01 / 21

Geometrical Optics
Image Formation

Master reflection, refraction, and lens equations to predict how light bends and forms images: essential physics for the MCAT.

MCAT Physics

What is Geometrical Optics?

Geometrical optics treats light as straight-line rays that change direction when they encounter surfaces. This approximation works when objects are much larger than the wavelength of light, letting us predict how mirrors and lenses form images.

Reflection
Light bounces off a surface: angle of incidence equals angle of reflection.
Refraction
Light bends as it passes between media with different indices of refraction.
Image Formation
Converging or diverging rays produce real or virtual images at predictable locations.

The Law of Reflection

Normal \(\theta_i\) \(\theta_r\) Incident ray Reflected ray Mirror surface

Snell's Law of Refraction

Normal \(\theta_1\) \(\theta_2\) \(n_1\) (air) \(n_2\) (glass)

Index of Refraction

The index of refraction \( n \) describes how much light slows down in a medium: \( n = \dfrac{c}{v} \), where \( c \) is the speed of light in vacuum and \( v \) is the speed in the medium.

Vacuum / Air
\( n \approx 1.00 \)
Water
\( n \approx 1.33 \)
Glass
\( n \approx 1.50 \)
Diamond
\( n \approx 2.42 \)

The Thin Lens Equation

Object Image F F \(d_o\) \(d_i\)

Magnification and Sign Conventions

The magnification \( m \) tells you how the image size and orientation compare to the object:

+ \( d_i \)
Image on opposite side of lens from object: real
- \( d_i \)
Image on same side as object: virtual

Converging vs Diverging Lenses

Converging F \(f > 0\) Diverging F \(f < 0\)
Converging (Convex)
\( f > 0 \). Thicker in the center. Can form real or virtual images.
Diverging (Concave)
\( f < 0 \). Thinner in the center. Always forms virtual, upright, reduced images.

Concave and Convex Mirrors

Mirrors use the same thin lens equation \(\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}\), but with different sign conventions for the focal length.

Concave Mirror
\( f > 0 \). Converges light. Can produce real or virtual images depending on object position. \( f = \frac{R}{2} \).
Convex Mirror
\( f < 0 \). Diverges light. Always produces virtual, upright, reduced images. Used in car side mirrors.

Real vs Virtual Images

Real Image Virtual Image
Formed by Converging rays Diverging rays (extended back)
Can be projected? Yes No
Orientation Inverted Upright
\( d_i \) sign Positive Negative
Magnification sign \( m < 0 \) \( m > 0 \)
Example Movie projector Flat bathroom mirror

How to Solve Optics Problems

1
Identify the optical element: Is it a lens (converging or diverging) or a mirror (concave or convex)?
2
Assign signs: Determine \( f \) (positive for converging, negative for diverging) and \( d_o \) (always positive for real objects).
3
Apply the thin lens equation: Solve \( \frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} \).
4
Calculate magnification: Use \( m = -\frac{d_i}{d_o} \) to find size and orientation.
5
Interpret the result: Positive \( d_i \) = real image; negative \( d_i \) = virtual image. Check if \( m \) is positive (upright) or negative (inverted).

Example 1: Converging Lens

An object is placed 30 cm from a converging lens with focal length \( f = 10 \) cm. Where does the image form?

1
Given: \( d_o = 30 \) cm, \( f = +10 \) cm (converging)
2
Apply: \( \frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = \frac{1}{10} - \frac{1}{30} = \frac{3-1}{30} = \frac{2}{30} \)
3
Solve: \( d_i = \frac{30}{2} = \)+15 cm
4
Magnification: \( m = -\frac{15}{30} = -0.5 \) : image is inverted and reduced to half size.

Example 2: Diverging Lens

An object is placed 20 cm from a diverging lens with focal length \( f = -10 \) cm. Find the image location and properties.

1
Given: \( d_o = 20 \) cm, \( f = -10 \) cm (diverging)
2
Apply: \( \frac{1}{d_i} = \frac{1}{-10} - \frac{1}{20} = \frac{-2-1}{20} = \frac{-3}{20} \)
3
Solve: \( d_i = -\frac{20}{3} \approx \)-6.7 cm
4
Magnification: \( m = -\frac{-6.7}{20} = +0.33 \) : image is upright and reduced.

Example 3: Concave Mirror

An object is placed 5 cm from a concave mirror with focal length \( f = +10 \) cm. What happens?

1
Given: \( d_o = 5 \) cm, \( f = +10 \) cm (object is inside the focal point)
2
Apply: \( \frac{1}{d_i} = \frac{1}{10} - \frac{1}{5} = \frac{1-2}{10} = -\frac{1}{10} \)
3
Solve: \( d_i = \)-10 cm
4
Magnification: \( m = -\frac{-10}{5} = +2 \) : image is upright and magnified 2x.

Common Mistakes in Optics

✕ Forgetting Sign Conventions
Diverging lenses have \( f < 0 \) and virtual images have \( d_i < 0 \). Always assign signs before plugging into the equation.
✕ Confusing Lens and Mirror Types
A convex lens converges light, but a convex mirror diverges it. Shape alone does not determine behavior: context matters.
✕ Measuring Angles from the Surface
Both reflection and refraction angles are measured from the normal (perpendicular), not from the surface itself.

Summary: Optical Elements

Converging Lens Diverging Lens Concave Mirror Convex Mirror
Focal length \( f > 0 \) \( f < 0 \) \( f > 0 \) \( f < 0 \)
Shape Thick center Thin center Curves inward Curves outward
Real image? Yes (if \(d_o > f\)) Never Yes (if \(d_o > f\)) Never
Virtual image? If \( d_o < f \) Always If \( d_o < f \) Always
Example Magnifying glass Eyeglasses (myopia) Makeup mirror Car side mirror

Question 1 of 5

An object is placed 20 cm from a converging lens with \( f = 20 \) cm. What is the image distance \( d_i \)?

Question 2 of 5

A diverging lens always produces images that are:

Question 3 of 5

Light travels from water (\( n = 1.33 \)) into air (\( n = 1.00 \)). What is the critical angle for total internal reflection?

Question 4 of 5

An object placed 15 cm from a concave mirror produces an image with magnification \( m = -2 \). What is the focal length of the mirror?

Question 5 of 5

The magnification of an image is \( m = +0.5 \). Which of the following is true?