnetic field. Crucially, Lenz's law tells us this force opposes the change causing it—the rod's motion. So the magnetic force acts opposite to the velocity, creating a retarding force that slows the rod down. As the rod decelerates, the induced current decreases, reducing the opposing force, but the rod continues to slow until it eventually stops. Choice A is wrong because there is a net force—the magnetic force opposes motion. Choice B incorrectly suggests the magnetic force aids motion, violating Lenz's law. Choice D is incorrect because once stopped, no EMF is induced and no force exists to restart motion, so no oscillation occurs. Remember: Lenz's law ensures that electromagnetic induction always opposes the change that causes it. When you see moving conductors in magnetic fields without external forces, expect deceleration due to this "electromagnetic braking" effect.

Question 18

A conducting bar slides on rails in a magnetic field, generating current that flows through an external resistor. If the magnetic field strength is doubled while keeping all other parameters constant, how does the power dissipated in the resistor change?

Power increases by a factor of 2
Power increases by a factor of 4 (correct answer)
Power increases by a factor of 8
Power remains unchanged
Power decreases by a factor of 2

Explanation: When you encounter electromagnetic induction problems involving moving conductors, focus on how the induced EMF depends on the magnetic field and how power relates to that EMF. A conducting bar moving through a magnetic field generates an EMF given by

\varepsilon = BLv

, where B is the magnetic field strength, L is the length of the conductor, and v is its velocity. When the magnetic field doubles, the induced EMF also doubles since EMF is directly proportional to B. The current flowing through the external resistor is

I = \varepsilon/R = BLv/R

. When B doubles, the current doubles as well. The power dissipated in the resistor is

P = I^2R = \frac{(BLv)^2}{R}

. Since power depends on the square of the current (and therefore the square of B), doubling the magnetic field increases the power by a factor of

2^2 = 4

. This confirms answer B is correct. Looking at the wrong answers: A) suggests power only doubles, which would be true if power were linearly related to magnetic field rather than quadratically. C) proposes an eightfold increase, which might come from incorrectly cubing the field relationship. D) claims no change, which ignores the fundamental dependence of induced EMF on magnetic field strength. Remember this key relationship: in electromagnetic induction problems, power typically scales with the square of the magnetic field because power depends on

I^2

\varepsilon^2

, both of which are proportional to

B^2

Question 19

A conducting rod of length $L = 0.6$ m slides along two parallel conducting rails separated by the same distance $L$ . The rails lie in a horizontal plane and are connected by a resistor $R = 3$ Ω at one end. A uniform magnetic field $B = 0.5$ T points vertically upward. When the rod moves with velocity $v = 4$ m/s perpendicular to its length, what is the magnetic force on the rod due to the induced current?

$0.24$ N opposing the motion of the rod
$0.12$ N in the direction of motion of the rod
$0.24$ N in the direction of motion of the rod
$0.12$ N opposing the motion of the rod (correct answer)

Explanation: First find the induced EMF:

\mathcal{E} = BLv = 0.5 \times 0.6 \times 4 = 1.2

V. The induced current is

I = \mathcal{E}/R = 1.2/3 = 0.4

A. The magnetic force on the current-carrying rod is

F = BIL = 0.5 \times 0.4 \times 0.6 = 0.12

N. By Lenz's law, this force must oppose the motion that causes the induced current, so the force opposes the rod's motion. Choice A uses incorrect current calculation (

I = 0.8

A), choice B has the wrong direction, and choice C has both wrong magnitude and direction.

Question 20

A metal disk of radius $R = 0.3$ m rotates about its central axis with angular velocity $\omega = 10$ rad/s in a uniform magnetic field $B = 0.8$ T parallel to the rotation axis. Conducting brushes make contact at the center and rim of the disk. What is the magnitude of the induced EMF between the center and rim, and which location is at higher potential?

$0.36$ V with the rim at higher potential than the center (correct answer)
$0.72$ V with the center at higher potential than the rim
$0.36$ V with the center at higher potential than the rim
$0.72$ V with the rim at higher potential than the center

Explanation: As the disk rotates, different parts move with different velocities:

v(r) = \omega r

. The motional EMF between center and rim is

\mathcal{E} = \int_0^R (\vec{v} \times \vec{B}) \cdot d\vec{r} = \int_0^R B\omega r \, dr = B\omega \int_0^R r \, dr = B\omega \frac{R^2}{2} = 0.8 \times 10 \times \frac{(0.3)^2}{2} = 0.8 \times 10 \times 0.045 = 0.36

V. The magnetic force on positive charges in the rotating disk pushes them radially outward (using

\vec{F} = q\vec{v} \times \vec{B}

), making the rim positive relative to the center. Choices B and D use the incorrect formula

\mathcal{E} = B\omega R^2 = 0.72

V, and choice C has the wrong polarity.