01 / 20

Build and Test
Heat Devices

Learn to construct and test devices that reduce or increase thermal energy transfer using conduction, convection, and radiation.

Physical Science

What Is Thermal Energy?

Thermal energy is the total kinetic energy of all particles in a substance. The faster particles move, the more thermal energy the substance has. Temperature measures the average kinetic energy per particle.

Cold Object Slow particles Hot Object Fast particles Energy flows →

Three Methods of Heat Transfer

Conduction
Heat moves through direct contact between particles. Example: a metal spoon in hot soup gets warm.
Convection
Heat moves through fluid movement (liquids and gases). Example: warm air rises from a heater.
Radiation
Heat moves through electromagnetic waves with no medium needed. Example: sunlight warming your face.

Conductors vs Insulators

Whether your device speeds up or slows down heat transfer depends on the materials you choose. Conductors let heat flow easily; insulators resist the flow.

Conductors Metal (copper, aluminum) Steel, iron, silver Heat flows easily → High thermal conductivity Insulators Foam, wool, wood Air, plastic, rubber Heat blocked ✕ Low thermal conductivity

The Heat Transfer Equation

The amount of thermal energy gained or lost by a substance is described by:

\( Q \)
Thermal energy transferred (in Joules)
\( m \)
Mass of the substance (in grams or kg)
\( c \)
Specific heat capacity of the material
\( \Delta T \)
Change in temperature: \( T_{\text{final}} - T_{\text{initial}} \)

Visualizing \( Q = mc\Delta T \)

Water ( \( m \) grams ) Heat source adds \( Q \) Joules \( T_i \) \( T_f \) \( \Delta T \)

Reducing vs Increasing Transfer

Reduce Transfer Increase Transfer
Goal Keep temperature stable Change temperature quickly
Materials Foam, wool, air pockets Metal, water, dark surfaces
Design Thick layers, sealed gaps Thin walls, large surface area
Real Example Thermos, winter jacket Radiator, cooking pan
Effect on \( \Delta T \) Small \( \Delta T \) Large \( \Delta T \)

How to Build and Test Your Device

1
Define your goal: Are you reducing or increasing thermal energy transfer?
2
Choose materials: Insulators to reduce, conductors to increase. Consider all three transfer methods.
3
Build a prototype: Assemble your device with consistent dimensions. Include a control (no device).
4
Measure starting temperature: Record \( T_i \) of your hot or cold substance in both the device and control.
5
Record data over time: Measure temperature every 2-5 minutes for 20-30 minutes.
6
Calculate \( \Delta T \): Compare the temperature change of the device vs control. A smaller \( \Delta T \) means better insulation.

Example 1: Insulating Cup

A student wraps a foam sleeve around a cup of hot water (\( 80^\circ\text{C} \)). After 20 minutes, the water is at \( 65^\circ\text{C} \). A control cup (no sleeve) dropped to \( 50^\circ\text{C} \).

Control \( \Delta T = 30^\circ\text{C} \) Foam Insulated \( \Delta T = 15^\circ\text{C} \) Foam vs Foam reduced heat loss by 50%

Example 2: Solar Heater

A student builds a solar heater to increase thermal energy transfer into water. They use a black-painted metal container inside a box lined with aluminum foil, covered with clear plastic.

Aluminum foil lining Clear plastic cover Black metal container Water inside Radiation absorbed + reflected inward = increased \( \Delta T \)

Example 3: Comparing Materials

Three students each wrap a cup of \( 70^\circ\text{C} \) water with a different material. After 15 minutes, they measure the final temperature:

Material \( T_i \) \( T_f \) \( \Delta T \) Rank
Cotton cloth \( 70^\circ\text{C} \) \( 55^\circ\text{C} \) \( 15^\circ\text{C} \) 2nd
Foam wrap \( 70^\circ\text{C} \) \( 62^\circ\text{C} \) \( 8^\circ\text{C} \) 1st (best)
Aluminum foil \( 70^\circ\text{C} \) \( 48^\circ\text{C} \) \( 22^\circ\text{C} \) 3rd

Graphing Your Results

Plot temperature vs time for both your device and the control. The slopes of the curves show how fast heat is transferred.

40 50 60 70 80 90 0 5 10 15 20 25 Time (minutes) Temp (\(^\circ\text{C}\)) Control Insulated

Key Design Variables

When engineering your device, you can manipulate these variables to control heat transfer:

Material Type
Conductor vs insulator: metal transfers heat fast, foam blocks it.
Thickness
Thicker insulation layers slow heat transfer more than thin ones.
Surface Area
Larger exposed surfaces transfer more heat. Compact shapes retain heat better.
Color
Dark colors absorb radiation; light or reflective colors bounce it away.

Running a Fair Test

1
Independent variable: The one thing you change (e.g., insulation material).
2
Dependent variable: What you measure: temperature over time, \( \Delta T \).
3
Controlled variables: Keep the same: water volume, starting temperature, cup type, room conditions, measurement intervals.
4
Control group: A cup with no insulation or device, tested alongside your prototype.

Common Mistakes

✕ No Control Group
Testing only the insulated cup without a bare cup means you have no baseline for comparison.
✕ Unequal Volumes
Using different amounts of water in each cup changes \( m \) in \( Q = mc\Delta T \), making the comparison unfair.
✕ Ignoring Convection
Leaving the top of the cup open lets warm air escape via convection, even if the sides are well insulated.

Summary: Transfer Methods and Solutions

Transfer Type To Reduce To Increase
Conduction Use foam, wood, plastic Use metal, direct contact
Convection Seal gaps, add lids Open vents, use fans
Radiation Reflective surfaces (foil) Dark or matte surfaces
Measurement Use \( \Delta T \) to compare device vs control over time

Question 1 of 5

A student wants to keep ice water cold for as long as possible. Which material should they wrap around the cup?

Question 2 of 5

In the equation \( Q = mc\Delta T \), what does a smaller \( \Delta T \) after 20 minutes indicate about an insulating device?

Question 3 of 5

A solar heater uses a black-painted metal container inside a foil-lined box. Why is the container painted black?

Question 4 of 5

A student tests two insulated cups but uses 200 mL of water in one and 400 mL in the other. Why is this a problem?

Question 5 of 5

Which combination of design features would best reduce thermal energy transfer from a hot liquid?