01 / 21

Evaluate Field
Investigations

Learn to assess the strengths and limitations of investigations designed to detect electric, magnetic, and gravitational fields.

Physical Science

What Is a Field?

A field is an invisible region around an object where a force can act on another object without direct contact. You cannot see, hear, or touch a field directly: you can only observe its effects on test objects placed inside it.

Gravitational
Surrounds any object with mass. Pulls other masses toward it.
Magnetic
Surrounds magnets and electric currents. Acts on magnetic materials.
Electric
Surrounds charged objects. Pushes or pulls other charges.

How Do We Detect Fields?

Since fields are invisible, scientists use test objects (also called probes) to reveal their presence. The test object experiences a force, and we measure or observe that force to map the field.

Source Field Lines Test Force (magnet, charge, or mass) (compass, charge, or small mass)

Why Evaluate Investigations?

Not all experiments are created equal. Some designs produce reliable, convincing evidence of a field, while others have flaws that weaken the conclusions. Evaluating an investigation means asking:

1
Does it actually detect the field? Is the test object appropriate for the type of field being studied?
2
Are variables controlled? Could something other than the field explain the results?
3
Is the evidence sufficient? Were enough measurements taken at multiple locations?
4
Is it repeatable? Could another scientist follow the same procedure and get the same results?

Strengths vs. Limitations

Every investigation has features that make it strong and features that limit what it can tell us. Scientists balance these when designing and evaluating experiments.

Strengths
Features that increase confidence in the results: controlled variables, repeated trials, appropriate test objects, quantitative data.
Limitations
Features that weaken the conclusions: uncontrolled variables, single measurements, wrong test objects, qualitative-only observations.

The Field Detection Framework

1. Identify the Field 2. Select Test Object 3. Control Variables 4. Collect Data at Multiple Points 5. Repeat Trials & Analyze Gravity? Magnetic? Electric? Compass, pendulum, pith ball, etc. Isolate field effect from other forces

Qualitative vs. Quantitative Evidence

When evaluating an investigation, one of the most important distinctions is the type of data collected. Both types are useful, but they have different strengths.

Qualitative Quantitative
Definition Descriptions, observations Numbers, measurements
Example "The compass needle moved" "Needle rotated 45°"
Strength Quick, easy to observe Precise, comparable
Limitation Subjective, hard to compare Needs instruments, more time
Field mapping? Shows direction only Shows direction and strength

How to Evaluate an Investigation

1
Identify the field type: Is the investigation targeting a gravitational, magnetic, or electric field?
2
Check the test object: Is it appropriate? A compass detects magnetic fields, not electric. A charged pith ball detects electric fields, not gravitational.
3
Look for controlled variables: Did they keep everything constant except the variable being tested? Wind, vibration, and nearby objects can create false results.
4
Assess data quality: Were multiple locations measured? Were trials repeated? Is data quantitative or only qualitative?
5
State strengths and limitations: Write what the investigation does well, and what could be improved or what it cannot tell us.

Example 1: Compass Near a Magnet

N S 5 cm 10 cm 15 cm Bar Magnet Compass positions (3 trials each)
Strengths
Correct test object (compass for magnetic field). Multiple distances measured. Trials repeated 3 times for reliability.
Limitations
Only qualitative data (direction, not field strength). Only 3 distances may not fully map the field.

Example 2: Detecting an Electric Field

Strengths
Appropriate test object (pith ball responds to electric fields). Observes attraction correctly.
Limitations
Only one distance tested: cannot map how the field changes. No repeated trials. Data is qualitative only. Did not control for air currents that could push the pith ball.

Example 3: Gravitational Field Near Earth

Strengths
Quantitative data (time, distance). Multiple trials (5 each). Calculates \( g \) mathematically. Uses two different masses to test if the field acts equally on both.
Limitations
Air resistance affects the foam ball differently than the steel ball: this is an uncontrolled variable. Human reaction time on the stopwatch adds error. Only tests at one height.

Variables That Matter

When evaluating a field investigation, always identify these three types of variables:

Independent
What the investigator deliberately changes: distance from source, number of magnets, amount of charge.
Dependent
What is measured or observed in response: compass deflection angle, force on test charge, fall time.
Controlled
What must stay the same to keep the test fair: temperature, same test object, no wind, same source strength.

Matching Test Objects to Fields

Using the wrong test object is one of the biggest weaknesses an investigation can have. Here is the correct match:

Field Type Correct Test Object Wrong Test Object
Magnetic Compass, iron filings Pith ball, pendulum
Electric Charged pith ball, electroscope Compass, spring scale
Gravitational Falling mass, pendulum, spring scale Compass, charged pith ball

Field Strength and Distance

A good investigation measures the field at multiple distances from the source. All three field types get weaker as distance increases:

Distance from source Field Strength Strong Weak

Common Mistakes in Evaluations

✕ Wrong Test Object
Using a compass to detect an electric field, or a charged object to detect gravity. Always match the probe to the field type.
✕ Ignoring Variables
Saying an investigation is "good" without checking whether variables like wind, temperature, or nearby sources were controlled.
✕ Confusing Strength with Limitation
"They only measured once" is a limitation, not a strength. "They repeated 5 trials" is a strength, not a limitation.

Summary: Evaluation Checklist

Evaluation Criterion Strong Evidence Weak Evidence
Test object Matches the field type Wrong type for the field
Variables Controlled carefully Uncontrolled or ignored
Measurements Multiple distances/points Single location only
Trials Repeated 3+ times Done once
Data type Quantitative (numbers) Qualitative only
Reproducibility Clear procedure others can follow Vague or incomplete steps

Question 1 of 5

A student uses a compass to investigate the area around a charged balloon. What is the biggest limitation of this investigation?

Question 2 of 5

A team measures a magnetic field at 6 different distances from a magnet and repeats each measurement 4 times. Which of the following is a strength of their investigation?

Question 3 of 5

Which limitation would most weaken her conclusion about the value of \( g \)?

Question 4 of 5

An investigation records that "iron filings form a pattern around a magnet." This data is best described as:

Question 5 of 5

Which statement best compares the two investigations?