01 / 21

The Solidify
Modifier

Learn how to add uniform thickness to any mesh surface, transforming flat planes into shell-like 3D forms using Blender's Solidify modifier.

Blender

What Is the Solidify Modifier?

In Blender, a modifier is a non-destructive operation applied to an object's geometry. The Solidify modifier takes a flat surface (a mesh with zero thickness) and extrudes it along its face normals to create a shell with real, measurable thickness.

Why Thickness Matters

Realistic Rendering
Zero-thickness surfaces look flat and fake. Real objects like walls, armor, and cups all have thickness that catches light differently on inner and outer surfaces.
3D Printing
A single-face mesh cannot be printed. Solidify creates a valid, watertight shell that slicers can process into physical objects.
Physics Simulation
Cloth, collision, and fluid simulations behave more accurately when meshes have proper volume rather than being infinitely thin planes.

Understanding Face Normals

Normal Flat Plane \( t \) Solidified

The Core Mechanism

\( V \) \( \vec{n} \) \( V + t \cdot \vec{n} \) New Position: \( V_{\text{new}} = V_{\text{old}} + (\text{Displacement}) \cdot \vec{n} \) Offset = -1 Grows outward only Offset = 0 Grows equally both sides

Key Parameters

Thickness
The total distance \( t \) between inner and outer surfaces, measured in Blender units. Positive values extrude outward; negative values extrude inward.
Offset
Ranges from \( -1 \) to \( +1 \). At \( -1 \), thickness grows outward. At \( +1 \), it grows inward. At \( 0 \), it splits evenly.
Even Thickness
Corrects uneven shell width at sharp angles by adjusting vertex offsets. Essential for curved surfaces.
Fill Rim
Closes the open edges between inner and outer shells with new faces, creating a watertight mesh.

Solidify vs. Extrude

Solidify Modifier Extrude (E key)
Type Non-destructive modifier Destructive edit-mode operation
Applies To Entire mesh automatically Selected faces only
Adjustable After? ✓ Yes, any time ✕ Only with undo
Even Thickness ✓ Built-in option ✕ Manual correction
Best For Uniform shells, walls, armor Local extrusions, bevels

How to Apply the Modifier

1
Select your object in Object Mode by left-clicking on it.
2
Open the Properties panel and click the wrench icon to enter the Modifiers tab.
3
Add Modifier > Generate > Solidify. The mesh instantly gains thickness.
4
Adjust Thickness to your desired value. Typical values: \( 0.01 \) for thin sheet metal, \( 0.1 \) for walls.
5
Set Offset to \( -1 \) (outward), \( 0 \) (centered), or \( +1 \) (inward).
6
Enable Even Thickness if the mesh has curved or angled faces.

Example 1: Simple Wall

Before Flat Plane Solidify After \( t = 0.05 \) Solidified Wall Rim faces

Example 2: Curved Cup

Cross-Section Before Single-wall mesh Cross-Section After \( t \) Double-wall shell

Example 3: Armor Plate

Vertex Group Thicker here Outer shell Inner shell Settings: Thickness = 0.08 | Offset = -1 | Even Thickness = On

The Even Thickness Problem

Without Even Thickness Too thin! With Even Thickness Uniform

Material Index Offset

The Solidify modifier can assign different materials to the outer faces, inner faces, and rim faces. This is controlled by three Material Offset fields:

Outer
Offset = 0: Uses the same material as the original mesh. Set to 1 to use the next material slot.
Inner
Applies to the newly generated inner shell faces. Set to 1 to give the inside a different color or shader.
Rim
Applies to the edge-fill faces. Set to 2 to give the rim a third distinct material.

Modifier Stack Order

Subdivision Surface Solidify Bevel 1st: Smooth mesh 2nd: Add thickness 3rd: Soften edges Execution Order matters: Solidify AFTER Subdivision!

Common Mistakes

✕ Forgetting Even Thickness
On curved or angular meshes, the shell becomes visibly thinner at sharp bends. Always check Even Thickness for organic shapes.
✕ Flipped or Incorrect Normals
If normals are flipped before applying Solidify, the shell grows in the wrong direction. Recalculate normals first with Shift+N.
✕ Ignoring Modifier Order
Placing Solidify above Subdivision creates jagged edges. Always place it after subdivision in the stack.

Quick Reference Table

Parameter Default Typical Range When to Change
Thickness 0.01 0.001 to 1.0 Always: set to desired shell depth
Offset -1 -1 to +1 Inward shells, centered shells
Even Thickness Off On / Off Curved or sharp-angle meshes
Fill Rim On On / Off Open-edge meshes (planes, cups)
Flip Normals Off On / Off When inner faces appear black

Question 1 of 5

What does the Solidify modifier do to a flat plane in Blender?

Question 2 of 5

If you set the Offset to \( -1 \), in which direction does the thickness grow?

Question 3 of 5

You notice that the inner faces of your solidified mesh appear black. Which setting should you enable?

Question 4 of 5

In a modifier stack, where should Solidify typically be placed relative to Subdivision Surface?

Question 5 of 5

What does the Even Thickness option correct?