01 / 20

Reflection, Absorption
& Transmission

Discover what happens when a wave meets a new material: it can bounce back, be soaked up, or pass through.

Physical Science

What Are Waves?

A wave is a disturbance that transfers energy from one place to another without permanently moving matter. Think of ripples spreading across a pond: the water bobs up and down, but it does not travel with the wave.

Amplitude Wavelength Direction →

Three Behaviors of Waves

Reflection
The wave bounces back off a surface, like light in a mirror or sound echoing off a canyon wall.
Absorption
The wave's energy is taken in by the material and converted to another form, often heat.
Transmission
The wave passes through the material and continues traveling on the other side.

Understanding Reflection

Normal Incident Wave Reflected Wave
\(\theta_i\)
\(\theta_r\)

Examples: a mirror reflecting light, a canyon wall creating an echo, radar waves bouncing off an airplane.

Understanding Absorption

Material Incoming Wave Energy → Heat No wave passes through (fully absorbed)

Key idea: The wave does not bounce back or pass through: its energy stays in the material.

Understanding Transmission

Glass Incoming Light Transmitted Light

Transmitted waves may change speed or direction (that is refraction), but the key point is that the energy continues forward.

The Energy Rule

Boundary Incident Reflected Absorbed Transmitted

No energy disappears: it is only redistributed. The proportions depend on the material, the wave type, and the wave's frequency.

What Determines the Split?

1
Material properties: Metals are highly reflective, dark fabrics absorb well, clear glass transmits light.
2
Wave type: Sound, light, and X-rays each interact differently with the same material.
3
Frequency (color for light): Red glass transmits red light but absorbs blue and green.
4
Angle of incidence: A wave hitting at a steep angle may reflect more than one hitting straight on.
5
Thickness of material: A thicker wall absorbs more sound than a thin one.

Comparing All Three

Feature Reflection Absorption Transmission
Wave direction Bounces back Stops Continues forward
Energy goes to Back to source side Material (heat) Through material
Light example Mirror Black shirt Clear window
Sound example Echo off cliff Carpet, curtains Thin wall
Surface needed Smooth, shiny Rough, dark, soft Transparent, thin

How to Identify Each Behavior

1
Ask: Does the wave bounce back? If yes, that is reflection.
2
Ask: Does the wave disappear and the material warm up or vibrate? If yes, that is absorption.
3
Ask: Does the wave come out the other side? If yes, that is transmission.
4
Remember: Most real scenarios involve a combination. Identify the dominant behavior.

Example 1: Flashlight on a Mirror

Mirror Light Reflected beam ~0% transmitted ~95% reflected ~5% absorbed

Example 2: Sunlight on a Black T-Shirt

Sun Black Shirt ↑ ↑ ↑ Heat rises ~95% absorbed ~5% reflected ~0% transmitted

Example 3: Sound Through a Wall

Thin Wall Speaker ~20% reflected ~30% absorbed Ear ~50% transmitted

Example 4: Sunglasses

Tinted sunglasses demonstrate all three behaviors at once. When sunlight hits the lens:

Reflected: ~8%
A small glare reflects off the lens surface (especially visible from the outside).
Absorbed: ~50%
The tint and UV coating absorb harmful ultraviolet rays and excess brightness.
Transmitted: ~42%
Enough visible light passes through so you can still see clearly.

Common Mistakes

✕ Thinking only one behavior happens
In reality, all three behaviors occur simultaneously. One usually dominates, but the others are still present.
✕ Confusing absorption with destruction
Energy is never destroyed: absorbed wave energy is converted to heat or another form, not eliminated.
✕ Mixing up transmission and refraction
Transmission means passing through. Refraction is a change in direction during transmission: they are related but not identical.

Summary Table

Scenario Reflection Absorption Transmission
Mirror + light High Low Very low
Black fabric + light Very low High Very low
Clear glass + light Low Low High
Carpet + sound Low High Low
Thin wall + sound Low Medium Medium-High
Metal wall + sound High Low Very low

Question 1 of 5

A student shines a flashlight at a clear glass window. Most of the light passes through to the other side. Which wave behavior is dominant?

Question 2 of 5

A person wearing a black jacket stands in the sun and feels warm. The warmth is caused by the jacket doing what to the sunlight?

Question 3 of 5

An echo in a canyon is an example of which wave behavior?

Question 4 of 5

When a wave hits a boundary, the total energy of the wave is:

Question 5 of 5

A recording studio uses thick foam panels on the walls to reduce echoes. The foam panels primarily: