01 / 21
ft m

Project Units
in Autodesk Revit

Master the configuration of length, area, slope, and other unit formats to ensure accuracy and consistency across every Revit project.

Autodesk Revit

What Are Project Units?

Project Units define how Revit displays and interprets every measurement in your model: lengths, areas, volumes, angles, slopes, and more. They do not change the internal precision of the model, only the formatting you see on screen and in schedules.

Why Accuracy Starts Here

Consistency
Every dimension, tag, and schedule reads in the same format across the entire project.
Collaboration
Teams exchange models confidently when units match the agreed standard (Imperial or Metric).
Precision
Rounding rules and decimal places control how values display, preventing misreads on drawings.

The Seven Unit Disciplines

Revit organizes Project Units into discipline groups. Each group contains specific format types you can customize independently.

Project Units Common Structural HVAC Electrical Piping Energy Infrastructure

The Project Units Dialog

Access the dialog from the Manage tab on the ribbon. Every format change you make here applies project-wide: dimensions, schedules, annotations, and tooltips all update instantly.

Length Feet and fractional inches
Area Square feet
Angle Decimal degrees
Slope \( \text{Rise / 12''} \)

Inside a Format Type

Each unit type (Length, Area, Slope, etc.) has its own Format dialog with four configurable properties:

1
Units: the measurement system, e.g., Feet and fractional inches, Millimeters, Decimal feet.
2
Rounding: how values are rounded, e.g., to the nearest \( \tfrac{1}{16}'' \), or 2 decimal places.
3
Unit suffix: whether to display the symbol (', ", mm, m) after each value.
4
Digit grouping: how thousands are separated (comma, space, or none).

Imperial vs Metric

Imperial Metric
Length Feet & fractional inches Millimeters
Area Square feet (\( \text{ft}^2 \)) Square meters (\( \text{m}^2 \))
Slope \( \text{Rise / 12''} \) \( \text{Ratio } (1 : n) \)
Angle Decimal degrees Decimal degrees
Volume Cubic feet (\( \text{ft}^3 \)) Cubic meters (\( \text{m}^3 \))
Template Default (US).rte Default Metric.rte

Project Units vs Type Parameters

Project Units
Global display setting. Affects how every dimension, schedule, and tag shows values. Changed in Manage → Project Units.
Type Parameters
Per-element overrides. A dimension type can use its own unit format, overriding the project default for that one style.

How to Set Project Units

1
Open the dialog: Go to Manage tab → Project Units (or type UN).
2
Select discipline: Choose Common for everyday units (Length, Area, Volume, Angle, Slope).
3
Click a format type: Select the row (e.g., Length) and click the Format button to open its settings.
4
Set Units: Pick from the dropdown (e.g., Feet and fractional inches, Decimal feet, Millimeters).
5
Set Rounding: Choose precision (e.g., to the nearest \( \tfrac{1}{16}'' \) for Imperial or 0 decimals for Metric).
6
Click OK twice. Every dimension and schedule in the project updates immediately.

Example 1: Setting Length Units

Scenario: You start a new residential project using a US template. The default length is set to "Feet and fractional inches" with \( \tfrac{1}{256}'' \) rounding. You want Decimal feet rounded to 2 decimal places.

Units Decimal feet
Rounding 2 decimal places
Unit suffix ' (foot mark)

Example 2: Area & Volume

Scenario: A commercial office project requires area in square feet with no decimals and volume in cubic yards with 1 decimal for earthwork schedules.

Area Settings
Units: Square feet
Rounding: 0 decimal places
Suffix: SF
Volume Settings
Units: Cubic yards
Rounding: 1 decimal place
Suffix: CY

Example 3: Slope Formatting

Scenario: A roof plan needs slopes displayed as rise over 12 inches (Imperial standard: \( \frac{\text{rise}}{12''} \)). A site plan needs slopes as a percentage.

Roof Slope
\( 12'' \)
\( 4'' \)
\( 4 : 12 \)
Site Slope
\( 100' \)
\( 2' \)
\( 2\% \)

Angle Units & Rounding

Revit supports angles in decimal degrees, degrees-minutes-seconds (DMS), radians, and gradians. Rounding controls how precisely angles display.

\( 45.00^\circ \)
A Same Angle
\( 45.00^\circ \)
Decimal
\( 45^\circ 0' 0'' \)
DMS
\( 0.7854 \text{ rad} \)
Radians
\( 50.00 \text{ grad} \)
Gradians

Templates Lock in Your Units

When you create a project from a template (.rte file), the template's Project Units become your starting defaults. Save your preferred unit settings into your office template so every new project starts correctly.

1
Open your template (.rte file) in Revit.
2
Set all Project Units exactly as your firm requires.
3
Save the template. Every future project inherits these settings.

Linked Models & Unit Conflicts

When you link another Revit model into your project, Revit converts its geometry to your project's internal units automatically. However, display formatting differences can cause confusion in schedules.

Host Model Imperial: ft-in
Length: \(10'\text{-}6''\)
Link Linked Model Metric: mm
Length: \(3200 \text{ mm}\)

Common Mistakes

✕ Wrong Template
Starting with a Metric template for an Imperial project (or vice versa) and not noticing until dimensions look wrong.
✕ Over-Precise Rounding
Leaving rounding at \( \tfrac{1}{256}'' \) when construction tolerances are only \( \tfrac{1}{8}'' \), cluttering dimensions.
✕ Ignoring Slope Format
Displaying roof slopes as percentages when the contractor expects \( \text{rise/run} \) notation (e.g., \( 4:12 \)).

Question 1 of 5

Where do you access the Project Units dialog in Revit?

Question 2 of 5

Which of the following is NOT a configurable property inside a Format Type dialog?

Question 3 of 5

A contractor expects roof slopes written as \( 4 : 12 \). Which slope format should you choose?

Question 4 of 5

When you link a Metric model into an Imperial host project, what happens to the linked geometry?

Question 5 of 5

To ensure every new project in your firm starts with the correct unit settings, you should: