01 / 20

Thermodynamics &
Energy Changes

Master the laws governing energy transfer, enthalpy, entropy, and Gibbs free energy for the MCAT Chemical and Physical Foundations section.

MCAT Chem/Phys

What is Thermodynamics?

Thermodynamics is the study of energy transformations in chemical and physical processes. It tells us whether a reaction will proceed spontaneously, how much heat is released or absorbed, and why living systems obey the same physical laws as engines.

System
The part of the universe we study (e.g., a reaction flask)
Surroundings
Everything outside the system that can exchange energy
Universe
System + Surroundings: total energy is always conserved

State Functions vs. Path Functions

A state function depends only on the initial and final states, not on how the system got there. On the MCAT, the key state functions are enthalpy (\(H\)), entropy (\(S\)), and Gibbs free energy (\(G\)). Work (\(w\)) and heat (\(q\)) are path functions.

Reaction Coordinate Energy State A State B Path 1 Path 2
\(\Delta H\)

The First Law of Thermodynamics

Energy cannot be created or destroyed, only transferred or converted. The internal energy change of a system equals the heat added minus the work done by the system:

\(q > 0\)
System absorbs heat (endothermic)
\(q < 0\)
System releases heat (exothermic)
\(w > 0\)
System does work on surroundings (expansion)

Enthalpy (\(\Delta H\))

At constant pressure, the heat exchanged equals the enthalpy change. This is the quantity most commonly measured in calorimetry and the one that appears in Hess's Law problems.

Exothermic
\(\Delta H < 0\): heat flows out of the system. Products are lower in energy.
Endothermic
\(\Delta H > 0\): heat flows into the system. Products are higher in energy.

Hess's Law and Enthalpy Cycles

Because enthalpy is a state function, the total \(\Delta H\) for a reaction is the sum of the enthalpy changes for each step, regardless of the route taken.

Reactants Products Intermediates
\(\Delta H_{\text{direct}}\)
\(\Delta H_1\)
\(\Delta H_2\)

Entropy (\(\Delta S\))

Entropy measures the disorder or number of microstates available to a system. The Second Law states that the total entropy of the universe always increases for a spontaneous process.

1
Solids → Liquids → Gases: entropy increases with phase transitions that increase freedom of motion.
2
More moles of gas: reactions producing more gas molecules have \(\Delta S > 0\).
3
Dissolving: dissolving a solute usually increases entropy (more dispersed particles).

Gibbs Free Energy (\(\Delta G\))

Gibbs free energy combines enthalpy and entropy to predict spontaneity at constant temperature and pressure. This is the single most important equation for MCAT thermodynamics.

Spontaneity: \(\Delta H\) vs. \(T\Delta S\)

Whether a reaction is spontaneous depends on the interplay of enthalpy and entropy. Use this table to quickly classify reactions:

Condition \(\Delta H\) \(\Delta S\) Spontaneous?
Always spontaneous \(< 0\) \(> 0\) Yes, at all T
Never spontaneous \(> 0\) \(< 0\) No, at all T
Spontaneous at low T \(< 0\) \(< 0\) Only if \(\lvert\Delta H\rvert > T\lvert\Delta S\rvert\)
Spontaneous at high T \(> 0\) \(> 0\) Only if \(T\lvert\Delta S\rvert > \lvert\Delta H\rvert\)

\(\Delta G\) and Equilibrium

Gibbs free energy connects directly to the equilibrium constant \(K_{eq}\). This relationship appears frequently on the MCAT.

\(K_{eq} > 1\)
\(\Delta G^\circ < 0\): products favored at equilibrium
\(K_{eq} < 1\)
\(\Delta G^\circ > 0\): reactants favored at equilibrium

How to Solve Thermodynamics Problems

1
Identify the question type: Is it asking for \(\Delta H\), \(\Delta S\), \(\Delta G\), spontaneity, or \(K_{eq}\)?
2
Write the relevant equation: \(\Delta G = \Delta H - T\Delta S\) or \(\Delta G^\circ = -RT\ln K\).
3
Check units: Convert kJ to J if mixing with \(R\) (8.314 J/mol·K). Convert \(^\circ\)C to K.
4
Evaluate signs: Determine if \(\Delta H\) and \(\Delta S\) are positive or negative from the problem context.
5
Plug in and solve: Calculate \(\Delta G\) and interpret: negative = spontaneous, positive = non-spontaneous.

Example 1: Spontaneity Check

A reaction has \(\Delta H = -120 \text{ kJ/mol}\) and \(\Delta S = +0.250 \text{ kJ/(mol·K)}\). Is it spontaneous at \(T = 298 \text{ K}\)?

1
Write the equation: \(\Delta G = \Delta H - T\Delta S\)
2
Substitute: \(\Delta G = -120 - (298)(0.250)\)
3
Calculate: \(\Delta G = -120 - 74.5 = -194.5 \text{ kJ/mol}\)

Example 2: Finding Crossover Temperature

A reaction has \(\Delta H = +50 \text{ kJ/mol}\) and \(\Delta S = +0.150 \text{ kJ/(mol·K)}\). At what temperature does it become spontaneous?

1
Set \(\Delta G = 0\): At the crossover, \(0 = \Delta H - T\Delta S\)
2
Solve for T: \(T = \frac{\Delta H}{\Delta S} = \frac{50}{0.150}\)
3
Calculate: \(T = 333 \text{ K} \approx 60^\circ\text{C}\)

Example 3: \(\Delta G^\circ\) and \(K_{eq}\)

At 37\(^\circ\)C (body temperature), a biochemical reaction has \(\Delta G^\circ = -17.1 \text{ kJ/mol}\). What is \(K_{eq}\)?

1
Convert T: \(T = 37 + 273 = 310 \text{ K}\)
2
Convert units: \(\Delta G^\circ = -17{,}100 \text{ J/mol}\)
3
Rearrange: \(\ln K = \frac{-\Delta G^\circ}{RT} = \frac{17{,}100}{(8.314)(310)} = 6.63\)
4
Solve: \(K_{eq} = e^{6.63} \approx 758\)

Common Mistakes on the MCAT

✕ Confusing Spontaneous with Fast
\(\Delta G < 0\) means thermodynamically favorable, not kinetically fast. Diamond converting to graphite is spontaneous but takes millions of years.
✕ Unit Mismatch
Mixing kJ and J: \(\Delta H\) is often in kJ/mol but \(R = 8.314\) J/(mol·K). Always convert before plugging in.
✕ Forgetting Temperature in Kelvin
Using Celsius instead of Kelvin in \(\Delta G = \Delta H - T\Delta S\) produces wildly wrong answers. Always add 273.

Summary of Key Equations

Concept Equation When to Use
First Law \(\Delta U = q - w\) Internal energy changes
Enthalpy \(\Delta H = q_p\) Constant pressure heat
Hess's Law \(\Delta H = \sum \Delta H_i\) Multi-step reactions
Gibbs \(\Delta G = \Delta H - T\Delta S\) Spontaneity at given T
Gibbs-Keq \(\Delta G^\circ = -RT\ln K\) Linking \(\Delta G^\circ\) to equilibrium
Non-standard \(\Delta G = \Delta G^\circ + RT\ln Q\) Non-equilibrium conditions

Question 1 of 5

A reaction has \(\Delta H = -80 \text{ kJ/mol}\) and \(\Delta S = -0.200 \text{ kJ/(mol·K)}\). At what temperature does the reaction become non-spontaneous?

Question 2 of 5

Which of the following is always true for a reaction at equilibrium?

Question 3 of 5

If \(\Delta G^\circ\) for a reaction is +10 kJ/mol, which statement is correct?

Question 4 of 5

An ice cube melting at 25\(^\circ\)C has \(\Delta H > 0\). Why is this process spontaneous?

Question 5 of 5

According to the First Law of Thermodynamics, if a system absorbs 150 J of heat and does 50 J of work on its surroundings, what is \(\Delta U\)?