01 / 20

Waves at
Boundaries

Discover what happens when waves meet the edge between two different materials: they reflect, transmit, and sometimes absorb.

Physical Science

What Is a Wave?

A wave is a disturbance that transfers energy from one place to another without permanently moving the material it travels through. Waves carry energy through vibrations in a medium (like water, air, or a rope) or even through empty space (like light).

\( A \)
\( \lambda \) (wavelength)
Direction of energy transfer →

What Is a Boundary?

A boundary is the surface or interface where one material (medium) ends and another begins. When a wave reaches a boundary, its behavior changes because the two materials have different properties.

Medium 1 (e.g., air) Medium 2 (e.g., water) Boundary

Why Do Boundaries Matter?

Boundaries are everywhere in the real world. Understanding wave behavior at boundaries helps us explain everyday phenomena and design useful technology.

Echoes
Sound waves reflect off walls and cliffs, creating echoes you can hear.
Seeing Objects
Light reflects off objects and enters your eyes: that is how you see.
Soundproofing
Special materials absorb sound waves at boundaries, keeping rooms quiet.

The Three Boundary Behaviors

Boundary Incident Wave Reflected Wave Transmitted Wave Some energy absorbed at boundary
Reflection
Wave bounces back into the original medium.
Transmission
Wave passes through into the new medium.
Absorption
Wave energy is converted to heat inside the boundary material.

Energy Is Always Conserved

When a wave hits a boundary, the total energy of the incoming wave is split. No energy is created or destroyed: it is only redistributed among the three behaviors.

100% Incident = 40% Reflected + 35% Transmitted + 25% Absorbed

Reflection vs Transmission

These two behaviors are often confused. The key difference is which side of the boundary the wave energy ends up on.

Reflection Transmission
Direction Wave bounces back Wave passes through
Medium after Same as original New medium
Speed change? No Yes (if media differ)
Wavelength change? No Yes (if speed changes)
Frequency change? No No

What Controls the Split?

How much energy is reflected vs transmitted depends on how different the two media are. The bigger the contrast, the more reflection occurs.

1
Density difference: A wave going from air into concrete (very different) reflects more than air into helium (similar).
2
Stiffness difference: A wave on a thin rope hitting a thick rope reflects more than hitting a slightly thicker rope.
3
Angle of arrival: The angle at which a wave hits the boundary also affects how much is reflected.

How to Analyze Wave Boundaries

1
Identify the two media: What material is the wave in now? What material is on the other side?
2
Compare properties: Are the media very different (like air and steel) or similar (like warm water and cool water)?
3
Predict the split: More different → more reflection. More similar → more transmission.
4
Check frequency: Frequency never changes. If speed changes, wavelength must also change.
5
Account for absorption: Some energy may be converted to heat, especially in soft or thick materials.

Example 1: Sound Hits a Brick Wall

Air Brick Wall Incident sound Strong reflection (echo) Weak transmission

Example 2: Light Enters Water

Air Water Boundary normal Incident Reflected Transmitted (refracted)

Example 3: Pulse on a Rope

Thin rope Thick rope Junction Incoming pulse Reflected (inverted) Transmitted (smaller)

Inverted vs Upright Reflection

Light → Heavy Inverted Heavy → Light Upright Less dense → More dense Reflected pulse is INVERTED Transmitted pulse is smaller More dense → Less dense Reflected pulse is UPRIGHT Transmitted pulse is larger

Speed and Wavelength Changes

When a wave is transmitted into a new medium, its speed changes. Since frequency is constant, the wavelength must also change. The wave equation connects all three:

Boundary Fast medium Long wavelength Slow medium Short wavelength

Common Mistakes

✕ Frequency changes at a boundary
Frequency never changes when a wave crosses a boundary. Only speed and wavelength can change.
✕ All energy is reflected OR transmitted
Energy is always split among reflection, transmission, and absorption. It is rarely 100% one behavior.
✕ Reflected waves always look the same
Reflected pulses can be inverted (flipped) when going from a less dense to a more dense medium.

Summary: Waves at Boundaries

Property Incident Reflected Transmitted
Direction Toward boundary Away (same side) Through (other side)
Speed Original Same as original May change
Frequency Original Same Same
Wavelength Original Same Changes with speed
Amplitude Original Reduced Reduced
Orientation Original May invert Always upright

Question 1 of 5

When a sound wave travels from air into water, which property of the wave stays the same?

Question 2 of 5

A wave pulse travels along a thin rope and hits a junction where it connects to a much thicker rope. The reflected pulse will be:

Question 3 of 5

A wave enters a new medium where it travels more slowly. What happens to its wavelength?

Question 4 of 5

You shout toward a large cliff and hear an echo. Which wave behavior primarily explains the echo?

Question 5 of 5

Two media are very similar in density and stiffness. When a wave crosses the boundary between them, you would expect: