Autodesk Fusion 360 Quiz: Repairing Failed Features
10 questions · exam conditions
0:00
Repairing Failed FeaturesQuestion 1 of 10

After changing a base sketch dimension, an Extrude near the beginning of the timeline shows an error. A later Fillet and Shell also show errors because they depend on faces created by that Extrude.

What is the most effective first step for repairing the model?

Edit the earliest failed Extrude and repair its missing profile or extent reference.
Edit the final Shell and select new faces before repairing the other features.
Suppress the failed Fillet and Shell so the Extrude can calculate independently.
Delete all three failed features and recreate them at the end of the timeline.
← Back to quizzes

Autodesk Fusion 360 Quiz

Autodesk Fusion 360 Quiz: Repairing Failed Features

Practice Repairing Failed Features in Autodesk Fusion 360 with focused quiz questions that help you check what you know, review explanations, and build confidence with test-style prompts.

What this quiz covers

This quiz focuses on Repairing Failed Features, giving you a quick way to practice the rules, question types, and explanations that matter most for Autodesk Fusion 360.

How to use this quiz

Try each quiz question before looking at the correct answer. Use the explanations to review missed ideas, then come back to similar questions until the pattern feels familiar.

All questions

Question 1

After changing a base sketch dimension, an Extrude near the beginning of the timeline shows an error. A later Fillet and Shell also show errors because they depend on faces created by that Extrude.

What is the most effective first step for repairing the model?

  1. Edit the earliest failed Extrude and repair its missing profile or extent reference. (correct answer)
  2. Edit the final Shell and select new faces before repairing the other features.
  3. Suppress the failed Fillet and Shell so the Extrude can calculate independently.
  4. Delete all three failed features and recreate them at the end of the timeline.
Explanation: When working with Fusion 360's parametric timeline, features are ordered sequentially, and each feature can depend on geometry created by earlier ones. When an upstream feature fails, everything downstream that references its geometry inherits that failure — like a chain reaction. Questions like this are testing whether you understand that you must fix errors at their source first, before downstream errors can even be evaluated. The most effective first step is A — editing the earliest failed Extrude to repair its missing profile or extent reference. Because the Fillet and Shell depend on faces that the Extrude produces, those downstream features cannot resolve until valid geometry exists for them to reference. Once the Extrude is corrected, Fusion 360 will attempt to recompute the timeline in order, and the Fillet and Shell errors may resolve automatically without any additional intervention. B is backwards thinking. Editing the Shell first is pointless because the faces it needs don't exist yet — the upstream Extrude hasn't produced valid geometry. You'd be selecting references into a broken model. C sounds reasonable but wastes time. Suppressing the Fillet and Shell doesn't help the Extrude recalculate correctly; the Extrude's failure is independent of those later features. Suppression just hides symptoms. D is unnecessarily destructive. Deleting and recreating features means losing their parametric history and relationships. Fusion 360 is designed to let you edit existing features, which preserves design intent. A useful rule of thumb: always scroll to the earliest error in the timeline and fix upstream before touching downstream. Many downstream errors disappear on their own once the root cause is resolved.

Question 2

A sketch originally contained a closed loop used by an Extrude. After one sketch segment was trimmed, a small gap remained. The Extrude now reports that its selected profile is missing.

Which repair sequence best preserves the original design intent?

  1. Edit the Extrude first and select the individual sketch curves as its new profile.
  2. Close the gap in the sketch, finish the sketch, and reselect the closed profile if required. (correct answer)
  3. Change the Extrude operation from Join to New Body, then recompute the timeline.
  4. Replace the Extrude with a Press Pull operation applied to the remaining sketch curves.
Explanation: When working in Fusion 360's parametric timeline, the golden rule is: fix problems at their source, not by patching downstream features. When an Extrude loses its profile, it's almost always because the underlying sketch geometry broke — and the right move is to return to that sketch and restore the geometry first. In this scenario, trimming a segment created a gap, turning a closed loop into an open chain. Fusion 360 requires a fully closed profile to define an extrusion region. By re-entering the sketch, closing the gap (using Sketch > Fix or simply extending/adding a line segment), and finishing the sketch, the closed loop is restored. The Extrude feature can then recognize its original profile again — preserving the design intent exactly as modeled. This is why B is correct. A is a workaround, not a repair. Selecting individual curves instead of a closed profile is imprecise and loses the parametric relationship to the original loop — future sketch edits won't propagate cleanly. C changes the Boolean operation type (Join vs. New Body), which has nothing to do with the missing profile error; the Extrude still can't find a valid region to operate on. D replaces the Extrude entirely with Press Pull, which is a different workflow and abandons the original feature, breaking design intent and timeline continuity. Study tip: On Fusion 360 questions, when a downstream feature (like Extrude) breaks, always ask "Is the sketch geometry valid?" before touching the feature itself. Repairing geometry upstream almost always resolves profile errors without compromising the parametric model.

Question 3

A sketch was created on a planar face produced by an early Extrude. The Extrude was modified so that face no longer exists. The sketch now has a lost support plane, but its dimensions and internal geometry are still useful.

Which action is the best initial repair for the sketch?

  1. Use Redefine Sketch Plane to assign a suitable existing planar face or construction plane. (correct answer)
  2. Convert every sketch entity to construction geometry and rebuild the downstream features.
  3. Move the sketch after the final feature so it no longer depends on the early Extrude.
  4. Create an offset copy of the body and use it to recover the deleted support face.
Explanation: When a sketch loses its support plane in Fusion 360 — meaning the face it was drawn on no longer exists — the sketch becomes "broken" in the timeline, but its internal geometry and constraints remain intact. The right instinct here is to reassign the plane rather than rebuild or workaround it. Redefine Sketch Plane is Fusion 360's built-in tool for exactly this scenario. By right-clicking the sketch in the timeline and selecting "Redefine Sketch Plane," you can point the sketch to any valid planar face or construction plane. The geometry, dimensions, and constraints are preserved — only the host plane changes. This makes A the correct and most efficient first repair step. B is unnecessarily destructive. Converting entities to construction geometry strips them of their profile role, meaning they can no longer drive features. You'd be discarding the very geometry the passage says is still useful. C is a misunderstanding of how Fusion 360's parametric timeline works. Reordering the sketch after the final feature doesn't resolve the missing plane dependency — the sketch still references a face that no longer exists, so the broken reference persists regardless of position. D involves creating an offset copy of the body to recover a deleted face, which is a roundabout workaround that introduces unnecessary complexity and doesn't address the root problem: the sketch simply needs a valid plane to live on. Study tip: On Fusion 360 questions involving broken references or lost geometry, always look for the option that reassigns or redirects the dependency rather than rebuilds or destroys it — Fusion 360 is designed to keep data recoverable wherever possible.

Question 4

A sketch contains projected geometry from a model edge. An upstream edit replaced that edge, and the projection is now reported as lost. Several dimensions are constrained to the projected entity, so deleting it would require additional rework.

Which repair most directly preserves the sketch relationships?

  1. Suppress the upstream edit so the original projected edge remains available to the sketch.
  2. Break the projection link and leave the existing projected entity fixed in its current position.
  3. Delete the projected entity and fully constrain an unrelated line in approximately the same location.
  4. Edit the sketch, locate the lost projection indicator, and relink it to the corresponding replacement edge. (correct answer)
Explanation: When Fusion 360 reports a "lost" or broken projection in a sketch, you're dealing with a parametric reference that can no longer find its source geometry. The key concept here is preserving sketch relationships — meaning dimensions, constraints, and downstream features should survive the repair with minimal disruption. The goal is to reconnect the broken link rather than work around it. The most direct solution is D: editing the sketch, identifying the lost projection indicator (usually shown as a red or yellow entity), and relinking it to the replacement edge that now exists on the model. Fusion 360's "Fix/Unfix" and projection relink workflows allow you to point an existing projected entity at a new source, restoring the parametric chain. All dimensions already constrained to that entity remain intact — no rework needed. Answer A is tempting but counterproductive. Suppressing the upstream edit avoids the problem rather than solving it; it also means your model history no longer reflects the intended design intent, and the suppressed feature will need to be addressed eventually. Answer B — breaking the link and leaving the entity fixed — freezes the geometry at its current position. This sacrifices the parametric relationship entirely. The sketch becomes "dumb" at that location, and future model changes won't update it correctly. Answer C is the most disruptive option. Deleting the projected entity destroys all associated dimensions and constraints, requiring full reconstruction — exactly the rework the question says you want to avoid. As a study tip: on parametric modeling questions, always favor relinking over rebuilding. Fusion 360 is designed to preserve design intent; look for the repair tool that reconnects rather than replaces.

Question 5

A Shell feature was configured by selecting a face to remove. An intentional upstream change split that face into two smaller faces. The Shell now fails, and both smaller faces must be open in the finished part.

What should be done to repair the Shell while retaining its original thickness?

  1. Add a Delete Face feature after the failed Shell to remove the two replacement faces.
  2. Increase the Shell thickness until Fusion automatically recognizes the split faces.
  3. Select the entire body as the Shell input and clear all face-removal selections.
  4. Edit the Shell and select both replacement faces in its faces-to-remove selection. (correct answer)
Explanation: When a parametric feature like Shell loses its referenced geometry due to upstream changes, Fusion 360 flags an error because the face ID it originally tracked no longer exists. The solution isn't to work around the Shell — it's to update the Shell's own inputs to reflect the new geometry. This is the essence of parametric repair: edit the broken feature and repoint its selections to the current, valid geometry. In this scenario, the original single face was split into two faces upstream. The Shell still holds its original thickness value, which is exactly what you want to preserve. By editing the Shell feature (D) and selecting both replacement faces in the faces-to-remove list, you restore the feature's intent — an open shell with the correct thickness — using the geometry that actually exists. No thickness value changes hands, and the model's downstream history remains intact. Choice A is tempting but wrong: a Delete Face feature operates after the Shell and doesn't fix the root cause. The Shell still fails in the timeline, and Delete Face can't compensate for a broken upstream feature. Choice B misunderstands how Fusion handles face references — increasing thickness has no effect on face selection or recognition; the tool doesn't auto-discover missing face references by adjusting parameters. Choice C would remove all openings entirely, defeating the purpose of the Shell and requiring you to redefine everything from scratch. As a study tip, remember that when a parametric feature fails due to topology changes, your first instinct should always be to edit that feature and reselect the new geometry — not add workarounds downstream or adjust unrelated parameters.

Question 6

A Circular Pattern duplicates a cut feature. Both the cut and the pattern show errors after the cut's placement sketch loses a face reference. The pattern axis is still valid.

Which workflow is most likely to restore both features with the least rework?

  1. Change the Circular Pattern object type from Features to Bodies without repairing the cut.
  2. Edit the Circular Pattern first and replace the failed cut with the placement sketch.
  3. Repair the placement sketch and source cut first, then recompute and verify the pattern. (correct answer)
  4. Delete the source cut and use the failed pattern occurrences as independent cutting tools.
Explanation: When working with parametric features in Fusion 360, the golden rule is to fix errors upstream before downstream. Features in the timeline are dependent on one another — a pattern that references a cut feature inherits any errors that cut carries. If the source is broken, anything built on top of it will also be broken. Here, the cut feature fails because its placement sketch lost a face reference. The Circular Pattern then fails because its source object is invalid. The correct path is C: repair the placement sketch first, which restores the source cut, and then let Fusion 360 recompute the pattern automatically. Since the pattern axis is still valid, the pattern itself needs no manual intervention — it simply needs a healthy source to reference. A is wrong because changing the object type from Features to Bodies doesn't address the root cause — the broken sketch reference. You'd be reconfiguring a pattern around a feature that still doesn't work correctly, likely creating new geometry errors. B is wrong because it skips repairing the actual problem. You cannot replace the failed cut with a placement sketch inside the pattern dialog — those are different object types, and the pattern expects a solid feature as its source, not a sketch. D is wrong because deleting the source cut destroys your parametric history. Using failed pattern occurrences as independent cutting tools abandons the associative workflow entirely, creating a maintenance nightmare if the design changes later. Study tip: On Fusion 360 questions involving cascading errors, always trace the failure back to its earliest point in the timeline — fix the root, and dependent features often resolve themselves.

Question 7

A construction plane was defined through three model points. One point disappeared after an upstream feature was edited, causing the plane and a sketch created on it to fail. Three other existing points define the same intended plane.

Which repair best maintains the established timeline structure?

  1. Move the failed construction plane after its dependent sketch and recompute the design.
  2. Edit the dependent sketch and redefine it directly onto one of the three replacement points.
  3. Edit the construction plane and replace its invalid point selection with the three valid points. (correct answer)
  4. Ground the component containing the plane so its original three-point definition becomes fixed.
Explanation: When working with dependent features in Fusion 360's parametric timeline, the golden rule is to fix failures at their source rather than patching downstream effects. A construction plane defined by three points sits upstream of any sketch built on it — so when one defining point disappears, the plane itself is the broken link you need to address directly. Editing the construction plane and substituting the three valid replacement points (choice C) is the correct repair because it restores the plane's definition at exactly the level where the failure originated. The dependent sketch, which references that plane, automatically recomputes once the plane is healthy again. You preserve the original timeline order, all downstream features remain in their correct positions, and the design intent stays intact. Choice A is flawed because reordering features in the timeline doesn't fix an invalid input — it just shuffles a broken element around. Moving the plane after its dependent sketch doesn't make the missing point reappear. Choice B treats the symptom rather than the disease: redefining the sketch onto a single replacement point abandons the three-point plane entirely and likely changes the sketch's orientation or reference frame, corrupting design intent. Choice D misunderstands what grounding does — grounding locks a component's position in space relative to the origin, but it cannot resurrect a deleted point or validate a broken point-selection reference inside a construction plane definition. The key study tip here: in Fusion 360, always trace failures upstream to their root cause. If a feature fails because of a bad input, edit that feature's inputs — don't work around it by modifying dependent downstream features.

Question 8

An upstream Extrude was intentionally changed from a rectangular shape to a tapered shape. A downstream Fillet fails because its originally selected edge no longer exists, but the modified body has a new edge that should receive the same radius.

What is the most appropriate repair?

  1. Edit the Fillet, remove the missing edge reference, and select the new corresponding edge. (correct answer)
  2. Edit the Extrude and restore its rectangular shape so the original edge identifier returns.
  3. Create a second Fillet at the end of the timeline while leaving the failed Fillet unchanged.
  4. Change the failed Fillet to a Chamfer and use the same missing edge reference.
Explanation: When working in Fusion 360's parametric timeline, features downstream of a modified feature can break when their referenced geometry — edges, faces, or vertices — no longer exists after the upstream change. This is called a broken reference, and knowing how to repair it efficiently is essential for maintaining a clean, editable design history. The right approach here is A: edit the failed Fillet, remove the stale edge reference, and reselect the new corresponding edge on the modified body. This preserves the design intent (a filleted edge on that region of the body), keeps the timeline intact, and respects the intentional upstream change to the Extrude. Fusion 360 allows you to re-enter a failed feature's dialog and update its inputs — this is exactly the workflow it's designed for. B is a step backward. Reverting the Extrude to its original rectangular shape just to satisfy a downstream feature defeats the purpose of the intentional design change and sacrifices the updated geometry. You'd be letting a repair drive the design rather than the other way around. C is redundant and messy. Adding a second Fillet at the end of the timeline leaves the broken feature sitting in the history unresolved, which clutters the timeline and can cause further downstream confusion or errors. D is illogical on two levels: switching to a Chamfer changes the design intent, and referencing the missing edge still leaves the geometry reference broken — it doesn't solve the underlying problem. As a study tip: whenever a downstream feature fails in Fusion 360, your first instinct should be edit and re-reference, not workaround or revert.

Question 9

A body is used as a tool in two Combine features. An edit to the first Combine cleared Keep Tools, causing that operation to consume the tool body. The second Combine now fails because the same tool body is unavailable.

How should the model be repaired if both Combine operations are still required?

  1. Edit the second Combine and select the result body from the first Combine as its tool.
  2. Enable Keep Tools in the first Combine, then allow the second Combine to recompute. (correct answer)
  3. Change the second Combine from Cut to Join so it no longer needs the missing body.
  4. Suppress the first Combine and recreate both operations after the final timeline feature.
Explanation: Whenever you see a question about Fusion 360's timeline and Combine features, think about how tool bodies are consumed versus preserved — this is the heart of non-destructive parametric modeling. The Keep Tools option in a Combine feature tells Fusion 360 to retain the tool body after the operation, making it available for downstream features that reference the same body. In this scenario, disabling Keep Tools in the first Combine caused it to consume the tool body entirely, leaving the second Combine with nothing to reference. The fix is straightforward: re-enable Keep Tools in the first Combine. When the timeline recomputes, the tool body survives the first operation and remains available for the second Combine to use normally. This is exactly what B describes — a clean, minimal repair that restores the intended behavior without restructuring the model. A is tempting but misunderstands the situation. The result body from the first Combine is a different body than the original tool; substituting it would change the geometry and intent of the second operation. C sidesteps the problem rather than solving it — changing the operation type from Cut to Join alters the design intent entirely and doesn't actually repair the workflow; it just avoids the error by abandoning the original requirement. D is unnecessarily destructive. Suppressing the first Combine and rebuilding both operations from scratch ignores the simpler, parametric solution already available in the timeline. As a study tip, remember that most timeline repair questions in Fusion 360 favor the least invasive fix — edit the upstream feature rather than restructuring downstream ones.

Question 10

A Mirror feature has lost its custom construction plane because that plane was deleted. No existing origin plane or planar face has the required orientation. Several later features depend on the mirrored geometry.

Which sequence can repair the Mirror without forcing it to reference geometry created later in the timeline?

  1. Create a replacement plane at the timeline end, then edit the earlier Mirror to select it.
  2. Move the timeline marker before the Mirror, create a replacement plane, and assign it to the Mirror. (correct answer)
  3. Edit the Mirror to use any origin plane, then rotate the completed body into the required orientation.
  4. Suppress the Mirror, finish all later features, and create replacement mirrored bodies at the end.
Explanation: Whenever you see a question about repairing broken feature references in Fusion 360, think carefully about timeline order. Fusion 360's parametric timeline is sequential — features can only reference geometry that exists earlier in the timeline. A Mirror feature cannot legally point to a plane created after it without breaking the parametric chain. The correct approach, B, exploits the timeline marker. By dragging the marker to a point just before the broken Mirror feature, you enter a "past" state of the model. Any construction plane you create there gets inserted at that position in the timeline — meaning it exists before the Mirror and can be cleanly assigned as its mirror plane. When you roll the timeline forward, all dependent features rebuild correctly on top of the repaired Mirror. This preserves the full downstream history without restructuring anything. A fails because creating the replacement plane at the timeline end places it after the Mirror chronologically. Editing the Mirror to select it would create a forward reference, which Fusion 360 won't allow — features cannot depend on geometry born later in the sequence. C is flawed in both logic and workflow. Rotating a completed body is a brute-force workaround that abandons parametric intent, and it would misalign all subsequent features that were built on the original geometry. D suppresses the Mirror entirely and recreates mirrored bodies at the end, discarding the parametric Mirror relationship altogether. This destroys editability and forces you to manually redo any dependent features. Your key takeaway: always roll back the timeline marker before inserting repair geometry — Fusion 360's parametric rules require that references only point backward in time.