01 / 20

Plan Temperature
Investigation

Learn to design a controlled experiment that isolates how mass or material type affects temperature change: \( \Delta T = T_f - T_i \)

Middle School Physical Science

What Is Temperature Change?

Temperature change measures how much hotter or cooler a substance gets during an experiment. We write it as:

A positive \( \Delta T \) means the substance got warmer. A negative \( \Delta T \) means it got cooler. The size of \( \Delta T \) depends on what you heat, how much of it there is, and how much energy you add.

Key Terms for Investigation Design

Independent Variable
The one factor you deliberately change (e.g., mass or material type).
Dependent Variable
The outcome you measure: the temperature change, \( \Delta T \).
Controlled Variables
Everything kept the same so the test is fair (e.g., heat source, time).

Why Isolation Matters

Uncontrolled 50 g Steel 100 g Wood Changed: mass AND material ✕ Can't tell which caused the temperature difference Controlled 50 g Steel 50 g Wood Changed: material only Kept same: mass = 50 g ✓ Difference is due to material

If you change two things at once, you cannot know which one caused the result. Isolation means one change, one test.

The Fair Test Rule

Independent Variable Experiment Controls held constant time, heat, starting T Dependent
\( \Delta T \) measured

The Science Behind \( \Delta T \)

The relationship between heat energy, mass, material, and temperature change is described by:

\( Q \)
Heat energy added (Joules)
\( m \)
Mass of the substance (grams)
\( c \)
Specific heat capacity (depends on material)
\( \Delta T \)
Temperature change (\( ^\circ\text{C} \))

Rearranging: \( \Delta T = \dfrac{Q}{m \cdot c} \). This tells us \( \Delta T \) depends on mass and material type (through \( c \)).

Mass vs. Material Type

Investigating Mass Investigating Material
Independent Variable Mass (e.g., 50 g, 100 g, 150 g) Material (e.g., water, oil, sand)
Dependent Variable \( \Delta T \) \( \Delta T \)
Controlled Variables Same material, same heat, same time Same mass, same heat, same time
Expected Result More mass → smaller \( \Delta T \) Different materials → different \( \Delta T \)

How to Plan Your Investigation

1
Write a testable question. Example: "How does mass affect \( \Delta T \) when the same heat is applied?"
2
Identify your variables. Pick one independent variable; list all controls.
3
Choose at least 3 test values. For mass: 50 g, 100 g, 150 g. For material: water, oil, sand.
4
Design the procedure. Record \( T_i \), apply the same heat for the same duration, then record \( T_f \).
5
Repeat each trial. At least 3 repetitions to ensure reliability.

Example 1: Isolating Mass

Question: How does the mass of water affect its temperature change when heated for 5 minutes?

50 g Water Same flame 100 g Water Same flame 150 g Water Same flame Trial A Trial B Trial C Changed: Mass Controlled: Material Heat source Time (5 min) Starting temp

Example 1: Expected Results

Trial Mass \( T_i \) \( T_f \) \( \Delta T \)
A 50 g \( 20^\circ\text{C} \) \( 40^\circ\text{C} \) \( +20^\circ\text{C} \)
B 100 g \( 20^\circ\text{C} \) \( 30^\circ\text{C} \) \( +10^\circ\text{C} \)
C 150 g \( 20^\circ\text{C} \) \( 27^\circ\text{C} \) \( +7^\circ\text{C} \)

Example 2: Isolating Material Type

Question: How does the type of material affect \( \Delta T \) when 100 g samples are heated equally?

100 g Water Trial A 100 g Oil Trial B 100 g Sand Trial C Changed: Material Controlled: Mass (100 g) Heat source Time Starting temp

Example 2: Expected Results

Material Specific Heat \( c \) \( T_i \) \( T_f \) \( \Delta T \)
Water \( 4.18~\text{J/(g}\cdot^\circ\text{C)} \) \( 20^\circ\text{C} \) \( 26^\circ\text{C} \) \( +6^\circ\text{C} \)
Oil \( 2.0~\text{J/(g}\cdot^\circ\text{C)} \) \( 20^\circ\text{C} \) \( 32^\circ\text{C} \) \( +12^\circ\text{C} \)
Sand \( 0.84~\text{J/(g}\cdot^\circ\text{C)} \) \( 20^\circ\text{C} \) \( 50^\circ\text{C} \) \( +30^\circ\text{C} \)

Predicting Results with a Graph

A well-planned investigation includes predictions. Here is what we would expect if we tested three masses of water heated for 5 minutes:

Temperature Change (\( ^\circ\text{C} \))
Mass of Water (g) 0 5 10 15 20
\( +20^\circ\text{C} \)
50 g
\( +10^\circ\text{C} \)
100 g
\( +7^\circ\text{C} \)
150 g

Why Repeat Trials?

1
Reduce random error. A single measurement might be off due to drafts, thermometer lag, or timing differences.
2
Identify outliers. If one trial gives a wildly different result, you can spot and investigate it.
3
Calculate an average. The mean of 3+ trials is far more reliable than any single data point.

Common Mistakes to Avoid

✕ Changing Two Variables
Testing different masses and different materials at the same time makes results impossible to interpret.
✕ Different Starting Temps
If samples start at different temperatures, your \( \Delta T \) comparison is unfair. Always let samples reach the same \( T_i \).
✕ Only One Trial
A single trial can be misleading. Without repeats, you cannot distinguish real effects from random variation.

Investigation Planning Checklist

Planning Step What to Do Example
Testable Question Ask how one factor affects \( \Delta T \) "How does mass affect \( \Delta T \)?"
Independent Variable Choose mass OR material Mass: 50 g, 100 g, 150 g
Dependent Variable Measure \( \Delta T \) Record \( T_f - T_i \)
Controlled Variables Keep everything else the same Same material, heat, time, \( T_i \)
Repetition Run at least 3 trials per test value 3 trials for each mass tested

Question 1 of 5

A student wants to test how material type affects temperature change. Which setup correctly isolates the variable?

Question 2 of 5

In an investigation testing how mass affects \( \Delta T \), which is the dependent variable?

Question 3 of 5

A student heats 50 g, 100 g, and 200 g of water identically. The \( \Delta T \) values are \( 24^\circ\text{C} \), \( 12^\circ\text{C} \), and \( 6^\circ\text{C} \). What relationship does this show?

Question 4 of 5

Why is it important to repeat trials in a temperature investigation?

Question 5 of 5

A student tests three materials: water, oil, and sand. All samples are 100 g and heated for the same time. Sand has the highest \( \Delta T \). What does this tell us about sand's specific heat capacity \( c \)?