01 / 21

Mass Spectrometry
Atomic Identification

Learn how mass spectrometry separates ions by \( m/z \) ratio to identify elements, isotopes, and calculate atomic mass.

MCAT Chem/Phys

What Is Mass Spectrometry?

Mass spectrometry (MS) is an analytical technique that measures the mass-to-charge ratio (\( m/z \)) of ions. It is used to determine molecular masses, identify unknown compounds, and quantify the relative abundance of isotopes in a sample.

The Four Stages of MS

1
Ionization: The sample is bombarded with electrons or a laser to remove electrons, creating cations (\( M^+ \)).
2
Acceleration: Ions are accelerated through an electric field, gaining kinetic energy \( KE = qV \).
3
Deflection: A magnetic field bends ion paths: lighter ions and ions with higher charge are deflected more.
4
Detection: A detector records which \( m/z \) values reach it, producing the mass spectrum.

How Deflection Separates Ions

Ion Source V Magnetic Field (B) Heavy (large m/z) Light (small m/z) Detector

The Core Equations

Kinetic Energy
After acceleration through potential \( V \):
$$ qV = \tfrac{1}{2}mv^2 $$
Radius of Curvature
In magnetic field \( B \):
$$ r = \frac{mv}{qB} $$
Combined
Substituting \( v \):
$$ \frac{m}{z} = \frac{r^2 B^2 e}{2V} $$

Reading a Mass Spectrum

m/z Relative Abundance (%) 0 50 100 75.8% 35 24.2% 37 Chlorine Two stable isotopes

Isotopes vs Ions: Key Distinction

Isotopes Ions
Definition Same element, different neutrons Atom with net charge
Changes Mass number (\( A \)) Electron count
Protons Same (\( Z \)) Same (\( Z \))
MS Role Different \( m/z \) peaks Charge state affects \( m/z \)
Example \( ^{12}\text{C} \) vs \( ^{13}\text{C} \) \( \text{Na}^+ \), \( \text{Cl}^- \)

Calculating Average Atomic Mass

The average atomic mass on the periodic table is a weighted average of all naturally occurring isotopes, using their fractional abundances from the mass spectrum:

How to Apply MS Data

1
Identify peaks: Read each \( m/z \) value from the x-axis. These are your isotopic masses.
2
Read abundances: Record the relative abundance (%) for each peak from the y-axis.
3
Convert to fractions: Divide each percentage by the sum of all percentages (or 100 if given as %).
4
Compute weighted average: Multiply each isotopic mass by its fraction and sum: \( \bar{m} = \sum f_i m_i \).
5
Verify: Check that \( \bar{m} \) falls between the lightest and heaviest isotope, closer to the most abundant.

Example 1: Chlorine

The mass spectrum of chlorine shows two peaks:
\( ^{35}\text{Cl} \): \( m/z = 35 \), abundance = 75.77%
\( ^{37}\text{Cl} \): \( m/z = 37 \), abundance = 24.23%

Example 2: Boron

m/z Abundance (%) 0 50 100 19.9% 10 80.1% 11

Example 3: Magnesium (Three Isotopes)

m/z Abundance (%) 0 100 79.0% 24 10.0% 25 11.0% 26

Molecular Ion and Fragmentation

When molecules (not just atoms) are analyzed, the mass spectrum becomes richer. The molecular ion peak (\( M^+ \)) corresponds to the intact molecule minus one electron. Smaller peaks arise from fragmentation: the molecule breaking into charged fragments inside the ionization chamber.

\( M^+ \) Peak
Highest \( m/z \) in the spectrum. Gives the molecular mass directly.
Fragment Peaks
Lower \( m/z \) values. Differences from \( M^+ \) reveal structural groups lost.
Base Peak
The tallest peak (100% abundance). May or may not be \( M^+ \).

Why \( m/z \) Matters for the MCAT

1
Identify unknowns: The molecular ion peak gives the molar mass of an unknown compound.
2
Distinguish isotopes: Different isotopes of the same element appear as separate peaks.
3
Determine structure: Fragmentation patterns reveal functional groups and bonding.
4
Calculate atomic mass: Use peak heights as relative abundances for the weighted average formula.

Common Mistakes

✕ Confusing mass number with atomic mass
Mass number (\( A \)) is an integer (protons + neutrons). Atomic mass is the weighted average of all isotopes and is rarely an integer.
✕ Forgetting charge effects on \( m/z \)
A doubly-charged ion (\( z = 2 \)) appears at half the expected mass. Always check: \( m/z = m/2 \) for \( 2+ \) ions.
✕ Using percentages instead of fractions
The weighted average formula requires fractional abundances (e.g., 0.758, not 75.8). Divide by 100 first.

Summary Reference Table

Concept Key Fact MCAT Tip
\( m/z \) Ratio Mass per unit charge Usually \( z = 1 \)
Deflection \( r = mv/(qB) \) Lighter = more deflected
Avg. Atomic Mass \( \bar{m} = \sum f_i m_i \) Must be between min/max isotope
Molecular Ion Highest \( m/z \) peak Gives molecular weight
Fragmentation Bond-breaking patterns Differences = groups lost

Question 1 of 5

In a mass spectrometer, which property is plotted on the x-axis of the mass spectrum?

Question 2 of 5

An element has two isotopes: \( ^{63}X \) at 69.2% and \( ^{65}X \) at 30.8%. What is its average atomic mass?

Question 3 of 5

A molecule with mass 60 amu is ionized to form a doubly-charged ion (\( z = 2 \)). At what \( m/z \) value will this ion appear in the mass spectrum?

Question 4 of 5

In a mass spectrometer, two ions with the same charge but different masses enter the magnetic field. Which ion will be deflected more?

Question 5 of 5

A mass spectrum shows a peak at \( m/z = 88 \) (the highest \( m/z \) in the spectrum) and a peak at \( m/z = 60 \). What is the mass of the fragment lost?