01 / 21

Equilibrium Solutions
& Stability

Discover where differential equations stop changing, and learn to classify whether solutions stay put or drift away from equilibrium.

Differential Equations

What Is an Equilibrium Solution?

Consider an autonomous differential equation \(\dfrac{dy}{dt} = f(y)\). An equilibrium solution (also called a steady state or fixed point) is a constant value \(y = y_0\) such that:

In plain terms: if you start at \(y_0\), you stay there forever. The system is perfectly balanced: no forces push it up or down.

Visual Intuition: The Ball Analogy

Stable Unstable Ball rolls back Ball rolls away

Why Stability Matters

★ Population Biology
Carrying capacity is a stable equilibrium: populations return to it after disturbances.
★ Engineering
A bridge must have stable equilibrium under load; instability means structural failure.
★ Economics
Market prices reach equilibrium where supply meets demand: stability determines recovery.

Understanding stability tells you whether a system self-corrects or spirals out of control after a small perturbation.

Finding Equilibrium Points

For the autonomous ODE \(\dfrac{dy}{dt} = f(y)\), equilibria are the roots of \(f(y) = 0\). These are the horizontal lines \(y = y_0\) in the \(ty\)-plane where solutions neither rise nor fall.

1
Set \(f(y) = 0\) and solve for \(y\).
2
Each root \(y_0\) is an equilibrium solution \(y(t) = y_0\).
3
Draw horizontal lines at each \(y_0\) on the phase portrait or slope field.

The Stability Test: \(f'(y_0)\)

Intuition: Near \(y_0\), we have \(f(y) \approx f'(y_0)(y - y_0)\). If \(f'(y_0) < 0\), the derivative pushes \(y\) back toward \(y_0\). If \(f'(y_0) > 0\), it pushes \(y\) away.

The Phase Line Diagram

y y = 3 (unstable) y = 1 (stable) y = 0 (unstable) \(f(y) > 0\) \(f(y) < 0\) \(f(y) > 0\) \(f(y) < 0\)

Semi-Stable Equilibria

There is a third possibility: a semi-stable (or half-stable) equilibrium, where solutions approach from one side only and diverge from the other.

y y = c (semi-stable) \(f(y) > 0\) \(f(y) > 0\)

Stable vs. Unstable vs. Semi-Stable

Stable Unstable Semi-Stable
Arrows on phase line Both point toward Both point away One toward, one away
\(f'(y_0)\) \(< 0\) \(> 0\) \(= 0\)
Sign of \(f(y)\) Changes: + then − Changes: − then + Same sign both sides
Nearby solutions Converge to \(y_0\) Diverge from \(y_0\) One side converges

Step-by-Step Analysis

1
Identify \(f(y)\): write the ODE in the form \(\dfrac{dy}{dt} = f(y)\).
2
Solve \(f(y) = 0\): factor or use algebra to find all equilibrium values.
3
Compute \(f'(y)\): evaluate at each equilibrium to apply the stability test.
4
If \(f'(y_0) = 0\): check the sign of \(f(y)\) on both sides of \(y_0\).
5
Draw the phase line: mark equilibria and add arrows based on the sign of \(f(y)\).

Example 1: \(\dfrac{dy}{dt} = y(2 - y)\)

1
Equilibria: \(f(y) = y(2-y) = 0\) gives \(y = 0\) and \(y = 2\).
2
Derivative: \(f'(y) = 2 - 2y\). So \(f'(0) = 2 > 0\) → unstable. And \(f'(2) = -2 < 0\) → stable.
3
Sign check: For \(0 < y < 2\), \(f(y) > 0\) (rising). For \(y > 2\), \(f(y) < 0\) (falling). For \(y < 0\), \(f(y) < 0\) (falling).

Example 1: Solution Curves

Example 2: \(\dfrac{dy}{dt} = y^2 - 4\)

1
Equilibria: \(y^2 - 4 = 0\) gives \(y = 2\) and \(y = -2\).
2
Derivative: \(f'(y) = 2y\). So \(f'(2) = 4 > 0\) → unstable. And \(f'(-2) = -4 < 0\) → stable.
3
Sign check: \(f(y) > 0\) for \(y > 2\) or \(y < -2\). \(f(y) < 0\) for \(-2 < y < 2\).

Example 3: \(\dfrac{dy}{dt} = (y - 1)^2\)

1
Equilibrium: \((y-1)^2 = 0\) gives \(y = 1\) (a repeated root).
2
Derivative: \(f'(y) = 2(y-1)\), so \(f'(1) = 0\) → inconclusive.
3
Sign analysis: \((y-1)^2 \ge 0\) always, so \(f(y) > 0\) on both sides of \(y = 1\). Solutions always increase.

Common Mistakes

✕ Setting \(y = 0\) instead of \(f(y) = 0\)
Equilibria come from the right-hand side being zero, not from setting the variable itself to zero.
✕ Confusing \(f'(y_0) = 0\) with stable
When \(f'(y_0) = 0\), the test is inconclusive, not automatically stable. You must check signs on both sides.
✕ Ignoring non-autonomous terms
The derivative test \(f'(y_0)\) only works for autonomous equations \(\dfrac{dy}{dt} = f(y)\), not when \(f\) depends on \(t\).

Summary: Classification at a Glance

Condition Classification Behavior
\(f'(y_0) < 0\) Stable Nearby solutions → \(y_0\)
\(f'(y_0) > 0\) Unstable Nearby solutions flee \(y_0\)
\(f'(y_0) = 0\), sign changes Stable or Unstable Check sign of \(f(y)\) on both sides
\(f'(y_0) = 0\), no sign change Semi-stable Attracted from one side only

Question 1 of 5

What are the equilibrium solutions of \(\dfrac{dy}{dt} = y^2 - 9\)?

Question 2 of 5

For \(\dfrac{dy}{dt} = y(3 - y)\), classify the equilibrium at \(y = 3\).

Question 3 of 5

If \(f'(y_0) = 0\) at an equilibrium \(y_0\), what should you do next?

Question 4 of 5

For \(\dfrac{dy}{dt} = (y + 2)^2\), classify the equilibrium at \(y = -2\).

Question 5 of 5

On a phase line, arrows pointing toward an equilibrium from both sides indicate the equilibrium is: