01 / 20
+ − +

Ions in
Solutions

Master electrolyte behavior, solubility rules, and the quantitative treatment of ionic species in aqueous systems for the MCAT.

MCAT Chem/Phys

What Are Ions in Solution?

When an ionic compound dissolves in water, it dissociates into its component cations (positive ions) and anions (negative ions). These free ions are surrounded by water molecules in a process called solvation (or hydration, when the solvent is water).

Electrolytes: Strong vs. Weak

Strong Electrolytes
Dissociate completely in water. All ions are free. Examples: NaCl, HCl, \(\text{NaOH}\), \(\text{KNO}_3\).
Weak Electrolytes
Dissociate partially. An equilibrium exists between undissociated molecules and ions. Examples: \(\text{CH}_3\text{COOH}\), \(\text{NH}_3\), HF.
Nonelectrolytes
Do not produce ions in solution. No conductivity. Examples: glucose (\(\text{C}_6\text{H}_{12}\text{O}_6\)), ethanol.

The Hydration Shell

Na⁺ H₂O δ− H₂O H₂O H₂O H₂O H₂O Cation: O points inward Cl⁻ H₂O δ+ H₂O H₂O H₂O H₂O H₂O Anion: H points inward Ion-dipole interactions orient water molecules

The Solubility Product \(K_{sp}\)

For a sparingly soluble salt, the dissolution equilibrium is described by the solubility product constant \(K_{sp}\):

The Common Ion Effect

Adding an ion that is already present in the equilibrium shifts the dissolution equilibrium to the left (Le Chatelier's Principle), decreasing solubility.

Pure Water \(s = 1.3 \times 10^{-5}\) M 0.10 M NaCl Common Cl⁻ \(s = 1.8 \times 10^{-9}\) M 0.50 M NaCl More Cl⁻ \(s = 3.6 \times 10^{-10}\) M Solubility of AgCl decreases with added Cl⁻

\(K_{sp}\) vs. \(Q\): Will It Precipitate?

Condition \(Q\) vs \(K_{sp}\) Result
\(Q \lt K_{sp}\) Unsaturated More dissolves
\(Q = K_{sp}\) Saturated At equilibrium
\(Q \gt K_{sp}\) Supersaturated Precipitate forms

Colligative Properties and Ions

Colligative properties depend on the number of solute particles, not their identity. Ionic solutes produce more particles than molecular solutes, amplifying these effects.

Boiling Point Elevation
\(\Delta T_b = i \cdot K_b \cdot m\)
Freezing Point Depression
\(\Delta T_f = i \cdot K_f \cdot m\)
Osmotic Pressure
\(\Pi = i \cdot M \cdot R \cdot T\)

Ionic Strength and Activity

In concentrated solutions, interionic attractions cause ions to behave as if their concentration were lower than actual. We use activity \(a\) instead of concentration:

How to Solve Ion Problems

1
Write the dissociation equation. Identify the ions produced and their stoichiometric coefficients.
2
Set up the \(K_{sp}\) expression. Use stoichiometric ratios to express each ion in terms of \(s\) (molar solubility).
3
Account for common ions. If a common ion is present, add its concentration to the relevant ion term.
4
Solve algebraically. For precipitation questions, calculate \(Q\) and compare with \(K_{sp}\).
5
Apply the van't Hoff factor \(i\) for colligative property calculations. Count all dissociated ions.

Example 1: Molar Solubility

Calculate the molar solubility of \(\text{PbI}_2\) given \(K_{sp} = 9.8 \times 10^{-9}\).

1
Dissociation: \(\text{PbI}_2(s) \rightleftharpoons \text{Pb}^{2+}(aq) + 2\,\text{I}^-(aq)\)
2
Express in terms of \(s\): \([\text{Pb}^{2+}] = s\), \([\text{I}^-] = 2s\)
3
\(K_{sp}\) expression: \(K_{sp} = (s)(2s)^2 = 4s^3\)
4
Solve: \(s = \sqrt[3]{\dfrac{K_{sp}}{4}} = \sqrt[3]{\dfrac{9.8 \times 10^{-9}}{4}} \approx 1.4 \times 10^{-3}\) M

Example 2: Precipitation Prediction

50.0 mL of \(0.0020\) M \(\text{Pb(NO}_3)_2\) is mixed with 50.0 mL of \(0.0040\) M KI. Will \(\text{PbI}_2\) precipitate? (\(K_{sp} = 9.8 \times 10^{-9}\))

1
New concentrations after mixing (total volume = 100 mL): \([\text{Pb}^{2+}] = 0.0010\) M, \([\text{I}^-] = 0.0020\) M
2
Calculate \(Q\): \(Q = [\text{Pb}^{2+}][\text{I}^-]^2 = (0.0010)(0.0020)^2 = 4.0 \times 10^{-9}\)
3
Compare: \(Q = 4.0 \times 10^{-9}\) < \(K_{sp} = 9.8 \times 10^{-9}\)

Example 3: Freezing Point Depression

Calculate the freezing point of a solution containing 0.50 m \(\text{CaCl}_2\) in water. (\(K_f = 1.86\) \(^\circ\text{C/m}\))

1
Determine \(i\): \(\text{CaCl}_2 \to \text{Ca}^{2+} + 2\,\text{Cl}^-\), so \(i = 3\)
2
Apply the formula: \(\Delta T_f = i \cdot K_f \cdot m = 3 \times 1.86 \times 0.50\)
3
Calculate: \(\Delta T_f = 2.79\,^\circ\text{C}\)
4
New freezing point: \(0.00 - 2.79 = -2.79\,^\circ\text{C}\)

Solubility Rules at a Glance

Ion Generally Soluble Exceptions
\(\text{Na}^+, \text{K}^+, \text{NH}_4^+\) Always soluble None
\(\text{NO}_3^-, \text{ClO}_4^-\) Always soluble None
\(\text{Cl}^-, \text{Br}^-, \text{I}^-\) Mostly soluble \(\text{Ag}^+, \text{Pb}^{2+}, \text{Hg}_2^{2+}\)
\(\text{SO}_4^{2-}\) Mostly soluble \(\text{Ba}^{2+}, \text{Pb}^{2+}, \text{Ca}^{2+}\)
\(\text{OH}^-, \text{S}^{2-}\) Mostly insoluble Group 1, \(\text{NH}_4^+\)
\(\text{CO}_3^{2-}, \text{PO}_4^{3-}\) Mostly insoluble Group 1, \(\text{NH}_4^+\)

Common Mistakes to Avoid

✕ Forgetting stoichiometry in \(K_{sp}\)
For \(\text{PbI}_2\), writing \(K_{sp} = s^2\) instead of \(K_{sp} = 4s^3\). Always raise each ion to its coefficient power.
✕ Ignoring dilution when mixing
When two solutions are mixed, total volume increases. Recalculate concentrations before computing \(Q\).
✕ Wrong van't Hoff factor
Using \(i = 2\) for \(\text{CaCl}_2\) instead of \(i = 3\). Count every ion: one \(\text{Ca}^{2+}\) plus two \(\text{Cl}^-\).

Question 1 of 5

What is the van't Hoff factor \(i\) for \(\text{Al}_2(\text{SO}_4)_3\) when it fully dissociates in water?

Question 2 of 5

The \(K_{sp}\) of \(\text{BaSO}_4\) is \(1.1 \times 10^{-10}\). What is its molar solubility in pure water?

Question 3 of 5

Adding \(\text{NaCl}\) to a saturated solution of \(\text{AgCl}\) will:

Question 4 of 5

Which aqueous solution has the highest boiling point elevation, assuming complete dissociation and equal molality?

Question 5 of 5

If \(Q \gt K_{sp}\) for a given ionic compound in solution, what will happen?