01 / 20

Safety & Risk
Management

Strategies to protect the patient, the practitioner, and the environment throughout physical therapy care.

NPTE

What Is Risk Management?

In physical therapy, risk management is the proactive process of identifying, evaluating, and reducing hazards that could harm patients, clinicians, or the clinical environment.

Three Domains of Safety

Patient
Fall prevention, vital-sign monitoring, infection control, correct identification.
Practitioner
Body mechanics, PPE use, sharps handling, exposure prevention.
Environment
Clear walkways, equipment maintenance, spill control, emergency access.

The Risk Matrix

Likelihood → Severity → Low Moderate High

Hierarchy of Controls

Elimination Engineering Administrative PPE Most effective Least

The Risk-Reduction Principle

If a fall-risk control reduces likelihood by 80%, then \( E = 0.8 \) and residual risk drops to \( 0.2 \times R_{\text{initial}} \). Higher \( E \) means safer practice. The clinician's duty is to reach the lowest reasonably practicable residual risk.

Hazard vs. Risk

Hazard
A source of potential harm — a wet floor, a frayed cord, an unstable transfer surface.
Risk
The chance and consequence of that hazard causing harm to a person.

Applying a Safety Workflow

1
Identify hazards before and during the session.
2
Assess risk using likelihood and severity.
3
Control using the highest practical level of the hierarchy.
4
Monitor patient response and re-check the environment.
5
Document & report incidents and near-misses.

Example 1: Fall Prevention

A post-stroke patient with impaired balance is starting gait training. Likelihood of a fall is high and severity could be a fracture.

Example 2: Practitioner Injury

A therapist must transfer a dependent patient from bed to chair. Repeated manual lifting risks a back injury — a high-severity, high-likelihood hazard for the clinician.

Example 3: Vital-Sign Red Flag

During exercise, a patient's resting heart rate climbs and they report chest tightness with \( \text{RPE} = 8/10 \). This signals an unsafe physiologic response.

Common Mistakes

✕ Relying on PPE first
Reaching for the weakest control before trying elimination or engineering options.
✕ Ignoring near-misses
Failing to report events that did not cause harm but reveal real hazards.
✕ Pushing through red flags
Continuing activity despite abnormal vitals or symptoms to hit session goals.
✕ Skipping documentation
Not recording incidents, removing the chance to prevent recurrence.

Controls Summary

Example Effectiveness
EliminationRemove a tripping hazardHighest
EngineeringMechanical lift, rampsHigh
AdministrativeProtocols, training, signageModerate
PPEGloves, gowns, masksLowest

Question 1 of 5

Which control is considered the most effective in the hierarchy of controls?

Question 2 of 5

A control reduces fall likelihood by 60%, so \( E = 0.6 \). What is the residual risk relative to initial risk?

Question 3 of 5

A patient develops chest tightness and abnormal vitals during exercise. What is the most appropriate first action?

Question 4 of 5

Which best describes the difference between a hazard and a risk?

Question 5 of 5

For transferring a fully dependent patient, which option is the highest-tier control to prevent practitioner injury?