01 / 20

Mastering Rates

Learn to interpret, set up, and solve rate problems that appear throughout the PSAT: from unit rates to combined work and speed.

PSAT Math

What Is a Rate?

A rate compares two quantities measured in different units. Whenever you see "per," "each," or "for every," you are looking at a rate.

Rates show up everywhere on the PSAT: in word problems about speed, pricing, work, and data interpretation.

The Unit Rate

A unit rate expresses how much of one quantity corresponds to exactly one unit of the other quantity.

240 miles 4 hours ÷ 4 60 miles 1 hour
\(\text{Unit Rate} = 60 \text{ mph}\)

Rates and Slope

On the PSAT, a constant rate produces a linear relationship. The rate is the slope of the line.

\(\text{Time (hours)}\)
\(\text{Distance (mi)}\)
0 1 2 3 4 0 60 120 180 240
\(+1 \text{ hr}\)
\(+60 \text{ mi}\)

The Core Rate Formula

Amount Rate Time ×
\(A = R \times T\)
\(R = \dfrac{A}{T}\)
\(T = \dfrac{A}{R}\)

Rate vs. Ratio vs. Proportion

Rate
Compares quantities with different units: \(\dfrac{120\text{ mi}}{2\text{ hr}}\)
Ratio
Compares quantities with the same units or no units: \(3 : 5\)
Proportion
An equation stating two rates or ratios are equal: \(\dfrac{a}{b} = \dfrac{c}{d}\)

How to Solve Rate Problems

1
Identify the rate, amount, and time. Read carefully: what is "per" what?
2
Write the relationship. Use \(\text{Amount} = \text{Rate} \times \text{Time}\) or set up a proportion.
3
Check your units. Make sure units cancel correctly: hours with hours, miles with miles.
4
Solve for the unknown. Cross-multiply if using a proportion; isolate the variable.
5
Verify reasonableness. Does your answer make sense in context?

Example 1: Basic Speed

A car travels 195 miles in 3 hours. What is the car's average speed in miles per hour?

Start End
\(195 \text{ miles}\)
\(3 \text{ hours}\)

Example 2: Proportion Setup

A printer produces 120 pages in 8 minutes. At this rate, how many pages does it produce in 30 minutes?

1
Set up the proportion: \(\dfrac{120 \text{ pages}}{8 \text{ min}} = \dfrac{x \text{ pages}}{30 \text{ min}}\)
2
Cross-multiply: \(120 \times 30 = 8x\) → \(3600 = 8x\)
3
Solve: \(x = \dfrac{3600}{8} = \) \(450 \text{ pages}\)

Example 3: Combined Rates

Pipe A fills a tank in 6 hours. Pipe B fills the same tank in 4 hours. How long does it take both pipes working together?

1
Convert to rates: Pipe A: \(\dfrac{1}{6}\) tank/hr, Pipe B: \(\dfrac{1}{4}\) tank/hr
2
Add the rates: \(\dfrac{1}{6} + \dfrac{1}{4} = \dfrac{2}{12} + \dfrac{3}{12} = \dfrac{5}{12}\) tank/hr
3
Time = reciprocal: \(T = \dfrac{1}{\frac{5}{12}} = \dfrac{12}{5} = \) \(2.4 \text{ hours}\) (2 hr 24 min)

Example 4: Average Speed Trap

A cyclist rides 30 miles at 10 mph, then rides 30 miles at 15 mph. What is the average speed for the entire trip?

1
Find each time: \(t_1 = \dfrac{30}{10} = 3\) hr, \(t_2 = \dfrac{30}{15} = 2\) hr
2
Total distance: \(30 + 30 = 60\) miles. Total time: \(3 + 2 = 5\) hours.
3
Average speed: \(\dfrac{60}{5} = \) \(12 \text{ mph}\) (not \(\dfrac{10+15}{2} = 12.5\) !)

Unit Conversion with Rates

Many PSAT rate problems require converting between units. Use dimensional analysis: multiply by conversion fractions so unwanted units cancel.

\(\dfrac{\color{#e2e8f0}60 \text{ mi}}{\color{#fbbf24}1 \text{ hr}}\)
×
\(\dfrac{\color{#4ade80}5280 \text{ ft}}{\color{#e2e8f0}1 \text{ mi}}\)
×
\(\dfrac{\color{#e2e8f0}1 \text{ hr}}{\color{#f87171}3600 \text{ sec}}\)
=
\(\dfrac{\color{#4ade80}88 \text{ ft}}{\color{#4ade80}1 \text{ sec}}\)

Reading Rates from Tables

The PSAT often gives data in a table and asks you to find or compare rates. The rate is the change in the output divided by the change in the input.

Time (hr) Distance (mi) Rate (mi/hr)
0 → 1 0 → 50 50
1 → 3 50 → 170 60
3 → 5 170 → 280 55

Common Mistakes to Avoid

✕ Averaging Speeds
Don't average two speeds directly. Use \(\frac{\text{total distance}}{\text{total time}}\) for average speed.
✕ Unit Mismatch
Mixing minutes with hours or feet with miles. Always convert units before computing.
✕ Flipping the Rate
Writing \(\frac{\text{time}}{\text{distance}}\) instead of \(\frac{\text{distance}}{\text{time}}\). Read the problem for which quantity is "per" which.

Rate Problem Summary

Problem Type Formula Key Tip
Basic Rate \(A = R \times T\) Identify the "per" unit
Unit Rate \(\frac{A}{T}\) or \(\frac{A}{Q}\) Divide to get per-one
Proportion \(\frac{a}{b} = \frac{c}{d}\) Cross-multiply
Combined Work \(\frac{1}{T} = \frac{1}{T_A} + \frac{1}{T_B}\) Add the individual rates
Average Speed \(\frac{\text{total dist}}{\text{total time}}\) Never average the speeds

Question 1 of 5

A factory produces 540 widgets in 9 hours. At this rate, how many widgets are produced in 15 hours?

Question 2 of 5

Machine A can fill an order in 10 hours. Machine B can fill the same order in 15 hours. Working together, how many hours will it take?

Question 3 of 5

A car drives 100 miles at 50 mph and then 100 miles at 25 mph. What is the average speed for the entire trip?

Question 4 of 5

If a hose fills a pool at a rate of 3 gallons per minute, how many minutes will it take to fill a 1,800-gallon pool?

Question 5 of 5

A runner's pace is 8 minutes per mile. What is the runner's speed in miles per hour?