01 / 21

Array Modifier
Repeated Geometry

Learn to use Blender's Array modifier to create linear and curve-based repetitions of geometry: from fence posts to spiral staircases.

Blender

What Is the Array Modifier?

The Array modifier creates multiple copies (instances) of a single mesh object along a specified direction. Instead of manually duplicating geometry, you define the count and offset, and Blender generates the repetitions non-destructively.

Why Use Repeated Geometry?

Efficiency
One base object controls hundreds of copies: change it once, update everywhere.
Consistency
Perfect spacing every time: no eyeballing. Offsets are mathematically exact.
Flexibility
Switch from linear to curve-based arrays at any point in your workflow.

Key Vocabulary

Count
The total number of copies (including the original) the modifier produces.
Offset
The distance and direction between each copy: can be relative, constant, or object-based.
Fit Type
Determines how many copies: Fixed Count, Fit Length, or Fit Curve.
Curve Modifier
An additional modifier that deforms the arrayed mesh to follow a Bezier or NURBS curve.

Three Offset Types

Relative Offset
Factor of bounding box: X=1.2
Constant Offset 80 units
Fixed distance: X = 80 units
Object Offset
Uses an Empty's transform

Linear vs. Curve Array

Linear Array Curve Array
Direction Straight line (X, Y, or Z) Follows a Bezier/NURBS path
Fit Type Fixed Count or Fit Length Fit Curve
Requires Only Array modifier Array + Curve modifier
Use Case Fences, stairs, rows Chains, roads, spirals
Deformation None (copies are rigid) Copies bend along curve

How to Add an Array Modifier

1
Select the mesh object you want to repeat.
2
Open the Properties panel → click the wrench icon (Modifiers tab).
3
Click "Add Modifier" → choose Array from the Generate section.
4
Set the Count and adjust the Offset values (Relative X = 1.0 by default).
5
Tweak in the viewport. When satisfied, optionally Apply the modifier (Ctrl + A).

Example 1: Fence Posts

Original Copy 1 Copy 2 80 units
Count = 7, Relative X = 5.0

Example 2: Staircase

Base step X + Z offset Relative Offset
X = 1.0 Z = 0.5 Count = 6

Example 3: Curve Array

Bezier Curve 1. Array → 2. Curve
1
Create a single chain link mesh and a Bezier curve path.
2
Add an Array modifier to the link: set Fit Type to "Fit Curve" and select the curve.
3
Add a Curve modifier below the Array: set the same curve as the target.
4
The links now follow the curve. Reshape the curve to change the chain path.

Object Offset: Radial Arrays

Empty
\( 45^\circ \)
Count = 8
Empty Z-rot = \( 45^\circ \)

Fit Type Options

Fixed Count
You specify exactly how many copies. Use when you know the number needed (e.g., 12 columns).
Fit Length
You set a total length in units. Blender calculates how many copies fit. Great for filling a wall.
Fit Curve
Copies fill the entire curve length. Pair with a Curve modifier for path-following arrays.

Merge and End Caps

The Array modifier has two important extra options that clean up the final result:

Merge
Welds overlapping vertices between copies. Prevents visible seams and doubles. Set a Distance threshold (usually 0.001).
End Caps
Assign separate meshes for the Start Cap and End Cap: great for fence ends, pipe flanges, or column bases.

Modifier Stack Order Matters

✓ Correct Array Curve Subdivision ✕ Wrong Subdivision Array Curve Array before Curve. Subdivision last.

Common Mistakes

✕ Origin Not at Edge
If the origin is centered, copies overlap. Move the origin to the edge where the next copy should start.
✕ Wrong Modifier Order
Placing Curve before Array means the single object deforms, then duplicates: giving broken results.
✕ Scale Not Applied
Non-applied scale (Ctrl+A) causes unexpected spacing. Always apply transforms before adding Array.

Summary Reference

Setting What It Does Typical Value
Count Number of copies 2 to 100+
Relative Offset Spacing as factor of bounding box X = 1.0
Constant Offset Spacing in fixed world units X = 2.0 m
Object Offset Uses an Empty's transform e.g., Z-Rot: \( 30^\circ \)
Fit Type How count is determined Fixed Count (default)
Merge Welds overlapping vertices On, Dist = 0.001

Question 1 of 5

What does the Relative Offset in the Array modifier use to calculate the spacing between copies?

Question 2 of 5

To make copies follow a curved path, which two modifiers do you need on the mesh object?

Question 3 of 5

You want to create a radial pattern of 12 pillars around a central point. What rotation should you apply to the Empty used for Object Offset?

Question 4 of 5

Your array copies appear stretched and unevenly spaced. What is the most likely cause?

Question 5 of 5

In a modifier stack with Array, Curve, and Subdivision Surface, what is the correct top-to-bottom order?