01 / 21
+

Electrochemical Cells
and Redox Reactions

Master galvanic and electrolytic cells, standard reduction potentials, and the Nernst equation for MCAT success.

MCAT Chemical & Physical Foundations

What Are Redox Reactions?

Redox reactions involve the transfer of electrons between chemical species. Every redox reaction has two complementary half-reactions:

Oxidation
Loss of electrons. The oxidation state increases. The species that is oxidized is the reducing agent.
Reduction
Gain of electrons. The oxidation state decreases. The species that is reduced is the oxidizing agent.

Assigning Oxidation States

1
Free elements have an oxidation state of \(0\) (e.g., \(\text{Zn}\), \(\text{Cu}\)).
2
Monoatomic ions have an oxidation state equal to their charge (e.g., \(\text{Na}^+\) is \(+1\)).
3
Oxygen is typically \(-2\) (except in peroxides, where it is \(-1\)).
4
Hydrogen is typically \(+1\) (except in metal hydrides, where it is \(-1\)).
5
The sum of oxidation states in a neutral compound equals \(0\); in a polyatomic ion, it equals the ion charge.

Anatomy of a Galvanic Cell

Anode (Oxidation)
\( \text{Zn} \)
\( \text{ZnSO}_4 \text{ (aq)} \)
Cathode (Reduction)
\( \text{Cu} \)
\( \text{CuSO}_4 \text{ (aq)} \)
Salt Bridge
\(e^-\) flow
\(V\)
\( \text{Zn} \to \text{Zn}^{2+} + 2e^- \)
\( \text{Cu}^{2+} + 2e^- \to \text{Cu} \)

Standard Reduction Potentials \(E^\circ\)

Each half-reaction has a standard reduction potential (\(E^\circ\)) measured in volts (V) relative to the Standard Hydrogen Electrode (SHE), which is defined as \(E^\circ = 0.00\,\text{V}\).

More Positive \(E^\circ\)
Greater tendency to be reduced. Stronger oxidizing agent. Found at the cathode.
More Negative \(E^\circ\)
Greater tendency to be oxidized. Stronger reducing agent. Found at the anode.

Calculating \(E^\circ_{\text{cell}}\)

For the Daniell cell with Zn/Cu electrodes:

1
Cathode (reduction): \(\text{Cu}^{2+} + 2e^- \to \text{Cu}\), \(E^\circ = +0.34\,\text{V}\)
2
Anode (oxidation): \(\text{Zn} \to \text{Zn}^{2+} + 2e^-\), \(E^\circ_{\text{reduction}} = -0.76\,\text{V}\)
3
Calculate: \(E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = (+0.34) - (-0.76) = +1.10\,\text{V}\)

The Nernst Equation

Under non-standard conditions, the cell potential depends on the concentrations of reactants and products:

\(n\)
Moles of electrons transferred in the balanced equation
\(F\)
Faraday's constant: \(96{,}485\,\text{C/mol}\)
\(Q\)
Reaction quotient: ratio of product to reactant concentrations

Thermodynamic Connections

Electrochemistry is deeply connected to thermodynamics. These three equations link \(\Delta G^\circ\), \(E^\circ\), and \(K\):

\(\Delta G^\circ\)
\(E^\circ_{\text{cell}}\)
\(K\)
\(\Delta G^\circ = -nFE^\circ\)
\(\Delta G^\circ = -RT \ln K\)
\(E^\circ = \frac{RT}{nF} \ln K\)

Galvanic vs Electrolytic Cells

Galvanic (Voltaic) Electrolytic
\(\Delta G\) \(\Delta G < 0\) (spontaneous) \(\Delta G > 0\) (non-spontaneous)
\(E_{\text{cell}}\) Positive Negative (requires external voltage)
Energy conversion Chemical → Electrical Electrical → Chemical
Anode charge Negative (−) Positive (+)
Cathode charge Positive (+) Negative (−)
Example Battery Electroplating

How to Solve Cell Problems

1
Identify the half-reactions: Write the oxidation and reduction half-reactions separately.
2
Look up \(E^\circ\) values: Find the standard reduction potentials for each half-reaction.
3
Calculate \(E^\circ_{\text{cell}}\): Use \(E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}\). The more positive \(E^\circ\) is the cathode.
4
Check spontaneity: Positive \(E^\circ_{\text{cell}}\) = galvanic. Negative = requires electrolysis.
5
Non-standard? Apply the Nernst equation: \(E = E^\circ - \frac{0.0592}{n}\log Q\).

Example 1: Cell Potential

A galvanic cell uses \(\text{Ag}/\text{Ag}^+\) and \(\text{Fe}/\text{Fe}^{2+}\) half-cells. Given:
\(\text{Ag}^+ + e^- \to \text{Ag}\), \(E^\circ = +0.80\,\text{V}\)
\(\text{Fe}^{2+} + 2e^- \to \text{Fe}\), \(E^\circ = -0.44\,\text{V}\)
Find \(E^\circ_{\text{cell}}\).

1
Identify cathode and anode: Ag has the more positive \(E^\circ\), so Ag is the cathode. Fe is the anode.
2
Apply the formula: \(E^\circ_{\text{cell}} = +0.80 - (-0.44) = +1.24\,\text{V}\)
3
Conclusion: The cell potential is +1.24 V. Since it is positive, this reaction is spontaneous.

Example 2: Nernst Equation

For the Daniell cell (\(E^\circ_{\text{cell}} = +1.10\,\text{V}\), \(n = 2\)), find \(E\) when \([\text{Zn}^{2+}] = 0.10\,\text{M}\) and \([\text{Cu}^{2+}] = 2.0\,\text{M}\) at \(25\,^\circ\text{C}\).

1
Write \(Q\): \(Q = \frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]} = \frac{0.10}{2.0} = 0.050\)
2
Apply Nernst: \(E = 1.10 - \frac{0.0592}{2}\log(0.050)\)
3
Compute: \(\log(0.050) \approx -1.30\), so \(E = 1.10 - (0.0296)(-1.30) = 1.10 + 0.038 = \) \(+1.14\,\text{V}\)

Example 3: \(\Delta G^\circ\) from \(E^\circ\)

Calculate \(\Delta G^\circ\) for the Daniell cell: \(E^\circ_{\text{cell}} = +1.10\,\text{V}\), \(n = 2\).

1
Formula: \(\Delta G^\circ = -nFE^\circ\)
2
Substitute: \(\Delta G^\circ = -(2)(96{,}485\,\text{C/mol})(1.10\,\text{V})\)
3
Result: \(\Delta G^\circ = -212{,}267\,\text{J/mol} \approx\) \(-212\,\text{kJ/mol}\)

Concentration Cells

A concentration cell uses identical electrodes but different ion concentrations. Since both half-reactions are the same, \(E^\circ_{\text{cell}} = 0\). The voltage comes entirely from the concentration difference.

Anode
\([\text{Cu}^{2+}] = 0.01\,\text{M}\)
Cathode
\([\text{Cu}^{2+}] = 1.0\,\text{M}\)
\(e^-\) flow

Common Mistakes to Avoid

✕ Flipping the Sign
When using \(E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}\), do NOT manually flip the anode sign first. The subtraction handles it.
✕ Multiplying \(E^\circ\)
\(E^\circ\) is intensive: it does NOT change when you multiply a half-reaction to balance electrons. Only \(\Delta G\) scales.
✕ Electrode Sign Confusion
In galvanic cells, the anode is (−). In electrolytic cells, the anode is (+). But oxidation always occurs at the anode in both.

Key Equations Summary

Equation Formula When to Use
Cell Potential \(E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}\) Standard conditions
Nernst Equation \(E = E^\circ - \frac{0.0592}{n}\log Q\) Non-standard conditions
Gibbs Free Energy \(\Delta G^\circ = -nFE^\circ\) Link to thermodynamics
Equilibrium Constant \(\ln K = \frac{nFE^\circ}{RT}\) At equilibrium (\(E = 0\))
Faraday's Law \(m = \frac{MIt}{nF}\) Mass deposited in electrolysis

Question 1 of 5

In a galvanic cell, which statement is always true?

Question 2 of 5

Given \(E^\circ(\text{Ag}^+/\text{Ag}) = +0.80\,\text{V}\) and \(E^\circ(\text{Ni}^{2+}/\text{Ni}) = -0.26\,\text{V}\), what is \(E^\circ_{\text{cell}}\) for a galvanic cell?

Question 3 of 5

A reaction has \(E^\circ_{\text{cell}} = +0.46\,\text{V}\) and \(n = 2\). What is \(\Delta G^\circ\)?

Question 4 of 5

In a concentration cell using Cu electrodes, \([\text{Cu}^{2+}]\) is 0.001 M in one half-cell and 1.0 M in the other. Which half-cell is the anode?

Question 5 of 5

Which of the following is true about electrolytic cells?