Print/Export
Troubleshooting
Learn to diagnose and fix the most common print and export issues in Autodesk Revit: missing lineweights, incorrect scaling, and broken output files.
What Is Print/Export Troubleshooting?
When you print or export a Revit model to PDF, DWG, or paper, the output doesn't always match what you see on screen. Print/export troubleshooting is the systematic process of identifying why your output looks wrong and how to fix it.
The Output Pipeline in Revit
Why Output Quality Matters
Core Rule: Lineweight Settings
Core Rule: Scale Relationship
In Revit, the printed scale depends on three linked settings that must all agree:
Print vs Export: Key Differences
| Print (PDF/Paper) | Export (DWG/DXF/IFC) | |
|---|---|---|
| Format | Rasterized or vector PDF, physical paper | Native CAD/BIM format files |
| Lineweights | Controlled by Print Setup pen table | Controlled by Export Setup mapping |
| Scale | Paper size + Zoom % must match | Defined by export units + coordinate system |
| Common Issue | Hairline lines, wrong paper size | Missing layers, flattened data |
| Settings Location | File → Print → Print Setup | File → Export → (format) → Setup |
How Lineweight Numbers Work
Step-by-Step Troubleshooting Checklist
Example 1: Missing Lineweights
Symptom: All lines in the PDF look identical: thin hairlines with no hierarchy.
Example 2: Wrong Scale on Output
Symptom: The title block says \( \frac{1}{4}'' = 1'-0'' \) but when you measure the printed sheet, the scale is off.
Example 3: DWG Export Missing Elements
Symptom: You export to DWG and open it in AutoCAD. Some walls, text, or hatching is missing.
Print Region vs Visible Portion
DWG Export: Layer Mapping
When Revit exports to DWG, it converts Revit categories to AutoCAD layers. This mapping is configurable but often causes confusion:
| Revit Category | Default DWG Layer | AIA Standard Layer |
|---|---|---|
| Walls | A-WALL | A-WALL |
| Doors | A-DOOR | A-DOOR |
| Annotations | A-ANNO-NOTE | A-ANNO-TEXT |
| Dimensions | A-ANNO-DIMS | A-ANNO-DIMS |
| Grids | A-GRID | S-GRID |
Common Mistakes to Avoid
Summary: Issue ← Cause ← Fix
| Symptom | Likely Cause | Fix |
|---|---|---|
| Hairline lines | "Thin Lines" ON or bad driver | Toggle off; use built-in PDF export |
| Wrong scale | "Fit to page" or paper mismatch | Set Zoom to 100%; match paper size |
| Clipped drawing | Print range set to "Current Window" | Use "Selected Views/Sheets" |
| Missing DWG layers | Export setup layer mapping | Edit export setup; use AIA standard |
| Blank pages | Viewport not placed on sheet | Open sheet; drag view onto it |
Question 1 of 5
A student prints a floor plan from Revit and all lines appear as identical hairlines with no visual hierarchy. What is the most likely cause?
Question 2 of 5
To ensure a drawing prints at exact scale, what must the Zoom setting in Revit's Print Setup be configured to?
Question 3 of 5
When exporting a Revit floor plan to DWG, some walls are missing in AutoCAD. Which setting should you check first?
Question 4 of 5
A Revit title block is sized for Arch D (24" x 36") paper. The printer is loaded with 11" x 17" (Tabloid) paper with "Fit to page" enabled. Approximately what percentage of the intended scale will the output be?
Question 5 of 5
Which Revit menu path leads to the lineweight table where pen numbers are mapped to physical thicknesses?