01 / 20

Trim, Extend, Split
& Join

Master the four essential editing tools in Autodesk Revit that let you cleanly connect, separate, and reshape building elements.

Autodesk Revit

What Are Modify Tools?

Revit's Modify tab contains a family of geometry-editing commands that let you reshape walls, lines, and other elements without deleting and redrawing them. The four we focus on today are:

Trim / Extend
Shorten or lengthen elements to meet a boundary
Split
Break one element into two independent pieces
Join
Merge geometry where elements overlap or meet

Why Clean Connections Matter

In a BIM workflow, every wall, beam, and line carries data: material, dimensions, cost. If elements don't connect properly, you get:

1
Inaccurate schedules: gaps create duplicate counting or missing quantities.
2
Visual artifacts: overlapping walls show double lines in plan views.
3
Coordination failures: MEP systems may not detect intersections correctly.

The Trim / Extend Tool

BEFORE Boundary Wall A gap Wall B excess → AFTER Boundary Extended Trimmed

Trim/Extend Modes

Single Element
Select a boundary, then click one element at a time. Best for precise, targeted edits.
Corner
Click two elements: both extend or trim to form a clean corner. No boundary needed.
Multiple
Select a boundary, then drag a crossing fence to trim/extend many elements at once.

The Split Element Tool

BEFORE Single Wall Click here → AFTER Part A Part B split point

The Split Element tool (keyboard shortcut: SL) divides a single element into two independent segments at the point you click. Each segment can then be moved, deleted, or edited separately.

The Join Geometry Tool

BEFORE Wall Column Visible overlap lines → AFTER Wall Clean intersection ✓ Joined

Join Geometry merges the geometry of two overlapping elements so that Revit removes internal lines and treats the intersection as a single clean connection.

Trim/Extend vs. Join

Trim / Extend Join Geometry
Purpose Resize to meet a boundary Merge overlapping geometry
Changes length? Yes No
Removes lines? Only the trimmed portion Internal overlap lines
Works on Walls, lines, beams Any 3D geometry pair
Shortcut TR None by default

Step-by-Step Workflow

1
Identify the problem: Gap (extend), overshoot (trim), need to divide (split), or overlap artifact (join).
2
Choose the tool from the Modify tab or use the keyboard shortcut: TR, SL, or find Join.
3
Select the boundary (Trim/Extend) or click the split point (Split), or pick both elements (Join).
4
Click the element(s) you want to modify. The side you click on matters: for Trim, click the portion to keep.
5
Verify: Check in plan view and 3D view that connections are clean and schedules update.

Example 1: Trimming a Wall to a Corner

BEFORE Horizontal Wall Vertical Wall Excess → AFTER Trimmed Clean corner

Example 2: Extending Detail Lines

Boundary Line A Line B Line C All three now reach the boundary ✓

Example 3: Split with Gap

BEFORE Continuous Wall Door opening → AFTER Segment A Gap Segment B

Check the "Delete Inner Segment" option in the Options Bar when using Split. Click two points on the wall: the portion between them is removed, leaving a gap for a door or opening.

Join Geometry: Unjoin & Switch Order

Join
Merges two overlapping elements. Revit decides which material "wins" at the intersection.
Unjoin
Reverses a Join. Has no default shortcut. Internal lines reappear and elements become independent again.
Switch Join Order
Changes which element's material takes priority at the overlap. Useful for wall-floor intersections.

Common Mistakes to Avoid

✕ Clicking the Wrong Side
When trimming, click the side you want to keep, not the portion to remove. Clicking the wrong side deletes the larger segment.
✕ Using Split Instead of Trim
Split leaves both segments in place. If you need to remove excess, use Trim instead so the extra portion is automatically deleted.
✕ Forgetting to Join
Overlapping walls and columns show double lines in plan views. Always Join Geometry where 3D elements intersect.
✕ Trimming Locked Elements
Pinned or dimension-locked elements will reject edits. Unpin the element first, then apply your modification.

Tool Summary

Tool Shortcut What It Does Use When
Trim/Extend TR Resizes to a boundary Elements are too long or short
Split Element SL Breaks into two pieces Need to divide or create a gap
Join Geometry None by default Merges overlap display Overlapping 3D elements
Unjoin Geometry None by default Reverses a join Need to separate joined elements

Question 1 of 5

A wall extends past a perpendicular wall and you need to remove the excess so they form a clean corner. Which tool should you use?

Question 2 of 5

You see double lines in plan view where a column intersects a wall. What is the most appropriate fix?

Question 3 of 5

What does the "Delete Inner Segment" option do when using the Split Element tool?

Question 4 of 5

You want to extend five detail lines to meet a reference plane simultaneously. Which Trim/Extend mode is most efficient?

Question 5 of 5

After joining a wall and a floor, you realize the wrong material is showing at the intersection. What should you do?