01 / 21

Logistic Growth
& Carrying Capacity

Master the S-curve of population growth: from the logistic differential equation to equilibrium solutions and inflection points.

AP Calculus Differential Equations

What Is Population Growth?

When a species reproduces, its population changes over time. We model this with a differential equation that describes the rate of change \(\frac{dP}{dt}\) as a function of the current population \(P\).

\(P(t)\)
Population at time \(t\)
\(\frac{dP}{dt}\)
Rate of population change
\(K\)
Carrying capacity of the environment

From Exponential to Logistic

Exponential growth assumes unlimited resources: \(\frac{dP}{dt} = rP\). This gives unbounded growth. In reality, environments have finite resources, so we introduce a correction factor.

Understanding Carrying Capacity \(K\)

The carrying capacity \(K\) is the maximum population an environment can sustain indefinitely. It depends on available food, water, habitat space, and other resources.

1
When \(P \ll K\): Resources are abundant, growth is nearly exponential.
2
When \(P \approx K\): Resources are scarce, growth slows dramatically.
3
When \(P = K\): Growth rate is zero: the population is at equilibrium.

The Logistic Equation

The logistic differential equation is:

\(r\)
Intrinsic growth rate (per capita rate when \(P\) is small)
\(K\)
Carrying capacity: maximum sustainable population
\(1 - \frac{P}{K}\)
Correction factor that slows growth as \(P \to K\)

The Analytic Solution

Separating variables and integrating the logistic ODE yields the closed-form solution:

\(P_0 = P(0)\) is the initial population. As \(t \to \infty\), the exponential term vanishes and \(P(t) \to K\).

Anatomy of the S-Curve

Phase 1
Near-exponential growth when \(P \ll K\)
Phase 2
Fastest growth at inflection point \(P = K/2\)
Phase 3
Growth decelerates as \(P \to K\)

The Inflection Point

The inflection point of the logistic curve occurs where the growth rate \(\frac{dP}{dt}\) is maximized. Setting \(\frac{d^2P}{dt^2} = 0\) gives:

At \(P = K/2\), the curve changes from concave up (accelerating) to concave down (decelerating). This is the steepest point of the S-curve.

Equilibrium Solutions

Equilibrium points occur where \(\frac{dP}{dt} = 0\). From \(rP\!\left(1 - \frac{P}{K}\right) = 0\), we get:

\(P = 0\)
Unstable equilibrium: any small positive perturbation causes \(P\) to grow away from 0.
\(P = K\)
Stable equilibrium: populations above or below \(K\) are pushed back toward \(K\).

Exponential vs Logistic

Property Exponential Logistic
ODE \(\frac{dP}{dt} = rP\) \(\frac{dP}{dt} = rP\!\left(1 - \frac{P}{K}\right)\)
Solution \(P = P_0 e^{rt}\) \(P = \frac{K}{1 + Ae^{-rt}}\)
Long-term \(P \to \infty\) \(P \to K\)
Inflection None At \(P = K/2\)
Realism Short-term only Resource-limited

How to Solve Logistic Problems

1
Identify parameters: Extract \(r\), \(K\), and \(P_0\) from the problem statement.
2
Compute \(A\): Use \(A = \frac{K - P_0}{P_0}\) from the initial condition.
3
Write the solution: \(P(t) = \frac{K}{1 + Ae^{-rt}}\).
4
Answer the question: Evaluate \(P(t)\) at the requested time, or find \(t\) when \(P\) reaches a target value.
5
Check behavior: Verify \(P(0) = P_0\) and \(\lim_{t\to\infty} P(t) = K\).

Example 1: Fish Population

A lake supports at most \(K = 1000\) fish. The initial population is \(P_0 = 100\) and the intrinsic growth rate is \(r = 0.5\) per year. Find \(P(t)\).

1
Parameters: \(r = 0.5\), \(K = 1000\), \(P_0 = 100\).
2
Compute \(A\): \(A = \frac{1000 - 100}{100} = 9\).
3
Solution: \(P(t) = \frac{1000}{1 + 9e^{-0.5t}}\).

Example 2: Finding a Time

Using the fish population from Example 1, when does the population reach 500 fish?

1
Set up: \(500 = \frac{1000}{1 + 9e^{-0.5t}}\).
2
Solve for the exponential: \(1 + 9e^{-0.5t} = 2\), so \(9e^{-0.5t} = 1\).
3
Isolate \(t\): \(e^{-0.5t} = \frac{1}{9}\), giving \(-0.5t = \ln\!\left(\frac{1}{9}\right) = -\ln 9\).
4
Result: \(t = 2\ln 9 \approx 4.39\) years.

Example 3: Growth Rate at a Point

A population follows \(\frac{dP}{dt} = 0.3P\!\left(1 - \frac{P}{800}\right)\). What is the growth rate when \(P = 200\)?

1
Substitute: \(\frac{dP}{dt} = 0.3(200)\!\left(1 - \frac{200}{800}\right)\).
2
Simplify: \(= 60\!\left(1 - 0.25\right) = 60(0.75) = 45\).

Common Mistakes

✕ Forgetting the factor \(\left(1 - \frac{P}{K}\right)\)
Without it, the model becomes exponential and diverges. Always include the limiting term.
✕ Wrong sign in the exponent
The solution has \(e^{-rt}\) (negative exponent). Using \(e^{rt}\) makes \(P \to \infty\) instead of \(K\).
✕ Inflection at \(P = K\)
The inflection point is at \(P = K/2\), not at the carrying capacity. At \(P = K\), the growth rate is zero.

Key Formulas Summary

Concept Formula / Value
Logistic ODE \(\frac{dP}{dt} = rP\!\left(1 - \frac{P}{K}\right)\)
Solution \(P(t) = \frac{K}{1 + Ae^{-rt}}\)
Constant \(A\) \(A = \frac{K - P_0}{P_0}\)
Inflection point \(P = K/2\)
Max growth rate \(\frac{rK}{4}\)
Stable equilibrium \(P = K\)
Unstable equilibrium \(P = 0\)

Question 1 of 5

What is the carrying capacity in the equation \(\frac{dP}{dt} = 0.4P\!\left(1 - \frac{P}{500}\right)\)?

Question 2 of 5

At what population level does the logistic growth rate reach its maximum?

Question 3 of 5

Given \(K = 600\) and \(P_0 = 50\), what is the value of the constant \(A\) in the logistic solution?

Question 4 of 5

If \(\frac{dP}{dt} = 0.2P\!\left(1 - \frac{P}{1000}\right)\) and \(P = 300\), what is \(\frac{dP}{dt}\)?

Question 5 of 5

What happens to a population modeled by the logistic equation if \(P_0 > K\)?