01 / 21

Dirac Delta
Impulse Functions

Explore the Dirac delta function \(\delta(t)\): an infinitely tall, infinitely narrow "impulse" that models instantaneous forces in differential equations.

Differential Equations

What Is an Impulse?

In physics and engineering, many real-world events happen almost instantaneously: a hammer strike, a lightning bolt hitting a circuit, or a sudden voltage spike. These are called impulses: forces or inputs applied over an infinitesimally short time interval.

From Tall Pulses to \(\delta(t)\)

Imagine a rectangular pulse of width \(2\epsilon\) and height \(\frac{1}{2\epsilon}\), centered at \(t = 0\). Its area is always 1. As \(\epsilon \to 0\), the pulse grows infinitely tall and infinitely narrow:

t \(h = \frac{1}{2\epsilon}\) wide \(\epsilon\) medium \(\epsilon\) small \(\epsilon\) \(\epsilon \to 0\) 0

The Dirac Delta Function: Definition

The Dirac delta \(\delta(t - t_0)\) is not a function in the classical sense. It is a generalized function (or distribution) defined by two properties:

1
Zero everywhere except at \(t_0\): \(\delta(t - t_0) = 0\) for all \(t \neq t_0\).
2
Unit integral: \(\displaystyle\int_{-\infty}^{\infty} \delta(t - t_0)\, dt = 1\).

The Sifting Property

The most important operational property of \(\delta\) is the sifting (or sampling) property. For any continuous function \(f(t)\):

The delta function "sifts out" the value of \(f\) at the point \(t_0\). This means multiplying any function by \(\delta(t - t_0)\) and integrating simply evaluates \(f\) at \(t_0\).

Laplace Transform of \(\delta(t - t_0)\)

Using the sifting property with \(f(t) = e^{-st}\), the Laplace transform follows immediately:

Special case: \(t_0 = 0\)
\(\mathcal{L}\{\delta(t)\} = 1\). The simplest Laplace transform of all.
Shifted: \(t_0 > 0\)
\(\mathcal{L}\{\delta(t - t_0)\} = e^{-st_0}\). A time delay becomes an exponential in \(s\).

\(\delta(t)\) vs. \(u(t)\): Key Distinction

The Dirac delta and the Heaviside step function are closely related but fundamentally different:

Delta \(\delta(t)\) Step \(u(t)\)
Value at \(t < 0\) \(0\) \(0\)
Value at \(t > 0\) \(0\) \(1\)
At \(t = 0\) "infinite" discontinuity (jump)
Integral from \(-\infty\) to \(t\) \(u(t)\) ramp \(r(t)\)
Laplace transform \(1\) \(1/s\)
Relationship \(\delta(t) = u'(t)\) (derivative of step)

Visualizing \(u(t)\) and \(\delta(t)\)

\(u(t)\) t 0 1 \(\delta(t)\) t 0 ∞ \(\frac{d}{dt}\)
→

How to Solve IVPs with \(\delta\)

When a differential equation has a delta function forcing term, apply the Laplace transform method:

1
Take the Laplace transform of both sides. Use \(\mathcal{L}\{\delta(t - t_0)\} = e^{-st_0}\).
2
Substitute initial conditions and solve for \(Y(s)\) algebraically.
3
Apply partial fractions if needed, then use the inverse Laplace transform.
4
Use the shift theorem: \(\mathcal{L}^{-1}\{e^{-st_0}F(s)\} = f(t - t_0)\,u(t - t_0)\).

Example 1: Simple Impulse

Solve: \(y' + 2y = \delta(t),\quad y(0) = 0.\)

1
Laplace transform: \(sY - 0 + 2Y = 1\), so \((s+2)Y = 1\).
2
Solve: \(\displaystyle Y(s) = \frac{1}{s+2}\).
3
Inverse transform: \(y(t) = e^{-2t}\,u(t)\).

Example 1: Graph

t y 0 1 2 3 4 1 \(\delta(t)\) \(y = e^{-2t}\)

Example 2: Shifted Impulse

Solve: \(y'' + 4y = \delta(t - \pi),\quad y(0) = 0,\; y'(0) = 0.\)

1
Laplace transform: \(s^2Y + 4Y = e^{-\pi s}\), so \(Y = \dfrac{e^{-\pi s}}{s^2 + 4}\).
2
Recognize: \(\mathcal{L}^{-1}\!\left\{\dfrac{1}{s^2+4}\right\} = \dfrac{1}{2}\sin(2t)\).
3
Apply shift theorem: \(y(t) = \dfrac{1}{2}\sin\!\big(2(t-\pi)\big)\,u(t-\pi)\).

Example 2: Graph

t y 0 \(\pi\) \(2\pi\) \(\delta(t-\pi)\) 0.5 −0.5

Example 3: Spring-Mass System

A damped spring-mass system is struck at \(t = 3\): $$y'' + 2y' + 5y = 4\delta(t - 3),\quad y(0) = 0,\; y'(0) = 0.$$

1
Transform: \((s^2 + 2s + 5)Y = 4e^{-3s}\), so \(Y = \dfrac{4e^{-3s}}{(s+1)^2 + 4}\).
2
Recognize: \(\mathcal{L}^{-1}\!\left\{\dfrac{2}{(s+1)^2+4}\right\} = e^{-t}\sin(2t)\).
3
Result: \(y(t) = 2e^{-(t-3)}\sin\!\big(2(t-3)\big)\,u(t-3)\).

Common Mistakes with \(\delta(t)\)

✕ Treating \(\delta\) as a number
\(\delta(0) \neq \infty\). Writing \(\delta(0) = \infty\) is meaningless. The delta function only has meaning inside an integral.
✕ Forgetting \(u(t - t_0)\)
After inverting the Laplace transform of a shifted delta, the answer must include the Heaviside factor \(u(t - t_0)\).
✕ Wrong sifting limits
The sifting property requires \(t_0\) to be inside the integration interval. If \(t_0\) is outside, the integral is 0, not \(f(t_0)\).

Key Formulas Summary

Property Formula
Definition \(\delta(t-t_0) = 0\) for \(t \neq t_0\), and \(\int_{-\infty}^{\infty} \delta(t-t_0)\,dt = 1\)
Sifting \(\displaystyle\int_{-\infty}^{\infty}f(t)\,\delta(t-t_0)\,dt = f(t_0)\)
Laplace (\(t_0=0\)) \(\mathcal{L}\{\delta(t)\} = 1\)
Laplace (shifted) \(\mathcal{L}\{\delta(t-t_0)\} = e^{-st_0}\)
Derivative of step \(\delta(t) = u'(t)\)
Scaling \(\delta(at) = \frac{1}{|a|}\delta(t)\)

Question 1 of 5

What is the value of \(\displaystyle\int_{-\infty}^{\infty}\delta(t)\,dt\)?

Question 2 of 5

What is the Laplace transform \(\mathcal{L}\{\delta(t - 5)\}\)?

Question 3 of 5

Evaluate: \(\displaystyle\int_0^{10}(t^2 + 3)\,\delta(t - 4)\,dt\)

Question 4 of 5

Solve \(y' + y = \delta(t)\) with \(y(0) = 0\). What is \(y(t)\) for \(t > 0\)?

Question 5 of 5

What is the relationship between \(\delta(t)\) and the Heaviside step function \(u(t)\)?