01 / 21

Chromatography
Techniques (5C)

Master the separation science behind column, thin-layer, gas, ion-exchange, size-exclusion, and affinity chromatography for the MCAT.

MCAT Chemical & Physical Foundations

What Is Chromatography?

Chromatography is a laboratory technique for separating mixtures based on differential affinities of analytes between a mobile phase (liquid or gas) and a stationary phase (solid or liquid coating). Components that interact more strongly with the stationary phase move more slowly, producing separation.

Essential Vocabulary

Mobile Phase
The solvent (liquid or gas) that carries analytes through the system
Stationary Phase
The fixed medium (solid or liquid film) that analytes interact with
Retention Time
Time from injection to detection peak: \( t_R \)
Eluent
The mobile phase solvent used to wash analytes through the column
Analyte
The target molecule being separated and detected

Why Chromatography Matters for the MCAT

The MCAT tests your ability to identify the correct separation technique for a given scenario, predict elution order, and interpret chromatographic data. Questions span general chemistry, organic chemistry, and biochemistry passages.

1
Technique selection: choosing between size-exclusion, ion-exchange, affinity, etc.
2
Elution order: predicting which analyte elutes first based on properties
3
Data interpretation: reading chromatograms and calculating \( R_f \) values

General Column Chromatography Setup

Eluent (mobile phase) Band A (strongly retained) Band B (moderate) Band C (weakly retained) To detector / collection Stationary Phase

The Retention Factor \( R_f \)

Origin Solvent front A B
\( d_A \)
\( d_{\text{solv}} \)

Six Key Chromatography Types

Column
Gravity-driven liquid through packed solid: separates by polarity
TLC
Thin-layer on silica plate: quick qualitative analysis via \( R_f \)
Gas (GC)
Volatile analytes carried by inert gas: separates by boiling point
Ion-Exchange
Charged resin beads: separates proteins by net charge at given pH
Size-Exclusion
Porous beads: large molecules elute first, small molecules enter pores
Affinity
Ligand-receptor binding on column: ultra-specific purification

Size-Exclusion vs. Ion-Exchange

Size-Exclusion Large Small (enters pores) Large elutes first Ion-Exchange - - - + - Same-charge elutes first vs.

Affinity Chromatography

Target binds Non-target proteins wash through Immobilized Ligand 1. Load sample 2. Wash impurities 3. Elute target (change pH / add competing ligand)

Gas Chromatography (GC)

Gas chromatography separates volatile compounds that can be vaporized without decomposition. The mobile phase is an inert carrier gas (\( \text{He} \) or \( \text{N}_2 \)), and the stationary phase is a liquid coating inside a long capillary column.

1
Injection: sample is vaporized at the heated inlet
2
Separation: compounds partition between gas and liquid phases based on boiling point and polarity
3
Detection: compounds reach the detector at different \( t_R \) values, producing a chromatogram

How to Choose the Right Technique

1
Identify the property that distinguishes your analytes: size, charge, polarity, specific binding, or volatility
2
Match to technique: size → size-exclusion; charge → ion-exchange; specific target → affinity; volatile → GC; polarity → column/TLC; HPLC for non-volatile high-resolution needs
3
Predict elution order: which analyte interacts least with the stationary phase? That one elutes first
4
Consider the question context: purifying a single protein from crude extract → affinity; separating two proteins of different MW → size-exclusion

Example 1: TLC Analysis

A student spots three compounds on a silica gel TLC plate (polar stationary phase) and develops it in a non-polar solvent. The solvent front travels 6.0 cm. Compound X travels 4.2 cm, Compound Y travels 1.8 cm, and Compound Z travels 3.0 cm.

Example 2: Ion-Exchange Separation

A mixture of three proteins is loaded onto a cation-exchange column (negatively charged resin) at pH 7. The proteins have isoelectric points (pI) of 5.0, 7.0, and 9.5.

Example 3: Size-Exclusion Elution

A researcher uses a size-exclusion column (gel filtration) to separate three proteins with molecular weights of 150 kDa, 45 kDa, and 10 kDa.

Elution Volume Signal 150 kDa 45 kDa 10 kDa

Common Mistakes

✕ Reversing SEC elution order
Small molecules do NOT elute first in size-exclusion. Large molecules are excluded from pores and elute first.
✕ Ignoring pH in ion-exchange
A protein's charge depends on pH vs. pI. Always determine net charge at the given pH before predicting binding.
✕ Confusing normal vs. reverse phase
Normal phase: polar stationary phase (silica). Reverse phase: non-polar stationary phase (\( C_{18} \)). Elution order is inverted between the two.

Technique Comparison Summary

Technique Separates By Elutes First Key Detail
Size-Exclusion Molecular size Largest Porous beads
Ion-Exchange Net charge Same charge as resin Salt gradient elutes
Affinity Specific binding Non-target proteins Most specific
Gas (GC) Boiling point / polarity Lowest BP Volatile only
TLC / Column Polarity Least polar (normal) \( R_f \) values
HPLC Varies (reverse/normal) Depends on phase High pressure, fast

Question 1 of 5

In size-exclusion chromatography, which protein elutes first from the column?

Question 2 of 5

A protein with a pI of 4.5 is loaded onto a cation-exchange column (negatively charged resin) at pH 7.0. What happens?

Question 3 of 5

A researcher wants to purify a His-tagged recombinant protein from a bacterial cell lysate. Which chromatography technique is most appropriate?

Question 4 of 5

On a silica gel TLC plate (normal phase), compound A has \( R_f = 0.8 \) and compound B has \( R_f = 0.2 \). Which statement is correct?

Question 5 of 5

In gas chromatography, what primarily determines the elution order of analytes through a non-polar capillary column?