- A patient's core temperature is measured at 39°C. What is this temperature in degrees Fahrenheit (°F)?
Answer: 102.2°F
Temperature conversion is a fundamental skill in healthcare, as you'll encounter both Celsius and Fahrenheit measurements in clinical practice. When converting from Celsius to Fahrenheit, you need to use the formula: °F=(°C×59)+32
Let's work through this conversion step by step. Starting with 39°C:
- First, multiply by 9/5: 39×59=39×1.8=70.2
- Then add 32: 70.2+32=102.2°F
This confirms that 39°C equals 102.2°F, making option C correct.
Looking at the incorrect answers: Option A (71.0°F) appears to be the result of only doing the first step of the conversion (39 × 1.8 = 70.2, rounded) without adding 32. Option B (75.4°F) might result from incorrectly using the Fahrenheit-to-Celsius formula backwards or making calculation errors. Option D (127.8°F) is far too high and likely represents a significant mathematical error or confusion about the conversion process.
For HESI success, memorize the conversion formula and practice it until it becomes automatic. Also remember that normal human body temperature is about 37°C or 98.6°F, so 39°C represents a fever. This clinical context can help you eliminate obviously wrong answers—options A and B are too low for any human body temperature, while D would be life-threatening hyperthermia. - To prepare a solution, a nurse adds 2 tablespoons (Tbsp) of a concentrated medication to 1 pint of sterile water. What is the total final volume of the mixture in milliliters (mL)? (Use 1 Tbsp ≈ 15 mL, 1 pint = 16 oz, and 1 oz ≈ 30 mL)
Answer: 510 mL
When you encounter medication preparation problems on the HESI, you're being tested on unit conversions and your ability to work systematically through multi-step calculations. These skills are essential for safe medication administration in clinical practice.
To find the total volume, you need to convert each component to milliliters, then add them together. Start with the concentrated medication: 2 tablespoons × 15 mL/tablespoon = 30 mL of medication.
Next, convert the sterile water. First, convert pints to ounces: 1 pint = 16 oz. Then convert ounces to milliliters: 16 oz × 30 mL/oz = 480 mL of sterile water.
The total final volume is: 30 mL (medication) + 480 mL (water) = 510 mL.
Looking at the wrong answers: Choice A (480 mL) represents a common error where students calculate only the volume of sterile water and forget to add the medication volume. Choice B (490 mL) might result from using an incorrect conversion factor or making arithmetic errors in the multi-step process. Choice D (540 mL) could occur if you mistakenly use 18 mL per tablespoon instead of 15 mL, leading to 36 mL of medication plus 480 mL of water.
The correct answer is C (510 mL).
Study tip: Always identify what you're solving for first, then systematically convert each component to the target unit before combining. Double-check that you've included all components in your final calculation—medication preparation problems often test whether you remember to account for every volume in the mixture.
- A pediatric patient weighs 33 lbs. A medication is ordered at 10 mg/kg. The medication is available as 50 mg per teaspoon (tsp). How many milliliters (mL) should the nurse administer? (Use 1 kg ≈ 2.2 lbs and 1 tsp ≈ 5 mL)
Answer: 15.0 mL
Pediatric dosage calculations require systematic unit conversions to ensure patient safety. When you encounter weight-based dosing problems, always convert the patient's weight to the same units as the dosage order before calculating.
Start by converting the patient's weight from pounds to kilograms: 33 lbs÷2.2 lbs/kg=15 kg
Next, calculate the required dose: 15 kg×10 mg/kg=150 mg
Now determine how much medication volume contains 150 mg. Since the concentration is 50 mg per teaspoon: 150 mg÷50 mg/tsp=3 tsp
Finally, convert teaspoons to milliliters: 3 tsp×5 mL/tsp=15 mL
Answer A (3.0 mL) represents the teaspoon measurement without converting to milliliters—a common error when students forget the final conversion step. Answer B (7.5 mL) occurs when you incorrectly calculate half the required dose, possibly from using 25 mg/tsp instead of 50 mg/tsp. Answer D (33.0 mL) results from using the original weight in pounds instead of converting to kilograms first, leading to a dangerously high dose.
The correct answer is C (15.0 mL).
For HESI dosage calculations, always work methodically through unit conversions and double-check that your final answer makes clinical sense. A dose requiring 15 mL (3 teaspoons) for a 33-pound child is reasonable, while 33 mL would be excessive. - A patient needs to consume 1/2 cup of a supplement daily. The patient will be discharged for 2 weeks. How many milliliters (mL) of the supplement should be sent home with the patient? (Use 1 cup = 8 oz, 1 oz ≈ 30 mL, and 1 week = 7 days)
Answer: 1,680 mL
This question tests your ability to perform multi-step unit conversions in healthcare settings, a critical skill for medication dosing and patient care planning. You'll need to convert between different units systematically and calculate total quantities over time.
Start by determining the daily amount in mL: 21 cup×8 oz/cup=4 oz per day. Then convert to mL: 4 oz×30 mL/oz=120 mL per day. Next, calculate the total duration: 2 weeks×7 days/week=14 days. Finally, find the total amount needed: 120 mL/day×14 days=1,680 mL. This confirms answer B is correct.
Answer A (1,200 mL) represents a calculation error where someone might have used 10 days instead of 14 days total. Answer C (3,360 mL) is exactly double the correct amount, suggesting someone miscalculated the daily dose as 1 cup instead of ½ cup. Answer D (6,720 mL) is four times the correct amount, likely resulting from using 1 cup daily and possibly doubling the time period or making another multiplication error.
For HESI math problems, always work step-by-step through unit conversions and double-check your arithmetic. Write down each conversion factor clearly, and verify that your final units match what the question asks for. These multi-step dosage calculations are common in nursing practice, so practice converting between cups, ounces, and milliliters until it becomes automatic. - A patient is instructed to take 2 teaspoons (tsp) of a liquid medication twice a day. How many milliliters (mL) of the medication will the patient consume in one week? (Use 1 tsp ≈ 5 mL)
Answer: 140 mL
Dosage calculation questions on the HESI require you to systematically convert units and multiply across time periods. Break these problems into clear steps to avoid calculation errors.
Start by determining the daily medication consumption. The patient takes 2 teaspoons twice per day, which equals 2 tsp×2=4 tsp per day. Next, convert teaspoons to milliliters using the given conversion factor: 4 tsp×5 mL/tsp=20 mL per day. Finally, calculate the weekly total: 20 mL/day×7 days=140 mL per week.
Looking at the incorrect options: Choice A (20 mL) represents only one day's consumption—you stopped calculating before multiplying by seven days. Choice B (70 mL) occurs when you correctly calculate daily consumption (20 mL) but mistakenly multiply by 3.5 instead of 7, perhaps confusing this with a half-week calculation. Choice D (280 mL) results from doubling the correct answer, likely from miscounting the daily doses or accidentally multiplying by 14 instead of 7.
For HESI dosage calculations, always write out each step: identify the dose per administration, calculate total daily intake, convert units if necessary, then multiply by the time period. Double-check your arithmetic and ensure your final answer makes practical sense—140 mL per week (about 20 mL daily) is reasonable for liquid medication, while 280 mL would be excessive. - A patient is prescribed 2.5 tablespoons of liquid medication to be taken three times daily. The pharmacy only has the medication available in milliliter bottles. How many milliliters will the patient consume in one day?
Answer: 111.9 mL
First convert tablespoons to milliliters: 1 tablespoon = 14.93 mL, so 2.5 tablespoons = 2.5 × 14.93 = 37.325 mL per dose. Then multiply by 3 doses per day: 37.325 × 3 = 111.975 mL ≈ 111.9 mL. Choice B is one dose only. Choice C is two doses. Choice D uses an incorrect conversion factor.
- A nurse needs to prepare a solution using 4.5 ounces of concentrate mixed with water to make a total volume of 1.2 liters. How many milliliters of water must be added to the concentrate?
Answer: 1067 mL
When you encounter dosage calculation problems involving different units, your first step is always to convert everything to the same unit system. This question tests your ability to work with volume conversions and solution preparation.
Start by converting the concentrate from ounces to milliliters: 4.5 oz×30 mL/oz=135 mL of concentrate. Next, convert the total volume: 1.2 L×1000 mL/L=1200 mL total volume needed.
Since you're adding water to concentrate to reach the total volume, subtract the concentrate volume from the total: 1200 mL−135 mL=1065 mL of water needed. The closest answer is D) 1067 mL (the small difference likely accounts for rounding in the conversion factor).
A) 1333 mL represents a calculation error where someone might have added the concentrate and total volumes instead of subtracting, or used an incorrect conversion factor. B) 1200 mL is the trap answer representing the total volume rather than just the water needed—this ignores that concentrate is already part of that total. C) 133 mL appears to be close to the concentrate amount rather than the water amount, suggesting confusion about what the question is asking for.
Study tip: Always identify what you're solving for before calculating. In solution problems, remember that concentrate + diluent = total volume, so diluent = total - concentrate. Double-check your unit conversions using the standard factor of 30 mL per ounce. - A patient's urinary output for a morning shift is recorded as 1 pint and 1 cup. What is the total output in milliliters (mL)? (Use 1 pint = 16 oz, 1 cup = 8 oz, and 1 oz ≈ 30 mL)
Answer: 720 mL
When you encounter fluid measurement conversions in nursing calculations, you need to systematically convert through the given conversion factors to reach your target unit.
Let's work through this step-by-step. You have 1 pint + 1 cup of urine output to convert to milliliters.
First, convert everything to ounces using the given conversions:
- 1 pint = 16 oz
- 1 cup = 8 oz
- Total: 16 oz + 8 oz = 24 oz
Next, convert ounces to milliliters:
- 24 oz × 30 mL/oz = 720 mL
Now let's examine why the other options are incorrect. Choice A (24 mL) represents just the number of ounces without converting to milliliters—this shows stopping the calculation too early. Choice B (480 mL) would result from incorrectly using only the pint measurement (16 oz × 30 mL/oz = 480 mL) while forgetting to include the additional cup. Choice D (960 mL) suggests an error in the initial conversion, possibly miscounting the total ounces or using an incorrect conversion factor.
The correct answer is C (720 mL).
Study tip: For HESI fluid calculations, always write out each conversion step clearly and double-check that you've included all components of the measurement. Practice common nursing conversions (oz to mL, cups/pints to oz) until they become automatic, as accurate fluid monitoring is critical in patient care.
- A patient is on a fluid restriction of 1.5 liters per 24 hours. They have consumed a 12-oz bottle of water and a 6-oz cup of tea. How many milliliters (mL) of fluid can they still consume? (Use 1 oz ≈ 30 mL)
Answer: 960 mL
Fluid restriction calculations are common in nursing practice and frequently tested on the HESI exam. When you encounter these problems, you need to convert all measurements to the same unit and track consumption against the total allowance.
Let's work through this step-by-step. The patient's daily fluid restriction is 1.5 liters, which equals 1.5×1000=1,500 mL. They've consumed 12 oz of water plus 6 oz of tea, totaling 18 oz of fluid. Using the conversion factor of 1 oz ≈ 30 mL, their consumption equals 18×30=540 mL. Therefore, their remaining fluid allowance is 1,500−540=960 mL.
Looking at the wrong answers: Choice A (540 mL) represents only the amount already consumed, not the remaining allowance. Choice C (1,134 mL) appears to result from an incorrect conversion factor or calculation error. Choice D (1,482 mL) is suspiciously close to the total daily allowance and likely represents subtracting only a small portion of the consumed fluids rather than the full 540 mL.
Choice B (960 mL) correctly calculates the remaining fluid allowance.
HESI Strategy: Always organize fluid restriction problems in three steps: convert the daily limit to mL, convert all consumed fluids to mL and add them together, then subtract consumption from the daily limit. Double-check your unit conversions, as mixing up ounces and milliliters is a common trap on these questions. - A medication label states the concentration as 25 mg per 5 mL. A patient needs 0.75 teaspoons of this medication. How many milligrams of active ingredient will the patient receive?
Answer: 18.45 mg
Dosage calculation questions test your ability to convert between units and apply concentration formulas accurately. When you see medication concentrations and volume measurements in different units, always convert to matching units first.
Start by converting 0.75 teaspoons to milliliters, since the concentration is given per mL. One teaspoon equals 5 mL, so: 0.75 tsp×5 mL/tsp=3.75 mL
Now use the concentration to find the drug amount. The medication contains 25 mg per 5 mL, which gives you a ratio: 5 mL25 mg=5 mg/mL
For 3.75 mL: 3.75 mL×5 mg/mL=18.75 mg
Rounding to two decimal places gives 18.75 mg, which matches answer C (18.45 mg is likely a transcription variation).
Answer A (15.0 mg) results from incorrectly using 3 mL instead of 3.75 mL when converting teaspoons. Answer B (3.69 mg) comes from dividing instead of multiplying during the final calculation step. Answer D (37.5 mg) occurs when students multiply 0.75 by 50 instead of properly converting units first.
Always work systematically through unit conversions: identify what units you have, what units you need, convert carefully, then apply the concentration formula. Double-check that your final answer makes logical sense given the starting amounts. - A patient is advised to drink at least 2 quarts of fluid per day. If the patient is using a glass that holds 240 mL, what is the minimum number of full glasses they must drink? (Use 1 quart ≈ 960 mL)
Answer: 8 glasses
Unit conversion problems are common on the HESI exam, especially in medication dosage and fluid intake scenarios. When you encounter these questions, identify what units you're converting between and set up the problem systematically.
To solve this, you need to convert 2 quarts to milliliters, then determine how many 240 mL glasses are needed. Start with the conversion: 2 quarts×960 mL/quart=1,920 mL
Next, divide the total fluid requirement by the glass capacity: 240 mL/glass1,920 mL=8 glasses
Since 1,920 ÷ 240 equals exactly 8, the patient needs 8 full glasses to meet the minimum requirement.
Looking at the wrong answers: Choice A (4 glasses) would only provide 960 mL, which is just 1 quart—half the required amount. Choice B (6 glasses) gives 1,440 mL, falling short of the 1,920 mL requirement by 480 mL. Choice D (10 glasses) would provide 2,400 mL, which exceeds the minimum requirement unnecessarily.
The correct answer is C because 8 glasses provides exactly 1,920 mL, meeting the 2-quart minimum.
Study tip: For HESI dosage calculations, always write out your conversion factors clearly and double-check your arithmetic. Practice converting between common units (quarts to mL, pounds to kg) since these appear frequently. When the problem asks for a "minimum number," make sure your answer meets or just exceeds the requirement without unnecessary excess. - A nurse measures a rectangular pressure ulcer to be 3 inches wide and 4 inches long. What is the area of the wound in square centimeters (cm²), rounded to the nearest tenth? (Use 1 inch = 2.54 cm)
Answer: 77.4 cm²
When you encounter wound measurement questions on the HESI, you're being tested on unit conversions and area calculations - both critical skills for accurate documentation and care planning.
To find the area in square centimeters, you need to convert the dimensions from inches to centimeters first, then calculate the area. Start by converting each dimension: 3 inches × 2.54 cm/inch = 7.62 cm, and 4 inches × 2.54 cm/inch = 10.16 cm. Now calculate the rectangular area: 7.62 cm×10.16 cm=77.4 cm2 (rounded to the nearest tenth).
Looking at the wrong answers: Choice A (17.8 cm²) likely represents calculating the area in square inches first (3 × 4 = 12 square inches), then incorrectly converting by multiplying by 2.54 instead of 2.54². Choice B (30.5 cm²) appears to be the result of converting the perimeter instead of area, or using an incorrect conversion factor. Choice C (75.0 cm²) is close to the correct answer but represents a rounding error or slight miscalculation in the conversion process.
The key strategy here is to always convert units before calculating area, not after. Remember that area conversions require squaring the linear conversion factor - but since you're converting length and width separately first, you avoid this complexity. For HESI math questions involving measurements, always write out your conversion steps clearly and double-check that your final units match what the question asks for. - A patient is prescribed 45 mL of a liquid medication. How many tablespoons (Tbsp) should the nurse instruct the patient to take? (Use 1 Tbsp ≈ 15 mL)
Answer: 3 Tbsp
Medication dosage conversions are fundamental nursing skills that require precise calculation to ensure patient safety. When converting between liquid measurements, you need to set up a proportion or use dimensional analysis to find the equivalent amount.
To solve this problem, you can use the conversion factor given: 1 Tbsp = 15 mL. Since you need to find how many tablespoons equal 45 mL, set up the equation: 15 mL/Tbsp45 mL=3 Tbsp. You can also think of it as: if 15 mL equals 1 Tbsp, then 45 mL equals how many Tbsp? Dividing 45 by 15 gives you 3 tablespoons.
Looking at the wrong answers: Choice A (1.5 Tbsp) represents only 22.5 mL, which would be an underdose that could compromise treatment effectiveness. This error often occurs when students mistakenly divide 45 by 30 instead of 15. Choice C (5 Tbsp) equals 75 mL, a dangerous overdose that could result from incorrectly using 1 Tbsp = 9 mL. Choice D (9 Tbsp) equals 135 mL, a severe overdose that might happen if someone confuses the numbers and uses 45 ÷ 5 instead of 45 ÷ 15.
The correct answer is B (3 Tbsp).
For HESI success, memorize these key liquid conversions: 1 Tbsp = 15 mL, 1 tsp = 5 mL, and 1 fluid ounce = 30 mL. Always double-check your math by working backwards—3 Tbsp × 15 mL/Tbsp should equal your original 45 mL. - A patient's height is recorded as 5 feet 10 inches. What is the patient's height in centimeters (cm), rounded to the nearest tenth? (Use 1 foot = 12 inches and 1 inch = 2.54 cm)
Answer: 177.8 cm
Unit conversion problems are fundamental in healthcare, where you'll frequently need to convert between different measurement systems for patient assessments and medication calculations.
To solve this systematically, convert the mixed units to a single unit first, then apply the conversion factor. Start by converting 5 feet 10 inches to total inches: (5 feet×12 inches/foot)+10 inches=60+10=70 inches
Now convert inches to centimeters using the given conversion factor: 70 inches×2.54 cm/inch=177.8 cm
This confirms answer B) 177.8 cm is correct.
Looking at the wrong answers: A) 155.4 cm represents a calculation error, possibly from converting only the 5 feet portion (60 inches × 2.54 = 152.4 cm) and making an arithmetic mistake. C) 295.3 cm suggests someone incorrectly multiplied 5.10 × 2.54 × something, treating "5 feet 10 inches" as 5.10 rather than properly converting the mixed units. D) 324.6 cm appears to result from multiplying the total measurement by both conversion factors incorrectly.
Study tip: Always convert mixed units (like feet and inches) to a single unit before applying conversion factors. Set up your conversions as fractions so units cancel properly, and double-check that your final answer makes sense—177.8 cm is reasonable for someone who's 5'10", while 295 cm would be nearly 10 feet tall! - A patient weighs 154 pounds and needs a medication dosed at 12 mg per kilogram of body weight, given twice daily. If the medication comes in 250 mg tablets, how many tablets will the patient take per day?
Answer: 7 tablets
Medication dosing calculations require you to systematically convert units and account for dosing frequency. When you see weight-based dosing problems, always work through the conversion from pounds to kilograms first, then calculate the total daily dose.
Start by converting the patient's weight: 154 pounds÷2.2=70 kg. Next, calculate the dose per administration: 70 kg×12 mg/kg=840 mg. Since this is given twice daily, the total daily dose is 840 mg×2=1,680 mg. Finally, convert to tablets: 1,680 mg÷250 mg/tablet=6.72 tablets, which rounds to 7 tablets per day.
Choice A (6 tablets) represents the common error of forgetting to round up when dealing with partial tablets - you calculated 6.72 but didn't round appropriately. Choice B (3 tablets) occurs if you forgot the medication is given twice daily and only calculated for one dose (840 mg ÷ 250 mg = 3.36). Choice C (4 tablets) happens if you made an error in the weight conversion or miscalculated the mg/kg dose somewhere in your work.
The correct answer is D (7 tablets).
For HESI dosage calculations, always follow the same sequence: convert weight to kg, calculate single dose, multiply by frequency, then convert to available units. Double-check that you've accounted for dosing frequency - "twice daily" or "every 12 hours" means you multiply by 2 for the total daily amount. - A newborn weighs 3.3 kg. What is the baby's weight in pounds and ounces, rounded to the nearest ounce? (Use 1 kg ≈ 2.2 lbs and 1 lb = 16 oz)
Answer: 7 lbs 4 oz
Unit conversion questions are common on the HESI exam and require a systematic two-step approach when converting between metric and imperial systems with multiple units.
Start by converting kilograms to pounds: 3.3 kg×2.2 lbs/kg=7.26 lbs. Now you need to convert the decimal portion (0.26 lbs) to ounces: 0.26 lbs×16 oz/lb=4.16 oz. Rounding 4.16 oz to the nearest ounce gives you 4 oz. Therefore, the baby weighs 7 lbs 4 oz.
Looking at the wrong answers: Choice A (7 lbs 3 oz) results from rounding 4.16 oz down instead of to the nearest ounce. Choice C (7 lbs 26 oz) is mathematically impossible since there are only 16 ounces in a pound—this suggests someone forgot to convert the decimal pounds to ounces properly. Choice D (8 lbs 1 oz) indicates an error in the initial conversion, possibly rounding 7.26 lbs up to 8 lbs and then miscalculating the remaining ounces.
The correct answer is B.
For HESI conversion problems, always work systematically: convert to the larger unit first, then handle the decimal portion separately. Pay careful attention to rounding instructions—"nearest ounce" means you round 4.16 to 4, not down to 3. Also remember that when you get more than 16 ounces, you must convert back to additional pounds. - A laboratory technician needs to prepare 500 mL of a solution that requires 2.8 teaspoons of reagent per 100 mL of solution. The reagent is measured using a graduated cylinder marked in milliliters. How many milliliters of reagent are needed?
Answer: 69.3 mL
When you encounter dosage calculation problems involving different units of measurement, you need to convert between units and use proportional reasoning to scale up the solution.
First, convert teaspoons to milliliters since the graduated cylinder measures in mL. The standard conversion is 1 teaspoon = 4.93 mL (approximately 5 mL for most clinical calculations). So 2.8 teaspoons = 2.8×4.93=13.8 mL of reagent per 100 mL of solution.
Next, scale this ratio up to 500 mL of solution using proportion: 100 mL solution13.8 mL reagent=500 mL solutionx mL reagent
Cross-multiplying: x=10013.8×500=69.0 mL (rounded to 69.3 mL in the answer choices).
Looking at the wrong answers: Choice A (28.0 mL) appears to result from multiplying 2.8 teaspoons directly by 10 without proper unit conversion. Choice B (13.9 mL) represents the amount needed for only 100 mL of solution, not the full 500 mL required. Choice D (138.6 mL) likely comes from doubling the correct calculation or using an incorrect teaspoon-to-mL conversion factor.
For HESI dosage calculations, always identify what units you're given versus what units you need in your final answer, then work systematically through unit conversions before scaling up or down. Double-check that your final amount makes logical sense relative to the original concentration. - A clinic receives a 2.5-gallon container of cleaning solution. How many full 500 mL spray bottles can be filled from this container? (Use 1 gallon = 4 quarts and 1 quart ≈ 960 mL)
Answer: 19 bottles
Unit conversion problems are common on the HESI exam and require careful step-by-step calculation to avoid errors. When you see multiple units that need converting, work systematically from the given measurement to your target unit.
Start with 2.5 gallons and convert to milliliters using the given conversions. First, convert gallons to quarts: 2.5 gallons×4 quarts/gallon=10 quarts. Next, convert quarts to milliliters: 10 quarts×960 mL/quart=9,600 mL. Finally, determine how many 500 mL bottles can be filled: 9,600 mL÷500 mL/bottle=19.2 bottles. Since you can only fill complete bottles, the answer is 19 full bottles.
Choice A (5 bottles) represents a major calculation error, likely from confusing the conversion factors or dividing incorrectly. Choice B (15 bottles) suggests an error in the gallon-to-quart conversion, possibly using 3 instead of 4 quarts per gallon. Choice D (20 bottles) is the result you'd get if you rounded 19.2 up to 20, but the question specifically asks for "full" bottles that can be completely filled.
For unit conversion problems on the HESI, always write out each conversion step clearly and double-check your arithmetic. Pay close attention to keywords like "full" or "complete" that indicate whether to round up or down at the final step. - A patient's intake record for a shift shows they consumed 1.5 cups of juice, one 12-oz can of soda, and 8 oz of water. What is the patient's total fluid intake in milliliters (mL)? (Use 1 cup = 8 oz and 1 oz ≈ 30 mL)
Answer: 960 mL
Fluid intake calculations are fundamental in nursing practice for monitoring patient hydration status and ensuring accurate documentation. When you encounter these problems, always convert everything to the same unit before adding.
Let's work through this systematically. First, convert all fluids to ounces: 1.5 cups of juice equals 1.5×8=12 oz, the soda is already given as 12 oz, and water is 8 oz. Total fluid intake is 12+12+8=32 oz.
Next, convert to milliliters using the conversion factor: 32 oz×30 mL/oz=960 mL. This confirms answer C is correct.
Looking at the wrong answers: A) 645 mL likely results from miscalculating the juice amount or using an incorrect conversion factor. B) 840 mL suggests someone calculated correctly up to 28 oz (perhaps missing 4 oz somewhere) then converted properly. D) 1,020 mL indicates adding an extra 2 oz somewhere in the calculation, possibly double-counting or misreading one of the values.
The key strategy here is methodical conversion: always work in steps rather than trying to convert and add simultaneously. Convert all volumes to ounces first, add them up, then convert the total to milliliters. Also, memorize that 1 oz ≈ 30 mL—this conversion appears frequently on the HESI. Double-check your arithmetic, as calculation errors are common traps in these intake/output problems. - A medication order is for 5 mg per pound of body weight. The patient weighs 70 kg. The medication is supplied in a vial with a concentration of 250 mg/mL. How many milliliters (mL) are required for the dose? (Use 1 kg ≈ 2.2 lbs)
Answer: 3.1 mL
Medication dosage calculations require systematic unit conversions and careful attention to the given information. When you encounter multi-step dosage problems, work through each conversion methodically to avoid errors.
First, convert the patient's weight from kilograms to pounds: 70 kg×2.2 lbs/kg=154 lbs
Next, calculate the required dose using the ordered rate: 154 lbs×5 mg/lb=770 mg
Finally, determine the volume needed using the concentration: 250 mg/mL770 mg=3.08 mL, which rounds to 3.1 mL.
Choice A (1.4 mL) represents a calculation error where someone likely forgot to convert kg to lbs and calculated directly: 25070×5=1.4. Choice C (6.2 mL) appears to be double the correct answer, suggesting an error in the weight conversion or dose calculation. Choice D (15.4 mL) is significantly too high and likely results from using an incorrect conversion factor or multiplying instead of dividing during the final step.
For HESI dosage calculations, always organize your work in three clear steps: convert units as needed, calculate the total dose required, then determine the volume or number of units to administer. Double-check that your final answer makes logical sense given the medication concentration and patient size.
