01 / 21

Work, Energy
and Power

Master the fundamental relationships between force and displacement, kinetic and potential energy, and power for the MCAT.

MCAT Physics

What is Work?

In physics, work is the transfer of energy that occurs when a force acts on an object and causes it to move through a displacement. Work is a scalar quantity measured in joules (J).

Positive Work
Force and displacement in the same direction: \( \theta < 90^\circ \)
Negative Work
Force opposes displacement: \( \theta > 90^\circ \) (e.g., friction)
Zero Work
Force perpendicular to displacement: \( \theta = 90^\circ \)

Visualizing Work Done by a Force

\(m\)
\(F\)
\(d\)
\(\theta\)
\(F\cos\theta\)

Types of Energy

Energy is the capacity to do work. On the MCAT, you need to master three fundamental forms of mechanical energy.

Kinetic Energy
Energy of motion: \( KE = \frac{1}{2}mv^2 \). Always positive or zero.
Gravitational PE
Energy of position: \( PE_g = mgh \). Depends on reference point.
Elastic PE
Energy stored in springs: \( PE_s = \frac{1}{2}kx^2 \). Always positive.

The Work-Energy Theorem

This is one of the most powerful tools in MCAT physics. It links forces (via work) directly to motion (via kinetic energy), bypassing the need for kinematics equations.

Net Force over distance Net Work
\(W = Fd\cos\theta\)
\(\Delta KE\)
\(\frac{1}{2}mv^2\) change

Conservation of Mechanical Energy

\(h\)
\(m\)
\(m\)
\(KE = 0\)
\(PE = mgh\)
\(KE = \frac{1}{2}mv^2\)
\(PE = 0\)
\(PE \to KE\)

As the ball rolls down, gravitational PE converts to kinetic energy. The total remains constant (no friction).

Conservative vs. Non-Conservative Forces

Conservative Non-Conservative
Path dependence Work is path-independent Work is path-dependent
Round trip work \( W = 0 \) for closed loop \( W \neq 0 \) for closed loop
Energy stored? Yes: potential energy No: energy lost as heat
Examples Gravity, springs Friction, air drag
Key equation \( KE_i + PE_i = KE_f + PE_f \) \( W_{nc} = \Delta KE + \Delta PE \)

What is Power?

Power is the rate at which work is done or energy is transferred. It tells you how fast energy changes, not just how much.

Average Power
Total work divided by total time: useful for overall processes
Instantaneous Power
Power at a specific moment: \( P = Fv \) when force is along velocity

Problem-Solving Strategy

1
Identify the system. What object(s) are you tracking? Define your reference height for PE.
2
List all forces. Classify each as conservative or non-conservative. Draw a free-body diagram.
3
Choose your equation. No friction? Use \( KE_i + PE_i = KE_f + PE_f \). Friction present? Use \( W_{nc} = \Delta KE + \Delta PE \).
4
Substitute known values. Assign initial and final states, solve for the unknown.
5
Check units and signs. Energy in joules, power in watts. Negative work means energy leaves.

Example 1: Work by an Angled Force

A student pushes a 25 kg box across a floor with a force of 80 N at \(30^\circ\) below the horizontal for a distance of 6 m. How much work does the student do?

Example 2: Conservation of Energy

A 2 kg ball is dropped from a height of 10 m. What is its speed just before hitting the ground? (Ignore air resistance; \( g = 10\;\text{m/s}^2 \))

Example 3: Work with Friction

A 5 kg block slides down a 3 m ramp (height = 2 m). Friction does -15 J of work. What is the block's speed at the bottom? (\( g = 10\;\text{m/s}^2 \))

Example 4: Calculating Power

A 70 kg person runs up a flight of stairs (height = 4 m) in 5 seconds. What is the average power output? (\( g = 10\;\text{m/s}^2 \))

Work as Area Under the Curve

When force varies with position, work equals the area under the Force vs. Displacement graph:

Displacement (m) Force (N) 2 4 6 8 10 20 30
\(W = Fd\)
\(\frac{1}{2}bh\)

Common Mistakes

✕ Forgetting the Angle
Using \( W = Fd \) instead of \( W = Fd\cos\theta \). The angle between force and displacement matters.
✕ Wrong Reference Point
Forgetting to define where \( h = 0 \) for gravitational PE. Choose a consistent reference and stick to it.
✕ Sign Errors with Work
Friction always does negative work. If you get positive work from friction, recheck your signs.
✕ Confusing Power and Energy
Power is energy per unit time. Doubling the time halves the power, even if total work is the same.
✕ Using Conservation Incorrectly
Energy conservation (\( KE_i + PE_i = KE_f + PE_f \)) only applies when there are no non-conservative forces.

Summary of Key Equations

Concept Equation Unit
Work \( W = Fd\cos\theta \) J (joule)
Kinetic Energy \( KE = \frac{1}{2}mv^2 \) J
Gravitational PE \( PE_g = mgh \) J
Elastic PE \( PE_s = \frac{1}{2}kx^2 \) J
Work-Energy Theorem \( W_{net} = \Delta KE \) J
Power (average) \( P = \frac{W}{t} \) W (watt)
Power (instantaneous) \( P = Fv\cos\theta \) W

Question 1 of 5

A horizontal force of 50 N is applied to a box, moving it 10 m along a frictionless floor. What is the work done?

Question 2 of 5

A 3 kg object is moving at 4 m/s. What is its kinetic energy?

Question 3 of 5

An object is carried horizontally at constant velocity across a room. The work done by gravity on the object is:

Question 4 of 5

A ball is dropped from height \( h \). At what height has the ball lost half of its gravitational potential energy?

Question 5 of 5

Two machines each do 1000 J of work. Machine A takes 10 s and Machine B takes 5 s. Which statement is correct?