Forced Oscillations
& Resonance
Explore how external periodic forces drive oscillating systems, and discover the dramatic phenomenon of resonance where amplitude peaks.
What Is a Damped Oscillation?
A mass on a spring, an RLC circuit, or a swinging pendulum: all these systems oscillate. When friction or resistance is present, the motion decays over time. The governing ODE for a damped, unforced oscillator is:
Here \( m \) is mass, \( c \) is the damping coefficient, and \( k \) is the spring constant. Without any external force, the oscillation dies out eventually.
Visualizing Damped Motion
Adding an External Force
Now imagine someone pushes the spring rhythmically with a periodic force \( F_0 \cos(\omega t) \). The ODE becomes:
The parameter \( \omega \) is the driving frequency: the frequency of the external push. The key question is: how does the system respond as we change \( \omega \)?
Key Vocabulary
The General Solution
The full solution to the forced ODE is the sum of two parts:
Steady-State Amplitude Formula
After the transient dies out, the system oscillates at frequency \( \omega \) with amplitude:
where \( \gamma = \dfrac{c}{2m} \) is the damping parameter. Notice the denominator: when \( \omega \) is close to \( \omega_0 \) and damping \( \gamma \) is small, the denominator becomes very small and the amplitude blows up.
The Resonance Curve
Free vs. Forced Oscillations
| Free (Unforced) | Forced | |
|---|---|---|
| ODE | \( mx'' + cx' + kx = 0 \) | \( mx'' + cx' + kx = F_0\cos(\omega t) \) |
| Long-term behavior | Decays to rest | Steady-state oscillation at \( \omega \) |
| Frequency of motion | Natural \( \omega_0 \) | Driving \( \omega \) |
| Energy source | Initial conditions only | Continuous external input |
| Resonance possible? | No | Yes, when \( \omega \approx \omega_0 \) |
Pure Resonance: Unbounded Growth
When there is no damping (\( c = 0 \)) and \( \omega = \omega_0 \), the method of undetermined coefficients fails for a cosine guess. We multiply by \( t \):
The factor of \( t \) means the amplitude grows linearly without bound. This is pure resonance: the system absorbs energy every cycle with no friction to dissipate it.
Visualizing Pure Resonance
How to Solve a Forced ODE
Example 1: Damped Forced System
Solve for the steady-state solution:
Example 2: Pure Resonance
Solve:
Example 3: Maximum Amplitude
For \( x'' + 0.4x' + 4x = 3\cos(\omega t) \), at what \( \omega \) is the steady-state amplitude maximized?
Common Mistakes
Question 1 of 5
In the forced oscillator \( mx'' + cx' + kx = F_0\cos(\omega t) \), what does the steady-state solution oscillate at?
Question 2 of 5
What happens to the particular solution of \( x'' + 9x = \cos(3t) \) when we try the guess \( x_p = A\cos(3t) + B\sin(3t) \)?
Question 3 of 5
The amplitude formula is \( A(\omega) = \dfrac{F_0/m}{\sqrt{(\omega_0^2 - \omega^2)^2 + (2\gamma\omega)^2}} \). What happens to the peak amplitude as damping \( \gamma \to 0 \)?
Question 4 of 5
For the ODE \( x'' + 2x' + 5x = 4\cos(2t) \), the steady-state particular solution has the form \( x_p = A\cos(2t) + B\sin(2t) \). What is the amplitude \( \sqrt{A^2 + B^2} \)?
Question 5 of 5
Which of the following is the pure resonance solution to \( x'' + 4x = 10\cos(2t) \)?