Chemistry Quiz: Model Electron Configuration
20 questions · exam conditions
0:00
Model Electron ConfigurationQuestion 1 of 20

Oxygen (O) has atomic number 8. What is the electron configuration of a neutral oxygen atom?

1s² 2s² 2p⁶
1s² 2s² 2p⁴
1s² 2s¹ 2p⁵
1s² 2s² 2p³ 3s¹
← Back to quizzes

Chemistry Quiz

Chemistry Quiz: Model Electron Configuration

Practice Model Electron Configuration in Chemistry with focused quiz questions that help you check what you know, review explanations, and build confidence with test-style prompts.

What this quiz covers

This quiz focuses on Model Electron Configuration, giving you a quick way to practice the rules, question types, and explanations that matter most for Chemistry.

How to use this quiz

Try each quiz question before looking at the correct answer. Use the explanations to review missed ideas, then come back to similar questions until the pattern feels familiar.

All questions

Question 1

Oxygen (O) has atomic number 8. What is the electron configuration of a neutral oxygen atom?

  1. 1s² 2s² 2p⁶
  2. 1s² 2s² 2p⁴ (correct answer)
  3. 1s² 2s¹ 2p⁵
  4. 1s² 2s² 2p³ 3s¹
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For oxygen with 8 electrons, fill: 1s² (2), 2s² (4 total), and the remaining 4 go into 2p⁴, giving 1s² 2s² 2p⁴ with 6 valence electrons in shell 2 (2 in 2s + 4 in 2p). Choice B correctly constructs the electron configuration following Aufbau filling order and properly accounts for total 8 electrons. Choice A shows 10 electrons, which would be for neon, not oxygen—always double-check the total electron count matches the atomic number! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell! You're making excellent progress—stay confident!

Question 2

An oxide ion is written as O²⁻. What is the full electron configuration of O²⁻?

  1. 1s² 2s² 2p⁴
  2. 1s² 2s² 2p⁶ (correct answer)
  3. 1s² 2s² 2p⁷
  4. 1s² 2s² 2p⁶ 3s²
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, then 3d, etc. The filling order for the first 20 elements goes: 1s, 2s, 2p, 3s, 3p, 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For O²⁻, oxygen has atomic number 8 but gains 2 electrons (negative charge means more electrons), so 10 electrons: fill 1s² (2), 2s² (4), 2p⁶ (10), with 8 valence electrons in shell 2, matching neon's stable configuration. Choice B correctly constructs the electron configuration following Aufbau filling order and properly accounts for total electrons (atomic number 8 adjusted for -2 charge to 10 electrons). A distractor like A is for neutral oxygen—remember, anions gain electrons to fill the valence shell, so O²⁻ adds 2 to 2p⁴ making 2p⁶! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 3

Which element (atomic number 1-20) has the electron configuration 1s² 2s² 2p⁶ 3s² 3p¹?​

  1. Magnesium (Mg)
  2. Aluminum (Al) (correct answer)
  3. Silicon (Si)
  4. Sodium (Na)
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. The given configuration 1s² 2s² 2p⁶ 3s² 3p¹ has 2+2+6+2+1 = 13 total electrons, which means atomic number 13, corresponding to aluminum (Al). Choice B correctly identifies aluminum as the element with 13 electrons and this configuration. Choice A (Mg) has 12 electrons with configuration ending in 3s², Choice C (Si) has 14 electrons ending in 3p², and Choice D (Na) has only 11 electrons ending in 3s¹. To identify an element from its configuration, count the total electrons - this equals the atomic number for neutral atoms!

Question 4

Which element (atomic numbers 1-20) has the electron configuration 1s² 2s² 2p⁶ 3s² 3p²?

  1. Aluminum (Al)
  2. Silicon (Si) (correct answer)
  3. Phosphorus (P)
  4. Magnesium (Mg)
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! The given configuration 1s² 2s² 2p⁶ 3s² 3p² has 2+2+6+2+2=14 electrons, which matches silicon (atomic number 14), with 4 valence electrons in shell 3 (2 in 3s + 2 in 3p). Choice B correctly identifies silicon as the element with this configuration following the total electron count and filling order. Choice A is aluminum with only 3p¹ (13 electrons), so adding up the superscripts helps spot the difference—always verify the total! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell! You're connecting configurations to elements beautifully—nice!

Question 5

Using the Aufbau filling order (1s, 2s, 2p, 3s, 3p, 4s), what is the electron configuration of the neutral magnesium atom (Mg, atomic number 12)?

  1. 1s² 2s² 2p⁶ 3s¹ 3p¹
  2. 1s² 2s² 2p⁶ 3s² (correct answer)
  3. 1s² 2s² 2p⁵ 3s² 3p¹
  4. 1s² 2s² 2p⁶ 3s² 3p²
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For magnesium (Mg, atomic number 12), we fill: 1s² (2 electrons), 2s² (4 total), 2p⁶ (10 total), 3s² (12 total), so the configuration is 1s² 2s² 2p⁶ 3s², with 2 valence electrons in the 3s subshell. Choice B correctly constructs the electron configuration following Aufbau filling order and properly accounts for total electrons (atomic number 12). For example, choice A incorrectly places electrons in 3p before fully filling 3s, which violates the filling order—keep practicing to spot these! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 6

Nitrogen (N) has atomic number 7. What is the correct electron configuration for a neutral nitrogen atom?

  1. 1s² 2s² 2p²
  2. 1s² 2s² 2p³ (correct answer)
  3. 1s² 2s¹ 2p⁴
  4. 1s² 2p⁵
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For nitrogen with 7 electrons, fill: 1s² (2), 2s² (4 total), and the remaining 3 go into 2p³, giving 1s² 2s² 2p³ with 5 valence electrons in shell 2 (2 in 2s + 3 in 2p). Choice B correctly constructs the electron configuration following Aufbau filling order and properly accounts for total 7 electrons. Choice A underfills 2p with only 2 electrons, but after 2s², the next 3 electrons go into 2p—count carefully to reach exactly 7! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell! You're nailing these configurations—keep the momentum!

Question 7

Using the Aufbau filling order (1s, 2s, 2p, 3s, 3p...), what is the full electron configuration of sulfur (S), atomic number 16?

  1. 1s² 2s² 2p⁶ 3s² 3p⁴ (correct answer)
  2. 1s² 2s² 2p⁶ 3s¹ 3p⁵
  3. 1s² 2s² 2p⁵ 3s² 3p⁵
  4. 1s² 2s² 2p⁶ 3s² 3p⁶
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, then 3d, etc. The filling order for the first 20 elements goes: 1s, 2s, 2p, 3s, 3p, 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For sulfur with atomic number 16, we fill: 1s² (2 electrons), 2s² (4 total), 2p⁶ (10 total), 3s² (12 total), and 3p⁴ (16 total), so the configuration is 1s² 2s² 2p⁶ 3s² 3p⁴, with 6 valence electrons in shell 3 (2 in 3s + 4 in 3p). Choice A correctly constructs the electron configuration following Aufbau filling order and properly accounts for total electrons (atomic number 16). A common distractor like D overfills 3p to 6 electrons, but sulfur has only 4 electrons in 3p since 12 electrons fill up to 3s², leaving 4 for 3p—remember to count precisely! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 8

Write the electron configuration for the neutral fluorine atom (F, atomic number 9).

  1. 1s² 2s² 2p⁶
  2. 1s² 2s² 2p⁵ (correct answer)
  3. 1s² 2s² 2p⁷
  4. 1s² 2s¹ 2p⁶
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For fluorine (F, atomic number 9), fill: 1s² (2), 2s² (4), 2p⁵ (9 total), so 1s² 2s² 2p⁵, with 7 valence electrons in shell 2 (2+5=7). Choice B correctly constructs the electron configuration following Aufbau filling order and properly accounts for total electrons (atomic number 9). For example, choice C has 2p⁷, which exceeds the maximum 6 for p subshell—remember Pauli limits! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 9

What is the electron configuration of the sodium ion, Na⁺ (sodium has atomic number 11)?

  1. 1s² 2s² 2p⁶ (correct answer)
  2. 1s² 2s² 2p⁶ 3s¹
  3. 1s² 2s² 2p⁵ 3s²
  4. 1s² 2s² 2p⁶ 3s²
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For Na⁺ (sodium atomic number 11, but ion has 10 electrons), start with neutral Na 1s² 2s² 2p⁶ 3s¹ and remove 1 electron from the valence 3s, resulting in 1s² 2s² 2p⁶, with no valence electrons in shell 3 anymore (it matches neon's configuration). Choice A correctly constructs the electron configuration following Aufbau filling order and properly accounts for total electrons adjusted for ion charge (11 - 1 = 10). For example, choice B keeps the 3s¹, which would be neutral Na, not the ion—great job spotting that cations lose electrons! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 10

How many electrons are in the outermost shell of phosphorus (P), atomic number 15?

  1. 3
  2. 5 (correct answer)
  3. 8
  4. 15
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, then 3d, etc. The filling order for the first 20 elements goes: 1s, 2s, 2p, 3s, 3p, 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For phosphorus with atomic number 15, configuration is 1s² 2s² 2p⁶ 3s² 3p³, so outermost shell 3 has 2 (3s) + 3 (3p) = 5 electrons, matching group 15. Choice B correctly counts 5 electrons in the outermost shell. A distractor like A might only count 3p, but include the entire shell—add 3s and 3p for the total in shell 3! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 11

How many valence electrons does chlorine (Cl), atomic number 17, have?

  1. 2
  2. 5
  3. 7 (correct answer)
  4. 17
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, then 3d, etc. The filling order for the first 20 elements goes: 1s, 2s, 2p, 3s, 3p, 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For chlorine with atomic number 17, the configuration is 1s² 2s² 2p⁶ 3s² 3p⁵, so the outermost shell 3 has 2 (in 3s) + 5 (in 3p) = 7 valence electrons, which matches its group 17 position. Choice C correctly identifies 7 valence electrons following the configuration and valence counting. A distractor like B might count only the 3p electrons, but remember to include all electrons in the highest shell, so add 3s and 3p together for valence! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 12

Which full electron configuration correctly represents fluorine (F), atomic number 9?

  1. 1s² 2s² 2p⁵ (correct answer)
  2. 1s² 2s² 2p⁶
  3. 1s² 2s¹ 2p⁶
  4. 1s² 2s² 2p⁷
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, then 3d, etc. The filling order for the first 20 elements goes: 1s, 2s, 2p, 3s, 3p, 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For fluorine with atomic number 9, fill: 1s² (2), 2s² (4), 2p⁵ (9), so configuration 1s² 2s² 2p⁵, with 7 valence electrons in shell 2 (2+5). Choice A correctly constructs the electron configuration following Aufbau filling order and properly accounts for total electrons (atomic number 9). A distractor like B has 2p⁶, which is 10 electrons for neon—fluorine has only 9, so stop at 2p⁵ after adding exactly 9! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 13

What is the full electron configuration of magnesium (Mg), atomic number 12?

  1. 1s² 2s² 2p⁶ 3s¹
  2. 1s² 2s² 2p⁶ 3s² (correct answer)
  3. 1s² 2s² 2p⁶ 3p²
  4. 1s² 2s² 2p⁸ 3s²
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, then 3d, etc. The filling order for the first 20 elements goes: 1s, 2s, 2p, 3s, 3p, 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For magnesium with atomic number 12, fill: 1s² (2), 2s² (4), 2p⁶ (10), 3s² (12), so configuration 1s² 2s² 2p⁶ 3s², with 2 valence electrons in shell 3. Choice B correctly constructs the electron configuration following Aufbau filling order and properly accounts for total electrons (atomic number 12). A distractor like D uses 2p⁸, but 2p can hold only 6 electrons max—always respect subshell capacities: s=2, p=6! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 14

Magnesium has atomic number 12. When magnesium forms Mg²⁺, which electron configuration represents Mg²⁺?

  1. 1s² 2s² 2p⁶ 3s²
  2. 1s² 2s² 2p⁶ (correct answer)
  3. 1s² 2s² 2p⁴ 3s²
  4. 1s² 2s² 2p⁶ 3s¹
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For Mg²⁺ (magnesium atomic number 12, ion has 10 electrons), start with neutral Mg 1s² 2s² 2p⁶ 3s² and remove 2 electrons from valence 3s, resulting in 1s² 2s² 2p⁶ (matching neon). Choice B correctly constructs the electron configuration following Aufbau filling order and properly accounts for total electrons adjusted for ion charge (12 - 2 = 10). For example, choice A is neutral Mg, not accounting for electron loss—cations lose from the outer shell first! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 15

Calcium has atomic number 20. What is the electron configuration of a neutral calcium atom (Ca)?

  1. 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² (correct answer)
  2. 1s² 2s² 2p⁶ 3s² 3p⁸
  3. 1s² 2s² 2p⁶ 3s² 3p⁶ 3d²
  4. 1s² 2s² 2p⁶ 3s² 3p⁵ 4s³
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For calcium (Ca, atomic number 20), fill up to 3p⁶ (18 electrons), then add 4s² (20 total), so 1s² 2s² 2p⁶ 3s² 3p⁶ 4s², with 2 valence electrons in shell 4. Choice A correctly constructs the electron configuration following Aufbau filling order and properly accounts for total electrons (atomic number 20). For example, choice C incorrectly places electrons in 3d before 4s, but remember 4s fills before 3d for these elements—keep that order in mind! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 16

Chlorine has atomic number 17. How many valence electrons does a neutral chlorine atom (Cl) have?

  1. 2
  2. 5
  3. 7 (correct answer)
  4. 17
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! For chlorine (Cl, atomic number 17), the configuration is 1s² 2s² 2p⁶ 3s² 3p⁵, so the outermost shell (n=3) has 2 (in 3s) + 5 (in 3p) = 7 valence electrons, which matches its group 17 position. Choice C correctly identifies 7 valence electrons based on the configuration and group number shortcut. For example, choice A might come from miscounting only the 3s electrons—remember to add all in the highest shell! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 17

Which element (atomic number 1-20) has the electron configuration 1s² 2s² 2p⁶ 3s² 3p⁴?

  1. Phosphorus (P)
  2. Sulfur (S) (correct answer)
  3. Chlorine (Cl)
  4. Argon (Ar)
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! The given configuration 1s² 2s² 2p⁶ 3s² 3p⁴ has 2+2+6+2+4=16 electrons, which matches sulfur (S, atomic number 16), with 6 valence electrons in shell 3 (2+4=6). Choice B correctly identifies sulfur as the element with this configuration following Aufbau order. For example, choice A is phosphorus with 3p³ (15 electrons)—add up the superscripts to find the atomic number! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 18

A neutral atom has 2 electrons in the first shell, 8 electrons in the second shell, and 3 electrons in the third shell (shell model: 2-8-3). Which electron configuration matches this atom?

  1. 1s² 2s² 2p⁶ 3s² 3p¹ (correct answer)
  2. 1s² 2s² 2p⁶ 3s¹ 3p²
  3. 1s² 2s² 2p⁶ 3s² 3p³
  4. 1s² 2s² 2p⁶ 3s³
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. Electrons fill in a specific order from lowest to highest energy: 1s (holds 2), then 2s (holds 2), then 2p (holds 6), then 3s (holds 2), then 3p (holds 6), then 4s, and you keep adding electrons until you've placed all of them (total electrons = atomic number for neutral atoms). Valence electrons are the electrons in the outermost shell—these are the ones involved in bonding and chemical reactions! The shell model 2-8-3 means shell 1: 1s² (2), shell 2: 2s² 2p⁶ (8), shell 3: 3s² 3p¹ (3), totaling 13 electrons, which is 1s² 2s² 2p⁶ 3s² 3p¹ for aluminum. Choice A correctly constructs the electron configuration following Aufbau filling order and matches the shell electron counts. For example, choice B has 3s¹ 3p², which is still 3 electrons in shell 3 but violates filling order by not completing 3s first—always fill s before p in the same shell! The electron configuration recipe for elements 1-20: (1) Determine total electrons: atomic number for neutral atoms, atomic number minus charge for ions (Na⁺ has 11 - 1 = 10 electrons). (2) Fill in order: 1s (add 2 electrons), 2s (add 2 more), 2p (add 6 more), 3s (add 2 more), 3p (add 6 more), 4s (add 2 more). Stop when you've placed all electrons. (3) Write configuration: 1s² 2s² 2p⁶ 3s¹ for sodium (11 total: 2+2+6+1=11). Check your total matches atomic number! (4) Identify valence: the outermost shell (highest n) electrons. For sodium 1s² 2s² 2p⁶ 3s¹, the outermost shell is shell 3 with 1 electron, so 1 valence electron. For oxygen 1s² 2s² 2p⁴, outermost is shell 2 with 2+4=6 electrons, so 6 valence electrons. Quick valence shortcut for main group elements: group number often equals valence electrons! Group 1 = 1 valence, group 2 = 2 valence, group 13 = 3 valence, group 14 = 4 valence, etc. For ions, remember: cations (positive) LOSE electrons from outermost shell first. Na (1s² 2s² 2p⁶ 3s¹) loses that 3s¹ to become Na⁺ (1s² 2s² 2p⁶). Anions (negative) GAIN electrons into valence shell. F (1s² 2s² 2p⁵) gains 1 in 2p to become F⁻ (1s² 2s² 2p⁶). Check: does your ion configuration make sense? Cations should look like previous noble gas, anions should complete the outer shell!

Question 19

A neutral atom has 2 electrons in the first shell, 8 in the second shell, and 5 in the third shell (total 15 electrons). Which electron configuration matches this shell distribution?​

  1. 1s² 2s² 2p⁶ 3s² 3p³ (correct answer)
  2. 1s² 2s² 2p⁶ 3s² 3p⁵
  3. 1s² 2s² 2p⁶ 3s¹ 3p⁴
  4. 1s² 2s² 2p⁶ 3s² 3p²
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. With 2 electrons in shell 1, 8 in shell 2, and 5 in shell 3 (total 15), we need to distribute these properly: shell 1 contains only 1s² (2 electrons), shell 2 contains 2s² 2p⁶ (8 electrons), and shell 3 contains 3s² 3p³ (5 electrons), giving configuration 1s² 2s² 2p⁶ 3s² 3p³. Choice A correctly shows this configuration matching the shell distribution. Choice B has 7 electrons in shell 3 (3s² 3p⁵), Choice C incorrectly distributes shell 3 electrons, and Choice D has only 4 electrons in shell 3. Remember: shells contain multiple subshells - shell 3 includes both 3s and 3p subshells!

Question 20

Calcium (Ca) has atomic number 20. What is the correct electron configuration for a neutral calcium atom (fill through 4s as needed)?​

  1. 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² (correct answer)
  2. 1s² 2s² 2p⁶ 3s² 3p⁶ 3d²
  3. 1s² 2s² 2p⁶ 3s² 3p⁸
  4. 1s² 2s² 2p⁶ 3s² 3p⁵ 4s³
Explanation: This question tests your ability to construct electron configurations showing how electrons are distributed in shells and subshells around the nucleus, following the Aufbau principle (filling order), Pauli exclusion principle (max 2 per orbital), and recognizing valence electrons. Electron configuration describes where electrons are located using notation like 1s² 2s² 2p⁶ where the number indicates the shell (1, 2, 3...), the letter indicates the subshell type (s, p, d), and the superscript shows how many electrons are in that subshell. For calcium with atomic number 20, we place 20 electrons following the extended filling order: 1s² (2) + 2s² (2) + 2p⁶ (6) + 3s² (2) + 3p⁶ (6) + 4s² (2) = 20 total electrons, giving configuration 1s² 2s² 2p⁶ 3s² 3p⁶ 4s². Choice A correctly shows this configuration - note that 4s fills before 3d in the Aufbau order! Choice B incorrectly fills 3d before completing 4s, Choice C impossibly puts 8 electrons in 3p (max is 6), and Choice D has too many electrons. The key insight: for elements 19-20 (K and Ca), the 4s subshell fills before 3d due to energy considerations!