01 / 21

Fluid Properties &
Hydrostatics (4B)

Master density, pressure, and Pascal's & Archimedes' principles for the MCAT Chemical & Physical Foundations section.

MCAT Chem/Phys

What is a Fluid?

A fluid is any substance that flows and conforms to the shape of its container. Both liquids and gases are fluids. On the MCAT, most problems deal with incompressible, ideal fluids (liquids like water and blood).

Liquids
Nearly incompressible, definite volume, takes shape of container
Gases
Compressible, fills entire container, no definite volume

Density and Specific Gravity

Density (\(\rho\)) is mass per unit volume. Specific gravity (SG) compares a substance's density to water's density.

Water
\(\rho = 1000\;\text{kg/m}^3\), SG = 1.0
Blood
\(\rho \approx 1060\;\text{kg/m}^3\), SG ≈ 1.06
Mercury
\(\rho = 13{,}600\;\text{kg/m}^3\), SG = 13.6

Understanding Pressure

Pressure is force per unit area. In fluids, pressure acts equally in all directions at a given point (it is a scalar, not a vector).

1 atm
\(= 101{,}325\;\text{Pa}\)
\(\approx 10^5\;\text{Pa}\)
760 mmHg
\(= 760\;\text{torr}\)
\(= 1\;\text{atm}\)

Hydrostatic Pressure Equation

surface
\(h\)
\(P\)
\(P_0\) (atm)
\(g\)

Pascal's Principle

A change in pressure applied to an enclosed, incompressible fluid is transmitted undiminished to every point in the fluid and to the walls of the container.

\(F_1\)
\(A_1\)
\(F_2\)
\(A_2\)

Archimedes' Principle

Any object wholly or partially immersed in a fluid experiences an upward buoyant force equal to the weight of the fluid displaced.

object
\(F_b\)
\(W\)
displaced volume

Floating vs. Sinking

Whether an object floats or sinks depends on comparing the object's density to the fluid's density.

Floats
\(\rho_{\text{obj}} \lt \rho_{\text{fluid}}\)
Buoyant force > weight: object rises until equilibrium
Neutral
\(\rho_{\text{obj}} = \rho_{\text{fluid}}\)
Object remains suspended at any depth
Sinks
\(\rho_{\text{obj}} \gt \rho_{\text{fluid}}\)
Weight > buoyant force: object descends

Gauge vs. Absolute Pressure

Gauge Pressure Absolute Pressure
Definition Pressure above atmospheric Total pressure at a point
Formula \(P_g = \rho g h\) \(P = P_0 + \rho g h\)
At surface 0 Pa \(P_0 \approx 10^5\) Pa
Can be negative? Yes (vacuum) No (minimum is 0)
Used in Tire gauges, blood pressure Gas laws, thermodynamics

How to Solve Hydrostatics Problems

1
Identify the fluid(s). Note density \(\rho\), whether compressible or not, and any layering (e.g., oil on water).
2
Choose a reference point. Usually the fluid surface where \(P = P_0\) (atmospheric). Measure depth \(h\) downward.
3
Apply the correct equation. Use \(P = P_0 + \rho g h\) for pressure, \(F_b = \rho_f V_d g\) for buoyancy, or Pascal's law for hydraulic systems.
4
Check units. Convert to SI: kg, m, s, Pa. Watch for cm→m, g→kg, and atm→Pa conversions.
5
Sanity check. Does pressure increase with depth? Does a denser object sink? Is the buoyant force reasonable?

Example: Hydrostatic Pressure

A diver is 15 m below the surface of a freshwater lake. What is the absolute pressure at this depth? (Use \(g = 10\;\text{m/s}^2\), \(P_0 = 1 \times 10^5\;\text{Pa}\))

Example: Buoyant Force

A wooden block (\(\rho = 600\;\text{kg/m}^3\)) with volume \(0.02\;\text{m}^3\) is placed in water. Find the buoyant force and the fraction submerged.

Example: Hydraulic Lift

A hydraulic lift has a small piston of area \(A_1 = 0.01\;\text{m}^2\) and a large piston of area \(A_2 = 0.5\;\text{m}^2\). A force of 200 N is applied to the small piston. What force is exerted by the large piston?

Surface Tension and Capillary Action

Surface tension (\(\gamma\)) arises from cohesive intermolecular forces at a fluid's surface, causing the surface to behave like an elastic membrane.

Cohesion
Attraction between like molecules (water-water). Creates surface tension.
Adhesion
Attraction between unlike molecules (water-glass). Drives capillary action.

Common Mistakes

✕ Forgetting \(P_0\)
Using gauge pressure \(\rho g h\) when the problem asks for absolute pressure. Always check which one is requested.
✕ Wrong \(\rho\) in Buoyancy
Using the object's density instead of the fluid's density in \(F_b = \rho_f V_d g\). The buoyant force depends on the surrounding fluid.
✕ Confusing \(V_{\text{obj}}\) and \(V_d\)
For floating objects, only the submerged volume is displaced. \(V_d \neq V_{\text{obj}}\) unless the object is fully submerged.

Key Equations Summary

Concept Equation Key Variable
Density \(\rho = m / V\) \(\rho\) in kg/m³
Pressure \(P = F / A\) \(P\) in Pa
Hydrostatic \(P = P_0 + \rho g h\) \(h\) = depth
Buoyancy \(F_b = \rho_f V_d g\) \(V_d\) = displaced vol
Pascal's Law \(F_1/A_1 = F_2/A_2\) Force multiplication
Fraction submerged \(\rho_{\text{obj}} / \rho_{\text{fluid}}\) Only if floating

Question 1 of 5

A submarine is at a depth of 200 m in seawater (\(\rho = 1025\;\text{kg/m}^3\)). What is the gauge pressure at this depth? (Use \(g = 10\;\text{m/s}^2\))

Question 2 of 5

An object with density 800 kg/m³ is placed in a fluid with density 1200 kg/m³. What fraction of the object is submerged?

Question 3 of 5

In a hydraulic system, the input piston has area 0.005 m² and the output piston has area 0.25 m². If the output must support a 10,000 N load, what input force is required?

Question 4 of 5

A steel ball (\(\rho_{\text{steel}} = 7800\;\text{kg/m}^3\)) of volume \(0.001\;\text{m}^3\) is fully submerged in water. What is the buoyant force on the ball? (\(g = 10\;\text{m/s}^2\))

Question 5 of 5

Water rises in a thin glass capillary tube because: