01 / 21

Conservation of Energy
& Mechanical Advantage

Master energy conservation, work-energy theorem, and simple machines for the MCAT: from \( W = Fd \) to \( \text{MA} = \frac{F_{\text{out}}}{F_{\text{in}}} \).

MCAT Chem/Phys

What Is Energy?

Energy is the capacity to do work. In physics, work is defined as force applied over a displacement. The SI unit of energy is the joule (J), where \( 1\;\text{J} = 1\;\text{N} \cdot \text{m} \).

Kinetic Energy
Energy of motion: \( KE = \tfrac{1}{2}mv^2 \)
Potential Energy
Stored energy due to position or configuration
Work
Transfer of energy: \( W = Fd\cos\theta \)

Forms of Mechanical Energy

\( m \)
\( m \)
\( h \)
\( PE = mgh \)
\( KE = 0 \)
\( KE = \frac{1}{2}mv^2 \)
\( PE = 0 \)
\( v \)

Why This Matters for the MCAT

The MCAT Chem/Phys section tests your ability to apply energy conservation to biological and physical systems. Understanding mechanical advantage helps you analyze musculoskeletal levers, cardiovascular pressure, and fluid dynamics.

1
Foundational Concept 4A: translational motion, forces, work, energy, and equilibrium in living systems.
2
Passage-based problems frequently embed energy conservation in ramps, pulleys, and biological levers.
3
Mechanical advantage appears in questions about the human body as a system of simple machines.

The Law of Energy Conservation

$$ E_{\text{total}} = KE + PE = \text{constant} $$

$$ \tfrac{1}{2}mv_i^2 + mgh_i = \tfrac{1}{2}mv_f^2 + mgh_f $$

The Work-Energy Theorem

$$ W_{\text{net}} = \Delta KE = \tfrac{1}{2}mv_f^2 - \tfrac{1}{2}mv_i^2 $$

The net work done on an object equals its change in kinetic energy. This is a direct consequence of Newton's second law integrated over displacement.

\( m \)
\( F \)
\( d \)
\( m \)
\( v \)
=

Conservative vs Non-Conservative Forces

Conservative Non-Conservative
Path dependence Path-independent Path-dependent
Round trip work \( W = 0 \) for closed loop \( W \neq 0 \) for closed loop
Has a PE function? Yes No
Examples Gravity, springs Friction, air drag
Energy effect Converts KE ↔ PE Converts ME to heat

Power: The Rate of Energy Transfer

$$ P = \frac{W}{t} = \frac{\Delta E}{t} = Fv\cos\theta $$

Unit
Watt (W) = \( \text{J}/\text{s} \)
Average Power
\( P_{\text{avg}} = W/t \)
Instantaneous
\( P = \vec{F} \cdot \vec{v} \)

What Is Mechanical Advantage?

Mechanical advantage (MA) measures how much a simple machine multiplies an input force. It allows you to exert a smaller force over a larger distance to accomplish the same work.

$$ \text{MA} = \frac{F_{\text{out}}}{F_{\text{in}}} = \frac{d_{\text{in}}}{d_{\text{out}}} $$

Simple Machines & Lever Classes

Class 1 F Load Effort e.g., seesaw Class 2 F Load Effort e.g., wheelbarrow Class 3 F Load Effort e.g., biceps curl Inclined Plane
\( h \)
\( L \)
\( \text{MA} = \frac{L}{h} \)
Pulley System Effort Load
\( \text{MA} = 2 \)

Efficiency: Real vs Ideal Machines

$$ \text{Efficiency} = \frac{W_{\text{out}}}{W_{\text{in}}} \times 100\% = \frac{\text{AMA}}{\text{IMA}} \times 100\% $$

IMA
Ideal Mechanical Advantage: \( d_{\text{in}}/d_{\text{out}} \). Assumes no friction.
AMA
Actual Mechanical Advantage: \( F_{\text{out}}/F_{\text{in}} \). Includes friction losses.

How to Solve Energy Problems

1
Define the system and identify all forms of energy present (KE, gravitational PE, spring PE, thermal).
2
Choose two states (initial and final) and set a reference point for \( h = 0 \).
3
Write the energy equation: \( KE_i + PE_i + W_{\text{nc}} = KE_f + PE_f \).
4
Substitute known values and solve for the unknown. Cancel masses if possible.
5
Check units and reasonableness. Speeds should be positive, heights should make physical sense.

Example 1: Roller Coaster

A 50 kg cart starts from rest at height \( h = 20\;\text{m} \). What is its speed at the bottom?

20 m
\( h = 0 \)
\( v = ? \)
\( v = 0 \)

Example 2: Inclined Plane with Friction

A 10 kg box slides down a 5 m ramp (height = 3 m). Friction does \(-100\;\text{J}\) of work. Find the speed at the bottom.

Example 3: Pulley Mechanical Advantage

A system of 2 supporting ropes is used to lift a 200 N load a height of 2 m. What force must you apply, and how far must you pull?

Pull
\(200\,\text{N}\)
\( \text{MA} = 2 \)

Common Mistakes to Avoid

✕ Forgetting Reference Point
PE depends on your choice of \( h = 0 \). Pick a consistent reference and stick with it throughout the problem.
✕ Ignoring Friction
Real problems include non-conservative forces. Omitting \( W_{\text{nc}} \) gives an answer that is too high.
✕ Confusing MA with Efficiency
MA is a force ratio. Efficiency compares useful work output to total work input. They are related but not the same.

Question 1 of 5

A 2 kg ball is dropped from a height of 45 m. Neglecting air resistance, what is its speed just before hitting the ground? (Use \( g = 10\;\text{m/s}^2 \))

Question 2 of 5

Which of the following is a non-conservative force?

Question 3 of 5

An ideal inclined plane has a length of 10 m and a height of 2 m. What is its mechanical advantage?

Question 4 of 5

A machine has an IMA of 6 and an AMA of 4.5. What is its efficiency?

Question 5 of 5

A Class 3 lever (like the human forearm) always has a mechanical advantage that is: