01 / 22

Placing & Swapping
Families

Master the art of loading families, placing instances in your model, and swapping types to iterate designs quickly in Autodesk Revit.

Autodesk Revit

What Is a Family?

In Revit, a Family is a reusable template that defines the geometry, parameters, and behavior of a building element: doors, windows, furniture, columns, fixtures, and more. Every object you place in a model is an instance of a family.

Family (.rfa) Door_Single Geometry Parameters Behavior Type A 36" x 84" Single Flush Type B 30" x 80" Single Panel Instance Instance

System vs Loadable Families

Revit families fall into two major categories. Understanding which is which determines how you load, place, and swap them.

System Families
Built into every Revit project: walls, floors, roofs, ceilings, stairs. You cannot load them from external files: they are always available.
Loadable Families
Stored as .rfa files: doors, windows, furniture, fixtures, equipment. You must load them into the project before placing instances.

Why Families Matter

Consistency
One family change updates every instance across the project instantly.
Efficiency
Swap types without re-drawing: iterate sizes and materials in seconds.
Accuracy
Scheduled data (cost, size, manufacturer) is embedded and always current.

The Family Hierarchy

Category e.g. Doors Family e.g. Door_Single Type: 36" x 84" Type: 30" x 80" Type: 24" x 80" Instances (placed in model)

Loading a Family into Your Project

1
Insert tab on the Ribbon: click Load Family.
2
Browse to the .rfa file: Revit ships with a default library, or use your firm's library.
3
Select the file and click Open: the family and its types are now available in the project.
4
The family appears in the Project Browser under its category (Doors, Furniture, etc.).

Placing an Instance

1
Go to the Architecture (or relevant) tab and pick the component tool, or select the family in the Project Browser.
2
Choose the desired Type from the Type Selector in the Properties palette.
3
Click in the canvas to place the instance. For hosted families (e.g., doors), click on the host element (a wall).
4
Press Esc or click Modify to finish placement.

Type vs Instance Parameters

Type Parameter Instance Parameter
Scope Shared by all instances of that type Unique to each placed instance
Example Width, Height, Material Sill Height, Head Height, Offset
Edit location Type Properties dialog Properties palette (per selection)
Change impact Updates every instance of the type Affects only the selected instance

Swapping Types

Once an instance is placed, you can change its type without deleting and re-placing. This is called Type Swapping and is one of Revit's most powerful workflows.

1
Select the instance(s) you want to change.
2
In the Type Selector drop-down (Properties palette), pick a different type from the same family.
3
The geometry, dimensions, and type parameters update instantly while the instance stays in the same location.

The Swap Workflow

Before 36" x 84" Swap After 72" x 84" Double TYPE SELECTOR 36" x 84" Single 72" x 84" Double ✓ 30" x 80" Single

Cross-Family Swapping

Sometimes you need to swap an instance to a different family entirely: for example, replacing a single-flush door with a panel door from a different family file.

1
Load the new family into the project (if not already loaded).
2
Select the instance(s) to change.
3
Open the Type Selector: it now lists types from all loaded families within the same category.
4
Pick the new family type. The instance geometry updates to the new family.

Bulk Operations

Revit provides powerful tools for changing many instances at once. This saves enormous time on large projects.

Select All Instances
Right-click an instance, choose Select All Instances (In Entire Project or Visible in View). Then swap via the Type Selector.
Match Type (MA)
Press MA on the keyboard. Click the "source" element, then click each "target" element. Targets adopt the source's type.
Schedules
In a schedule view, select rows and change the Type column. All corresponding instances update across the model.

Example 1: Loading a Chair

INSERT Load Family Open Family File Furniture / Seating / Chair_Task.rfa Chair_Lounge.rfa Chair_Dining.rfa Open Project Browser Families Furniture Chair_Task Standard Ergonomic

Example 2: Placing a Door on a Wall

Wall (Host) Click to place Properties Type Selector: 36" x 84" Single Sill Height: 0' - 0" 3' - 0"

Example 3: Swapping After Placement

The client requests all 36-inch single doors on Level 1 be changed to 30-inch single doors. Here is the fastest approach:

1
Select one 36" single door on Level 1.
2
Right-click and choose Select All Instances → In Entire Project.
3
In the Type Selector, choose 30" x 80" Single.
4
Every 36" single door across the project updates to 30" instantly. Walls re-heal the smaller openings automatically.

Common Mistakes

✕ Wrong Host
Trying to place a hosted family (door) in open space. Always click on a valid host element.
✕ Not Loading First
Expecting a family to appear in the Type Selector before it has been loaded into the project.
✕ Cross-Category Swap
Attempting to swap a Door for a Window: these are different categories and cannot be swapped.
✕ Editing Type Instead of Instance
Changing a Type parameter when you meant to change only one instance's position or offset.

Summary Table

Action How Key Detail
Load Family Insert tab → Load Family Browses for .rfa files
Place Instance Architecture tab → Component tool Hosted families need a host
Swap Type (same family) Select → Type Selector Geometry updates in place
Swap Type (different family) Load new family → Type Selector Must be same category
Bulk Swap Select All Instances → Type Selector Entire project or visible view
Match Type MA shortcut Click source, then click targets

Question 1 of 5

Which tab on the Ribbon contains the Load Family button?

Question 2 of 5

A hosted family such as a door can only be placed on:

Question 3 of 5

You change the Width parameter in the Type Properties dialog. What happens?

Question 4 of 5

What keyboard shortcut activates the Match Type tool?

Question 5 of 5

You want to replace all single-flush doors with a panel door from a different family. What must you do first?