View Range
& Crop
Master how Revit decides what geometry appears in plan views by controlling cut planes, crop regions, and annotation crops.
What Is View Range?
Every floor plan in Revit is a horizontal slice through the building model. View Range defines the vertical boundaries of that slice: how high the cut plane sits, what you see above it, and how far below you can look.
The Four Planes of View Range
Why View Range Matters
The View Range Dialog
Access the dialog from Properties Panel → View Range (or type VR). Each plane is defined by a reference level and an offset value.
How the Cut Plane Works
Crop Region vs Annotation Crop
Visualizing Crop Boundaries
How to Set View Range
How to Control Crop Regions
Example: Standard Floor Plan
Example: Double-Height Space
A two-storey atrium has a mezzanine railing at \(12'\). The default cut at \(4'\) misses the upper railing entirely. You need to raise the Top Clip Plane to capture it.
Example: Crop for Sheet Placement
You need to place a floor plan on an A1 sheet, but the full building doesn't fit at \(1:100\) scale. Use the Crop Region to isolate a wing, and the Annotation Crop to keep dimension strings visible.
Understanding View Depth
View Depth is a secondary plane below the Bottom Clip. Elements between the Bottom and View Depth show with the "Beyond" line style (typically a thin, light grey line). This is useful for:
Common Mistakes
Summary Comparison
| View Range | Crop Region | Annotation Crop | |
|---|---|---|---|
| Controls | Vertical visibility | Horizontal (plan) extent | Annotation extent |
| Affects | All elements by height | Model elements | Tags, dims, text |
| Access | Properties → View Range | Properties → Crop View | Properties → Annotation Crop |
| Default | Cut at \(4'\), Top at \(10'\) | Off (full extent) | Off (follows model crop) |
| Typical Use | Show/hide by storey | Isolate building wings | Keep dims visible |
Question 1 of 5
In a default Revit floor plan, the Cut Plane is typically set at what height above the associated level?
Question 2 of 5
An element is located between the Bottom Clip Plane and the View Depth. How will it appear in the plan view?
Question 3 of 5
What is the primary purpose of the Annotation Crop?
Question 4 of 5
You have a double-height atrium with a mezzanine railing at \(12'\). The railing does not appear in your floor plan. What is the most likely fix?
Question 5 of 5
Before cropping a floor plan for sheet placement, what is the recommended best practice?