01 / 21

Interference, Diffraction
& Polarization

Master the wave phenomena that govern how light bends, combines, and filters: essential physics for the MCAT.

MCAT Physics

What Are Wave Phenomena?

Light behaves as a transverse electromagnetic wave. When waves meet obstacles, slits, or each other, three key phenomena emerge: interference, diffraction, and polarization. Each follows directly from the wave nature of light.

Interference
Two or more waves superpose, producing regions of reinforcement and cancellation.
Diffraction
Waves bend and spread when passing through an aperture or around an obstacle.
Polarization
The oscillation direction of the electric field is restricted to a single plane.

The Superposition Principle

When two waves overlap, the resultant displacement at any point equals the algebraic sum of the individual displacements. This is the foundation for all interference effects.

Wave 1 Wave 2 Superpose →

Constructive vs Destructive Interference

Constructive \( \Delta \phi = 0, 2\pi, 4\pi \ldots \) Destructive \( \Delta \phi = \pi, 3\pi, 5\pi \ldots \)

Young's Double-Slit Experiment

Source S1 S2 Screen d \(\theta\)

Single-Slit Diffraction

a Intensity Central max

Diffraction Grating: Many Slits

A diffraction grating has thousands of slits per centimeter. It uses the same constructive-interference condition as the double slit, but produces much sharper, brighter maxima.

Double Slit
Broad, overlapping bright fringes; low resolution.
Grating
Sharp, narrow maxima; separates wavelengths precisely.

Thin-Film Interference

Air (n = 1) Film (\( n = n_f \)) t Substrate (\( n = n_s \)) Incident Ray 1 Ray 2 phase shift?

What Is Polarization?

Light is a transverse wave: the electric field oscillates perpendicular to the direction of propagation. Unpolarized light has E-field vectors in all transverse directions. A polarizer transmits only one component.

z Unpolarized Polarizer Polarized \( I_0 \) \( \frac{I_0}{2} \)

Malus's Law: \( I = I_0 \cos^2\theta \)

When already-polarized light passes through a second polarizer (analyzer) at angle \( \theta \) to the first, the transmitted intensity follows Malus's Law.

P1 (vertical) P2 (angle \(\theta\)) \(\theta\) \( I = I_0 \cos^2\theta \)
\( \theta = 0^\circ \)
Maximum transmission: \( I = I_0 \)
\( \theta = 45^\circ \)
Half intensity: \( I = \frac{I_0}{2} \)
\( \theta = 90^\circ \)
Complete extinction: \( I = 0 \)

Interference vs Diffraction

Interference Diffraction
Source Two or more coherent sources Single aperture or obstacle
Cause Superposition of discrete waves Spreading of wave past edges
Bright fringe eq. \( d\sin\theta = m\lambda \) Between the minima
Dark fringe eq. \( d\sin\theta = (m+\frac{1}{2})\lambda \) \( a\sin\theta = m\lambda \)
Fringe width Equally spaced Central max is 2x wider
Intensity Equal maxima Rapidly decreasing from center

How to Solve Wave Optics Problems

1
Identify the setup: Is it double-slit, single-slit, grating, thin film, or polarization?
2
Choose the equation: Write the correct condition for maxima or minima. Check if the equation gives bright or dark fringes.
3
Account for phase shifts: For thin film, check if reflection introduces a \( \pi \) phase shift (low-to-high index boundary).
4
Solve for the unknown: Rearrange for \( \lambda \), \( \theta \), \( d \), or \( m \). Use \(\sin\theta \approx \theta\) for small angles.
5
Check units and reasonableness: Visible light: \( 400\text{-}700\,\text{nm} \). Angles for low-order fringes are typically small.

Example 1: Double-Slit Bright Fringe

Light of wavelength \( \lambda = 550\,\text{nm} \) passes through two slits separated by \( d = 0.20\,\text{mm} \). Find the angle \( \theta \) for the second-order bright fringe.

1
Setup: Double-slit, bright fringe → \( d\sin\theta = m\lambda \)
2
Plug in: \( m = 2 \), so \( \sin\theta = \frac{m\lambda}{d} = \frac{2 \times 550 \times 10^{-9}}{0.20 \times 10^{-3}} \)
3
Calculate: \( \sin\theta = \frac{1.1 \times 10^{-6}}{2.0 \times 10^{-4}} = 5.5 \times 10^{-3} \)
4
Result: \( \theta = \sin^{-1}(0.0055) \approx 0.32^\circ \). Small angle, as expected for visible light with sub-mm slit spacing.

Example 2: Thin-Film Minimum Thickness

An oil film (\( n = 1.40 \)) on water (\( n = 1.33 \)) appears green (\( \lambda = 520\,\text{nm} \)) in reflected light. What is the minimum non-zero thickness for constructive interference?

1
Phase shifts: Air → oil (low to high \( n \)): phase shift of \( \pi \). Oil → water (high to low \( n \)): no phase shift. Only one reflection has a phase shift.
2
Constructive condition (one phase shift): \( 2n_f t = \left(m + \tfrac{1}{2}\right)\lambda \)
3
Minimum thickness (\( m = 0 \)): \( t = \frac{\lambda}{4n_f} = \frac{520}{4(1.40)} \approx 92.9\,\text{nm} \)

Example 3: Two-Polarizer Intensity

Unpolarized light of intensity \( I_0 = 800\,\text{W/m}^2 \) passes through two polarizers. The second is oriented at \( 60^\circ \) to the first. Find the final intensity.

1
After Polarizer 1: Unpolarized → polarized. \( I_1 = \frac{I_0}{2} = \frac{800}{2} = 400\,\text{W/m}^2 \)
2
After Polarizer 2 (Malus's Law): \( I_2 = I_1 \cos^2 60^\circ = 400 \times (0.5)^2 = 400 \times 0.25 \)
3
Result: \( I_2 = 100\,\text{W/m}^2 \). The light is now \( \frac{1}{8} \) of the original intensity.

Common Mistakes to Avoid

✕ Swapping max/min equations
\( d\sin\theta = m\lambda \) gives maxima for double-slit but minima for single-slit. Always check which setup you have.
✕ Forgetting phase shifts
In thin-film problems, a reflection at a higher-index boundary adds \( \pi \) phase shift. Missing this flips constructive/destructive conditions.
✕ Using Malus's Law on unpolarized light
Malus's Law \( I = I_0\cos^2\theta \) applies only to already-polarized light. For the first polarizer, use \( I = I_0/2 \).

Question 1 of 5

In Young's double-slit experiment, the condition for the third bright fringe is:

Question 2 of 5

For single-slit diffraction, the equation \( a\sin\theta = m\lambda \) (with \( m \neq 0 \)) gives positions of:

Question 3 of 5

Unpolarized light of intensity \( I_0 \) passes through two ideal polarizers. The second polarizer's axis is at \( 30^\circ \) to the first. What is the final transmitted intensity?

Question 4 of 5

A thin film of oil (\( n = 1.50 \)) on glass (\( n = 1.60 \)) is illuminated with \( 600\,\text{nm} \) light. Both reflections occur at low-to-high index boundaries. For constructive interference, the minimum thickness is:

Question 5 of 5

A diffraction grating with 5000 slits/cm is used with \( 500\,\text{nm} \) light. What is the maximum order \( m \) of bright fringes that can be observed?