01 / 20

Unit
Conversions

Master the art of converting between units: from dimensional analysis to real-world PSAT problems using conversion factors.

PSAT Math

What Is a Unit Conversion?

A unit conversion changes a quantity from one unit of measurement to another without changing its actual value. You do this by multiplying by a conversion factor: a fraction that equals \(1\).

Why Units Matter on the PSAT

Word Problems
Many PSAT questions give data in one unit and ask for the answer in another.
Rate Problems
Speed, density, and cost-per-unit all require converting compound units.
Trap Answers
Wrong-unit answers are always among the choices: the test exploits skipped conversions.

The Conversion Factor

A conversion factor is a ratio of two equivalent measurements. Because the numerator and denominator represent the same quantity, the fraction equals \(1\).

\(12\text{ in}\)
\(1\text{ ft}\)
\(= 1\)
\(1\text{ ft}\)
\(12\text{ in}\)

Dimensional Analysis: The Big Idea

Dimensional analysis (also called the factor-label method) is a systematic way to convert units. You chain conversion factors so that unwanted units cancel, leaving only the desired unit.

Given Value
\(\times\)
desired unit given unit
\(=\)
Answer (desired unit)

Common Conversion Factors

Category Equivalence Factor
Length \(1\text{ ft} = 12\text{ in}\) \(\frac{12\text{ in}}{1\text{ ft}}\)
Length \(1\text{ mi} = 5{,}280\text{ ft}\) \(\frac{5{,}280\text{ ft}}{1\text{ mi}}\)
Time \(1\text{ hr} = 60\text{ min}\) \(\frac{60\text{ min}}{1\text{ hr}}\)
Mass \(1\text{ kg} = 1{,}000\text{ g}\) \(\frac{1{,}000\text{ g}}{1\text{ kg}}\)
Volume \(1\text{ gal} = 4\text{ qt}\) \(\frac{4\text{ qt}}{1\text{ gal}}\)

Single-Step vs Multi-Step Conversions

Single-Step
One conversion factor bridges the two units directly. Example: inches to feet.
Multi-Step
No single factor connects the units, so you chain two or more. Example: miles per hour to feet per second.

Step-by-Step Method

1
Identify units: Write the starting unit and the target unit.
2
Find conversion factors: List equivalences that bridge starting to target (the PSAT always provides non-standard ones).
3
Orient each factor: Place the unit you want to cancel in the position opposite to where it currently appears.
4
Cancel and compute: Cross out matching units, then multiply/divide the numbers.
5
Check the answer: Verify the surviving unit matches the target and the magnitude makes sense.

Example 1: Single-Step

Problem: A table is \(36\) inches long. What is its length in feet?

\(36\text{ in}\)
\(\times\)
\(1\text{ ft}\)
\(12\text{ in}\)
\(=\)
\(3\text{ ft}\)

Example 2: Multi-Step

Problem: Convert \(90\) miles per hour to feet per second.

\(90\text{ mi}\)
\(1\text{ hr}\)
\(\times\)
\(5,280\text{ ft}\)
\(1\text{ mi}\)
\(\times\)
\(1\text{ hr}\)
\(60\text{ min}\)
\(\times\)
\(1\text{ min}\)
\(60\text{ sec}\)
\(=\)
\(132\text{ ft/s}\)

Example 3: PSAT-Style Problem

Problem: A machine produces \(240\) widgets per hour. Each widget weighs \(0.5\) kilograms. How many grams of widgets does the machine produce per minute?

1
Start: \(240\;\frac{\text{widgets}}{\text{hr}}\)
2
Convert widgets to kg: Multiply by \(\frac{0.5\text{ kg}}{1\text{ widget}}\) → \(120\;\frac{\text{kg}}{\text{hr}}\)
3
Convert kg to g: Multiply by \(\frac{1{,}000\text{ g}}{1\text{ kg}}\) → \(120{,}000\;\frac{\text{g}}{\text{hr}}\)
4
Convert hr to min: Multiply by \(\frac{1\text{ hr}}{60\text{ min}}\) → \(2{,}000\;\frac{\text{g}}{\text{min}}\)

Squared and Cubed Units

When converting area (\(\text{ft}^2\)) or volume (\(\text{ft}^3\)), you must apply the conversion factor for each dimension. A single linear factor is not enough.

Area
\(1\text{ ft}^2 = 12^2 = 144\text{ in}^2\). Square the linear factor.
Volume
\(1\text{ ft}^3 = 12^3 = 1{,}728\text{ in}^3\). Cube the linear factor.

Alternative: The Proportion Method

Some students prefer setting up a proportion instead of multiplying by conversion factors. Both methods give the same answer.

\(12\text{ in}\)
\(1\text{ ft}\)
\(=\)
\(36\text{ in}\)
\(x\text{ ft}\)

Common Mistakes

✕ Flipping the Factor Wrong
Placing the unit you want to keep in the denominator, causing it to cancel instead of survive.
✕ Forgetting to Square/Cube
Using a linear factor (\(\times 12\)) for an area conversion instead of squaring it (\(\times 144\)).
✕ Mixing Up Systems
Confusing metric prefixes (kilo vs milli) or imperial equivalences (quarts vs pints vs gallons).

Quick Reference Summary

Scenario Method Watch Out For
Single unit, one step One conversion factor Factor orientation
Single unit, multi-step Chain factors Missing a link in the chain
Compound units (rates) Convert numerator and denominator separately Forgetting to convert both parts
Area / Volume Square / Cube the linear factor Using the linear factor only

Question 1 of 5

A car travels at \(60\) miles per hour. How many feet per minute is this?
(\(1\text{ mile} = 5{,}280\text{ feet}\))

Question 2 of 5

A rectangular garden has an area of \(3\) square yards. What is this area in square feet?
(\(1\text{ yard} = 3\text{ feet}\))

Question 3 of 5

A factory uses \(4{,}500\) grams of material per hour. How many kilograms per minute does it use?

Question 4 of 5

If a tank holds \(2\) cubic feet of water, how many cubic inches is that?
(\(1\text{ ft} = 12\text{ in}\))

Question 5 of 5

A printer outputs \(15\) pages per minute. A ream contains \(500\) pages. How many hours does it take to print \(6\) reams?