Selection &
Visibility
Master the art of selecting elements, applying filters, and controlling visibility in Autodesk Revit to work efficiently on any project.
What Is Selection in Revit?
Selection is the fundamental act of choosing one or more model elements so you can view their properties, modify them, or perform actions. Every editing workflow in Revit begins with selection: you must pick what you want to change before you can change it.
Why Visibility Matters
A Revit model can contain thousands of elements across dozens of categories: walls, doors, pipes, ducts, furniture, and more. Controlling which elements are visible in a view lets you focus on exactly what you need, reducing clutter and preventing accidental edits.
The Revit Selection Toolkit
Refining with Selection Filters
When you use a window or crossing selection, you often grab more elements than you need. The Filter tool (found on the Modify ribbon tab) opens a dialog listing every category in your selection. Uncheck categories to remove them.
The Core Rule: V/G Overrides
Every Revit view has a Visibility/Graphics Overrides dialog (VV or VG). This is the master control panel for what appears in any given view. It governs visibility at three levels:
Inside the V/G Dialog
Hide vs. Isolate: Key Distinction
Temporary vs. Permanent Visibility
| Temporary | Permanent | |
|---|---|---|
| Accessed via | View Control Bar or right-click | V/G Overrides (VV) |
| Visual indicator | Cyan border around view | No special indicator |
| Persists on close? | No: resets when you reopen | Yes: saved with the view |
| Affects prints? | Yes, prints what is visible | Always affects print output |
| Best for | Quick exploration, editing | Sheet presentation, deliverables |
How to Apply Selection and Visibility
Example 1: Isolating Walls
You are working on a floor plan cluttered with furniture, doors, windows, and annotations. You need to edit wall types without accidentally selecting other elements.
Example 2: Filter After Selection
You need to delete all furniture from a floor plan, but doors and walls are intermixed in the same area. A crossing select grabs everything.
Example 3: Tab-Selecting a Wall Chain
You want to select an entire chain of connected walls without dragging a selection box. The Tab key cycles through selection options while hovering.
The View Control Bar
The View Control Bar sits at the bottom of every view. It provides quick access to visibility toggles, display style, detail level, and temporary hide/isolate controls.
Revealing Hidden Elements
Sometimes elements are hidden and you need to find them again. Revit provides a special mode to see what has been hidden in the current view.
Common Mistakes to Avoid
Summary: Visibility Methods
| Method | Scope | Permanent? | |
|---|---|---|---|
| Hide in View (Element) | Right-click menu | One element | Permanent |
| Hide in View (Category) | Right-click menu | All of that type | Permanent |
| Isolate in View | Right-click menu | Selected only | Temporary |
| V/G Overrides (VV) | Dialog box | By category/filter | Permanent |
| View Template | Properties palette | Entire view | Permanent |
Question 1 of 5
You drag from right to left across several elements in a floor plan view. What type of selection does this create?
Question 2 of 5
What keyboard shortcut opens the Visibility/Graphics Overrides dialog in Revit?
Question 3 of 5
You used Isolate in View on a group of walls. A cyan border appears around the view. What does this indicate?
Question 4 of 5
You want to select an entire chain of connected walls by hovering over one wall. Which technique should you use?
Question 5 of 5
You activate Reveal Hidden Elements mode. Which of the following will NOT be shown in the magenta overlay?