01 / 21

Falling Objects
with Linear Drag

Model real-world falling motion using first-order linear ODEs that balance gravity against air resistance.

Differential Equations

Why Air Resistance Matters

In introductory physics, we often assume objects fall under gravity alone. But in reality, air pushes back on every falling object. This resistive force grows with speed: the faster you fall, the harder the air pushes against you.

The Two Forces at Play

\( m \)
\( mg \)
(gravity)
\( bv \)
(drag) Free-body diagram (downward positive)
Gravity
Constant force \( mg \) pulling the object downward, independent of speed.
Linear Drag
Resistive force \( bv \) opposing motion, proportional to velocity \( v \).

Key Variables and Parameters

\( v(t) \)
Velocity at time \( t \) (\(\text{m/s}\)), positive downward
\( m \)
Mass of the falling object (\(\text{kg}\))
\( g \)
Gravity accel. (\( \approx 9.8 \text{ m/s}^2 \)). We'll use \( 10 \text{ m/s}^2 \) in examples.
\( b \)
Drag coefficient (\(\text{kg/s}\)), depends on shape and medium

The Governing ODE

Applying Newton's second law \( F = ma \) with downward positive:

Dividing both sides by \( m \) gives the standard form:

Terminal Velocity: The Equilibrium

At terminal velocity, acceleration is zero: \( \frac{dv}{dt} = 0 \). Setting the ODE to zero:

The object stops accelerating when drag exactly balances gravity. Heavier objects or smaller drag coefficients yield higher terminal velocities.

Physical meaning
The velocity the object asymptotically approaches: it gets closer and closer but never quite reaches it in finite time.
ODE perspective
\( v_T \) is the equilibrium solution (constant solution) of the differential equation.

Solving with the Integrating Factor

1
Standard form: \( \frac{dv}{dt} + \frac{b}{m}\,v = g \)
2
Integrating factor: \( \mu(t) = e^{(b/m)\,t} \)
3
Multiply both sides: \( \frac{d}{dt}\!\bigl[e^{(b/m)t}\,v\bigr] = g\,e^{(b/m)t} \)
4
Integrate and solve: \( v(t) = \frac{mg}{b} + Ce^{-(b/m)t} \)

The General Solution

If the object starts from rest (\( v_0 = 0 \)), this simplifies to:

Velocity vs Time Graph

\( t \)
\( v \)
\( v_T \)
no drag
\( \tau \)
63%
\( 2\tau \)
86% 0

Free Fall vs Fall with Drag

Free Fall (no drag) With Linear Drag
ODE \( \frac{dv}{dt} = g \) \( \frac{dv}{dt} = g - \frac{b}{m}v \)
Solution \( v = gt + v_0 \) \( v = v_T(1 - e^{-t/\tau}) + v_0 e^{-t/\tau} \)
Long-term \( v \) \( v \to \infty \) \( v \to v_T = mg/b \)
Acceleration Constant \( g \) Decreasing, approaches 0
Realistic? Only in vacuum Good for slow/small objects

How to Solve a Drag Problem

1
Draw a free-body diagram. Identify forces: gravity \( mg \) downward, drag \( bv \) upward.
2
Write Newton's second law: \( m\frac{dv}{dt} = mg - bv \).
3
Identify terminal velocity: \( v_T = mg/b \) and time constant \( \tau = m/b \).
4
Write the general solution using the formula and apply the initial condition \( v(0) = v_0 \).
5
Answer the question: find \( v(t) \) at a specific time, or solve for when \( v \) reaches a target.

Example 1: Dropped from Rest

A \( 2 \text{ kg} \) object is dropped from rest in a medium with drag coefficient \( b = 4 \text{ kg/s} \). Find \( v(t) \) and the terminal velocity. Use \( g = 10 \text{ m/s}^2 \).

1
Terminal velocity: \( v_T = \frac{mg}{b} = \frac{2 \cdot 10}{4} = \) \( 5 \text{ m/s} \)
2
Time constant: \( \tau = \frac{m}{b} = \frac{2}{4} = \) \( 0.5 \text{ s} \)
3
Solution (\( v_0 = 0 \)): \( v(t) = 5\bigl(1 - e^{-2t}\bigr) \text{ m/s} \)

Example 2: Non-Zero Initial Velocity

A \( 5 \text{ kg} \) ball is thrown downward at \( v_0 = 20 \text{ m/s} \). The drag coefficient is \( b = 2 \text{ kg/s} \). Find \( v(t) \). Use \( g = 10 \text{ m/s}^2 \).

1
Terminal velocity: \( v_T = \frac{5 \cdot 10}{2} = \) \( 25 \text{ m/s} \)
2
Time constant: \( \tau = \frac{5}{2} = \) \( 2.5 \text{ s} \)
3
General solution: \( v(t) = 25(1 - e^{-0.4t}) + 20\,e^{-0.4t} = 25 - 5\,e^{-0.4t} \)

Example 3: Approaching from Above

Same ball (\( m=5 \text{ kg} \), \( b=2 \text{ kg/s} \), \( v_T = 25 \text{ m/s} \)) but now thrown downward at \( v_0 = 40 \text{ m/s} \).

\( t \)
\( v \)
\( v_T=25 \)
\( v_0 > v_T \)
\( v_0 < v_T \)

Key insight: all solutions converge to \( v_T \) regardless of starting velocity. Terminal velocity is a stable equilibrium.

The Time Constant \( \tau = m/b \)

The time constant \( \tau \) controls how quickly the object approaches terminal velocity. It has units of seconds.

Small \( \tau \)
Light object or high drag: reaches \( v_T \) quickly. Example: feather in air.
Large \( \tau \)
Heavy object or low drag: takes longer. Example: bowling ball in air.

Common Mistakes to Avoid

Wrong Sign on Drag
Drag opposes motion. If downward is positive, drag is negative: \( mg - bv \), not \( mg + bv \).
Forgetting \( v_0 \)
The general solution has a \( v_0 \) term. Only set it to zero when the problem says "dropped from rest."
Confusing \( \tau \) and \( v_T \)
\( \tau = m/b \) is the time constant (seconds). \( v_T = mg/b \) is the terminal velocity (m/s). Don't swap them.

Question 1 of 5

A \( 4 \text{ kg} \) object falls with drag coefficient \( b = 8 \text{ kg/s} \). Using \( g = 10 \text{ m/s}^2 \), what is the terminal velocity?

Question 2 of 5

For the ODE \( m\frac{dv}{dt} = mg - bv \), the time constant \( \tau \) equals:

Question 3 of 5

An object dropped from rest has velocity \( v(t) = 20(1 - e^{-3t}) \). What fraction of terminal velocity has it reached at \( t = \frac{1}{3} \text{ s} \)?

Question 4 of 5

If an object is thrown downward with \( v_0 > v_T \), what happens to its velocity over time?

Question 5 of 5

Which method is used to solve the first-order linear ODE \( \frac{dv}{dt} + \frac{b}{m}v = g \)?