Nested Families
in Autodesk Revit
Learn how to embed one family inside another to build complex, flexible, and reusable BIM components from simple building blocks.
What Is a Revit Family?
In Revit, a family is a reusable building component: a door, a window, a piece of furniture, a light fixture, or even a custom detail element. Every object you place in a Revit project is an instance of some family.
What Is a Nested Family?
A nested family is a family that has been loaded inside another family (the host family). The nested component becomes a child element within the host, bringing its own geometry, parameters, and behaviour along with it.
Why Use Nested Families?
The Core Principle
Shared vs Non-Shared Parameters
When a nested family has its own parameters, the host family can either expose or hide them from the project. This distinction is controlled by shared parameters.
Nested Families vs Modelling In-Place
| Nested Family | Modelled In Host | |
|---|---|---|
| Reusability | ✓ Reusable across hosts | ✕ Tied to one host |
| Independent editing | ✓ Own .rfa file | ✕ Edit inside host only |
| Swappable | ✓ Type-swap at instance level | ✕ Must re-model |
| File size | Moderate | Smaller (no extra .rfa) |
| Complexity limit | Good for complex parts | Best for simple geometry |
How to Nest a Family: Step by Step
Example 1: Door with a Nested Handle
Example 2: Light Fixture with Nested Lamp
Example 3: Desk Assembly with Multiple Nested Parts
Linking Parameters Between Levels
A powerful feature of nesting is parameter association: you connect a host family parameter to a nested family parameter so they stay synchronised.
Controlling Visibility of Nested Parts
Sometimes you want a nested family to appear only in certain views or detail levels. Revit gives you two tools for this:
Type Swapping: The Power of Nesting
One of the most powerful features of nested families is type swapping: loading multiple types of a nested family and letting users choose which one to display.
Common Mistakes to Avoid
Summary: Nested Families at a Glance
| Concept | Key Detail |
|---|---|
| What it is | A family loaded inside another family |
| File format | .rfa loaded into .rfa |
| Parameter linking | Associate Family Parameter button |
| Type swapping | Family Type parameter in host |
| Visibility control | Yes/No parameter or Detail Level |
| Shared parameters | Required for scheduling nested data |
| Recommended depth | 2-3 nesting levels maximum |
Question 1 of 5
What is a nested family in Autodesk Revit?
Question 2 of 5
Why would you use a shared parameter on a nested family?
Question 3 of 5
What is the primary benefit of type swapping in nested families?
Question 4 of 5
What is the recommended maximum nesting depth for Revit families?
Question 5 of 5
You place a nested handle family inside a door host, but when you change the door's width, the handle stays in the same position. What is the most likely cause?