01 / 21

Solubility &
Solubility Product

Master the equilibrium of sparingly soluble salts, calculate \( K_{sp} \), and predict whether a precipitate will form in solution.

MCAT Chemical & Physical Foundations

What Is Solubility?

Solubility is the maximum amount of solute that dissolves in a given quantity of solvent at a specific temperature to form a saturated solution. It is typically expressed in \(\text{mol/L}\) (molar solubility) or \(\text{g/L}\).

Soluble
Dissolves readily: \( > 0.1 \text{ M} \) at 25 °C. Example: NaCl.
Slightly Soluble
Limited dissolution: \(10^{-3}\) to \(10^{-1} \text{ M}\). Example: \(\text{PbCl}_2\).
Insoluble
Very little dissolves: \( < 10^{-3} \text{ M}\). Example: \(\text{AgCl}\).

Dissolution Equilibrium

When an ionic solid is placed in water, ions dissolve until the solution becomes saturated. At that point, the rate of dissolution equals the rate of precipitation: a dynamic equilibrium.

Solid salt + − + − Saturated Solution Cations Anions

Why It Matters in Biology

Solubility equilibria govern critical biological processes. Understanding \( K_{sp} \) helps explain how the body manages mineral deposits, signal ions, and waste products.

Bone Formation
\(\text{Ca}_{10}(\text{PO}_4)_6(\text{OH})_2\) (hydroxyapatite) precipitation builds bone and tooth enamel.
Kidney Stones
When \(\text{Ca}^{2+}\) and \(\text{C}_2\text{O}_4^{2-}\) exceed \( K_{sp} \), calcium oxalate precipitates painfully.
Blood \(\text{Ca}^{2+}\)
Tightly regulated: too high causes calcification, too low causes tetany. \( K_{sp} \) of \(\text{CaCO}_3\) matters.

The \( K_{sp} \) Expression

For a generic salt \( A_mB_n \) dissolving in water:

Key points: The solid does not appear in the expression because its activity is 1. \( K_{sp} \) is a temperature-dependent constant unique to each salt.

\( K_{sp} \) vs. Molar Solubility

Molar solubility (\( s \)) is the number of moles of salt that dissolve per liter to form a saturated solution. \( K_{sp} \) and \( s \) are related but not the same.

Property \( K_{sp} \) Molar Solubility \( s \)
Definition Product of ion concentrations at equilibrium Moles of salt dissolved per liter
Units Depends on stoichiometry (e.g., \(\text{M}^2\)) \(\text{mol/L}\) (M)
Comparison Use to compare salts with same formula type Use for direct solubility comparison
Depends on Temperature only Temperature, common ion, pH

Converting \( K_{sp} \) ↔ \( s \)

Use an ICE table approach. Let \( s \) = molar solubility. Then express each ion concentration in terms of \( s \):

1
Write the dissociation equation and note stoichiometric coefficients.
2
Express ion concentrations in terms of \( s \). For \( A_mB_n \): \([\text{A}^{n+}] = ms\), \([\text{B}^{m-}] = ns\).
3
Substitute into \( K_{sp} = (ms)^m(ns)^n \) and solve for \( s \).

\( Q \) vs \( K_{sp} \): Predicting Precipitation

The ion product \( Q \) (also called reaction quotient) uses actual ion concentrations. Compare \( Q \) with \( K_{sp} \) to predict what happens:

\( Q \lt K_{sp} \)
Unsaturated: more solid can dissolve. No precipitate forms.
\( Q = K_{sp} \)
Saturated: solution is at equilibrium. No net change.
\( Q \gt K_{sp} \)
Supersaturated: excess ions precipitate until \( Q = K_{sp} \).

The Common Ion Effect

Adding a common ion (an ion already present from the salt) shifts the equilibrium toward the solid, decreasing molar solubility. \( K_{sp} \) itself does not change.

Pure Water
\(s = \text{high}\)
+ Common Ion
\(s = \text{low}\)
Le Chatelier Molar Solubility decreases

Factors Affecting Solubility

Temperature
Most salts: solubility increases with \( T \). For exothermic dissolution, it may decrease.
Common Ion
Adding a shared ion decreases solubility (Le Chatelier's principle).
pH Effects
Salts of weak acids are more soluble in acidic solution. \(\text{H}^+\) removes anions from equilibrium.
Complex Ions
Ligands like \(\text{NH}_3\) remove cations by forming complex ions, increasing solubility.

Step-by-Step Problem Solving

1
Write the balanced dissolution equation for the salt.
2
Write the \( K_{sp} \) expression using ion concentrations raised to stoichiometric powers.
3
Set up an ICE table. Let \( s \) = molar solubility. Express each ion as a multiple of \( s \).
4
Substitute and solve for \( s \) (or use given \( s \) to find \( K_{sp} \)).
5
For precipitation: Calculate \( Q \) from actual concentrations and compare to \( K_{sp} \).

Example 1: \(\text{AgCl}\) Molar Solubility

Problem: Calculate the molar solubility of \(\text{AgCl}\) in pure water. \( K_{sp} = 1.8 \times 10^{-10} \).

Example 2: \(\text{CaF}_2\) Molar Solubility

Problem: Find the molar solubility of \(\text{CaF}_2\). \( K_{sp} = 3.9 \times 10^{-11} \).

Example 3: Precipitation Prediction

Problem: 50.0 mL of \( 2.0 \times 10^{-4}\;\text{M}\;\text{AgNO}_3 \) is mixed with 50.0 mL of \( 3.0 \times 10^{-4}\;\text{M}\;\text{NaCl} \). Will AgCl precipitate? \( K_{sp} = 1.8 \times 10^{-10} \).

Common Mistakes to Avoid

✕ Forgetting Coefficients
For \(\text{CaF}_2\): writing \( K_{sp} = s \cdot s \) instead of \( K_{sp} = s \cdot (2s)^2 = 4s^3 \). The stoichiometric coefficient becomes an exponent and a multiplier.
✕ Comparing \( K_{sp} \) Across Types
A salt with a larger \( K_{sp} \) is not necessarily more soluble if it has a different formula type. Compare \( s \) values instead.
✕ Ignoring Dilution
When mixing solutions, concentrations change due to dilution. Always recalculate \([\text{ion}]\) in the final volume before computing \( Q \).
✕ Including Solid in \( K_{sp} \)
The undissolved solid has an activity of 1 and does not appear in the equilibrium expression.

Summary Reference Table

Salt Type Dissociation \( K_{sp} \) in terms of \( s \) \( s \) in terms of \( K_{sp} \)
AB (1:1) \( A^+ + B^- \) \( s^2 \) \( \sqrt{K_{sp}} \)
\( AB_2 \) (1:2) \( A^{2+} + 2B^- \) \( 4s^3 \) \( \sqrt[3]{K_{sp}/4} \)
\( A_2B \) (2:1) \( 2A^+ + B^{2-} \) \( 4s^3 \) \( \sqrt[3]{K_{sp}/4} \)
\( AB_3 \) (1:3) \( A^{3+} + 3B^- \) \( 27s^4 \) \( \sqrt[4]{K_{sp}/27} \)
\( A_2B_3 \) (2:3) \( 2A^{3+} + 3B^{2-} \) \( 108s^5 \) \( \sqrt[5]{K_{sp}/108} \)

Question 1 of 5

What is the molar solubility of \(\text{PbI}_2\) given \( K_{sp} = 1.4 \times 10^{-8} \)?
(\(\text{PbI}_2 \rightleftharpoons \text{Pb}^{2+} + 2\,\text{I}^-\))

Question 2 of 5

If \( Q > K_{sp} \) for a solution, what will occur?

Question 3 of 5

How does adding NaCl to a saturated \(\text{AgCl}\) solution affect the molar solubility of AgCl?

Question 4 of 5

Which salt has the greatest molar solubility?

Question 5 of 5

The solubility of \(\text{CaCO}_3\) (\( K_{sp} = 3.3 \times 10^{-9}\)) increases when the solution is acidified. Which best explains this?