01 / 21

Cloth Simulation
in Blender

Learn to create realistic fabric behavior using Blender's physics engine: draping, collisions, and parameter tuning.

Blender 3D Graphics

What Is Cloth Simulation?

Cloth simulation is a physics-based technique that computes how fabric-like surfaces move, deform, and interact with other objects over time. Instead of manually keyframing every fold and wrinkle, Blender's solver calculates the motion for you.

The Mass-Spring Model

Vertices = Particles (mass)
Structural Spring
Shear Spring
Gravity

Why Use Cloth Simulation?

Realism
Physics-accurate draping, folding, and wrinkling that would be nearly impossible to animate by hand.
Speed
Once configured, the solver computes hundreds of frames automatically: change one parameter and re-simulate.
Versatility
Curtains, flags, capes, tablecloths, soft bodies, even paper: all share the same core workflow.

The Core Equation

At each time step, the solver updates every particle using Newton's second law:

The net force \( \mathbf{F} \) on each vertex is the sum of:

1
Spring forces: \( \mathbf{F}_s = -k \, (\|\mathbf{x}\| - L_0) \, \hat{\mathbf{x}} \) where \( k \) is stiffness and \( L_0 \) is rest length.
2
Gravity: \( \mathbf{F}_g = m \, \mathbf{g} \) pulling every vertex downward.
3
Damping: \( \mathbf{F}_d = -d \, \mathbf{v} \) which slows motion and prevents perpetual oscillation.
4
External forces: wind, turbulence, and collision responses from nearby objects.

Key Parameters at a Glance

Cloth Physics
Properties Panel
Stiffness
Tension, Compression
Mass
Vertex Group / Uniform
Damping
Spring, Air
Collision
Distance, Quality

Cloth Object vs Collision Object

Cloth Object Collision Object
Physics Type Cloth (deformable) Collision (rigid/passive)
Role The fabric that drapes Surface the cloth lands on
Mesh Needs Subdivided, uniform quads Any clean mesh works
Key Settings Stiffness, Mass, Damping Thickness, Friction
Typical Example Tablecloth, curtain, flag Table, floor, character body

How to Set Up Cloth Simulation

1
Create the cloth mesh: Add a Plane (or Grid), subdivide it so it has enough geometry (at least 50 subdivisions for smooth draping).
2
Add Cloth physics: Select the plane, go to Physics Properties, click Cloth.
3
Create the collision object: Add a solid object beneath the cloth (e.g., a UV Sphere, Cube, or imported model).
4
Add Collision physics: Select the solid object, go to Physics Properties, click Collision.
5
Position the cloth above the object: Move the cloth plane so it starts above the collision object in the Z axis.
6
Bake and play: Press Space to play the simulation and watch the cloth drape naturally.

Example 1: Basic Drape

Collision: Table
Cloth: Subdivided Plane
Gravity
After Simulation (Frame 60)

Example 2: Tuning Stiffness

Low Stiffness (5)
Cloth hugs the sphere tightly
High Stiffness (50)
Cloth holds its shape, less droop

Example 3: Pinning Vertices

P
P
Pinned
Pinned
Vertex Group: "Pin"
Weight = 1.0 on pinned vertices
Gravity

Collision Settings Explained

Quality
Number of collision solver iterations per step. Higher = more accurate but slower. Default is 2; try 5 for complex scenes.
Distance
Minimum gap between cloth surface and collision surface. Too small = clipping. Too large = cloth floats above the object.
Self-Collision
Prevents the cloth from passing through itself. Essential for folded or bunched fabric. Enable under Cloth > Self Collision.

Simulation Quality Settings

1
Steps Per Frame: Number of sub-steps the solver computes per frame. Default is 5. Increase to 10–15 for fast-moving cloth or if the cloth is exploding.
2
Mesh Subdivision: More subdivisions = more vertices = smoother drape. But also slower. Start with a Grid (50 × 50 cuts) for testing.
3
Baking: Once satisfied, go to Cloth > Cache and click Bake. This pre-computes all frames so playback is smooth.

Adding Wind and Forces

Wind Force
Force Field: Wind
Add > Force Field > Wind
Adjust Strength and Turbulence in Physics Properties

Common Mistakes to Avoid

✕ Not Enough Geometry
Using an unsubdivided plane (4 vertices). The cloth needs many vertices to simulate folds. Use at least 50 subdivisions.
✕ Missing Collision Object
Adding Cloth physics but forgetting to add Collision physics to the surface below. The cloth falls through everything.
✕ Cloth Starts Inside Collision
Positioning the cloth mesh so it overlaps the collision object at frame 1. This causes instant explosion or clipping. Always start above.
✕ Too Few Sub-Steps
Keeping Steps Per Frame at 5 with fast-moving cloth. The solver can't keep up and the mesh explodes. Increase to 10–15.
✕ Forgetting to Bake
Editing the cloth mesh or moving objects without freeing the old cache first. Always Free Bake before making changes, then re-bake.

Parameter Summary

Parameter Default Effect of Increasing Typical Range
Mass 0.3 kg Heavier, droopier fabric 0.1 – 2.0
Tension Stiffness 15 Resists stretching more 5 – 80
Bending Stiffness 0.5 Fewer wrinkles, stiffer folds 0.1 – 10
Damping 0.5 Less bouncing, settles faster 0.1 – 10
Steps/Frame 5 More stable, slower to compute 5 – 20
Collision Distance 0.015 Cloth floats further from surface 0.005 – 0.05

Question 1 of 5

In Blender's cloth simulation, what role does a Collision object serve?

Question 2 of 5

Your cloth simulation is "exploding" at frame 1. What is the most likely cause?

Question 3 of 5

To create a curtain that hangs from a rod, which technique should you use?

Question 4 of 5

What does increasing the Tension Stiffness parameter do to cloth behavior?

Question 5 of 5

You notice the cloth is clipping through the collision object in some frames. Which two adjustments are most effective?