01 / 20

Reduce Collision
Effects

Learn how to design solutions that reduce or change the effects of collisions by understanding force, momentum, and energy transfer.

Physical Science

What Is a Collision?

A collision occurs when two or more objects come into contact with each other and exert forces on one another. During a collision, energy is transferred between the objects, and each object's motion can change dramatically.

A v B v Contact Point

Force in Collisions

During a collision, objects exert forces on each other. The amount of force depends on two things: how fast the objects are moving and how quickly they stop. Newton's Second Law tells us:

A heavier object or a faster stop produces a larger collision force. Reducing that force is the key to reducing collision damage.

Understanding Momentum

Momentum is a measure of how hard it is to stop a moving object. It depends on both the object's mass and its velocity:

Low Momentum
A slow-moving tennis ball has small mass and low speed: easy to stop, low collision force.
High Momentum
A fast-moving truck has large mass and high speed: very hard to stop, enormous collision force.

The Impulse-Momentum Connection

The impulse-momentum theorem is the core rule for understanding how to reduce collision effects:

Time Force High Force Short time Low Force Long time Same area Same area

Two Strategies to Reduce Collision Effects

Increase Collision Time
Spread the force over a longer time so the peak force is lower. Examples: airbags, crumple zones, padding.
Absorb or Redirect Energy
Convert kinetic energy into other forms (heat, deformation) or redirect the object's path. Examples: helmets, bumpers, guardrails.

Energy Transfer in Collisions

During a collision, kinetic energy (energy of motion) is transferred and transformed. The total energy is always conserved, but it can change form:

Kinetic Energy
\( KE = \frac{1}{2}mv^2 \)
Energy of a moving object.
Heat Energy
Friction during impact converts kinetic energy into thermal energy.
Deformation Energy
Objects crumple, bend, or break, absorbing energy in the process.

Designing a Safety Solution

1
Identify the collision. What objects are colliding? What are their masses and speeds?
2
Calculate the momentum. Use \( p = m \times v \) to find the momentum that must change during the collision.
3
Choose a strategy. Increase the collision time (\( \Delta t \)) or absorb/redirect kinetic energy.
4
Select materials. Use soft, crushable, or elastic materials that deform and absorb energy.
5
Test and refine. Does your solution reduce the force? Measure, improve, repeat.

Example 1: Crumple Zones

CZ Passengers Before Impact CZ Safe! After Impact Crumple zone absorbs energy Passengers experience less force

Example 2: Bicycle Helmet

Without Helmet Head High Force Short time With Helmet Head Foam padding Low Force Longer time

Example 3: Egg Drop Challenge

You must design a container that protects an egg dropped from 2 meters. The egg has a mass of 0.06 kg and hits the ground at about 6.3 m/s.

Real-World Safety Devices

Airbags
Inflate on impact, creating a soft cushion that increases the time your body decelerates.
Seatbelts
Stretch slightly to slow you down over a longer time instead of slamming into the dashboard.
Guardrails
Bend and flex on impact, absorbing energy and redirecting the vehicle away from the hazard.
Bumpers
Deform during low-speed collisions, absorbing energy so the rest of the car stays intact.
Padding
Gym mats, knee pads, and phone cases all compress to extend impact time and lower force.

Elastic vs. Inelastic Collisions

Elastic Inelastic
Kinetic Energy Conserved Not conserved
Momentum Conserved Conserved
Objects After Bounce apart May stick together or deform
Real Example Pool balls bouncing Car crash with crumpling
Safety Relevance Energy stays as motion Energy absorbed as deformation

Newton's Third Law in Collisions

A B F(A on B) F(B on A) Equal magnitude, opposite direction

Common Mistakes

✕ Harder is Safer
Students think a rigid container protects better. In reality, rigid materials transfer force faster, increasing peak force. Soft, deformable materials are safer.
✕ Heavier Means More Force
Mass alone doesn't determine collision force. Force depends on the rate of momentum change (\( F = \Delta p / \Delta t \)), not just mass.
✕ Momentum is Destroyed
Momentum is always conserved in a collision. It transfers between objects but never disappears. Energy may change form, but momentum does not.

Summary: Reducing Collision Effects

Concept Formula How to Reduce Force
Newton's 2nd Law \( F = ma \) Decrease acceleration (decelerate slowly)
Momentum \( p = mv \) Reduce speed before impact
Impulse \( F \Delta t = \Delta p \) Increase collision time \( \Delta t \)
Kinetic Energy \( KE = \frac{1}{2}mv^2 \) Absorb energy through deformation
Newton's 3rd Law \( F_{AB} = -F_{BA} \) Both objects benefit from longer \( \Delta t \)

Question 1 of 5

A car's crumple zone reduces injury during a crash primarily by:

Question 2 of 5

An egg is dropped onto a pillow and doesn't break, but breaks when dropped from the same height onto concrete. What explains the difference?

Question 3 of 5

A 0.5 kg ball traveling at 10 m/s hits a wall and stops in 0.01 s. What is the average force on the ball?

Question 4 of 5

Which of the following is not an effective strategy for reducing collision effects?

Question 5 of 5

In a collision between a truck and a small car, Newton's Third Law tells us that: