01 / 21

Materials in
Autodesk Revit

Learn to assign and edit materials in Revit, and understand the difference between appearance assets and physical assets.

Autodesk Revit

What Are Materials in Revit?

In Autodesk Revit, a material is a data container that defines how a building element looks, how it behaves structurally, and how it performs thermally. Every wall, floor, roof, and component in your model can have materials assigned to it.

Why Materials Matter

Visualization
Materials control how your model looks in 3D views, renderings, and walkthroughs.
Analysis
Physical and thermal data feed into structural and energy analysis tools.
Documentation
Materials drive hatch patterns and surface patterns in plan and section views.

The Material Browser

The Material Browser is Revit's central hub for creating, editing, and organizing materials. Open it from the Manage tab or by pressing the material swatch in any element's type properties.

Material Browser PROJECT MATERIALS Concrete, Cast-in-Place Brick, Common Glass, Clear Steel, ASTM A36 Wood, Oak Appearance Physical Thermal Preview Color RGB 180, 180, 180 Surface Pattern Concrete Transparency 0% Select

Anatomy of a Material

Material "Concrete, Cast-in-Place" Identity Name, Description, Class Appearance Color, Texture, Gloss Physical
Density, Strength, \(E\)
Thermal Conductivity, Specific Heat

Appearance vs Physical Assets

The most common source of confusion in Revit materials is the difference between the Appearance Asset and the Physical Asset. They serve entirely different purposes and are edited independently.

Appearance Asset
Controls how the material looks in rendered views: color, texture maps, reflectivity, transparency, bump maps, and self-illumination.
Physical Asset
Stores engineering properties: Young's Modulus, Poisson's Ratio, density, yield strength. Used by structural analysis tools.

Key Distinctions at a Glance

Appearance Asset Physical Asset
Purpose Visual rendering Structural analysis
Key Properties Color, texture, gloss Density, modulus, strength
Affects 3D views, walkthroughs Analytical models, calculations
Can Be Swapped? Yes Yes
Required? Always present Optional (can be "None")

Inside the Appearance Asset

1
Color: The base RGB value or image texture applied to the surface.
2
Reflectivity / Glossiness: Controls how shiny or matte the surface appears under lighting.
3
Transparency: Determines how much light passes through (essential for glass materials).
4
Bump Map: A grayscale image that simulates surface texture without changing geometry.
5
Surface and Cut Patterns: Hatch patterns shown in plan, section, and elevation views.

Inside the Physical Asset

Physical assets store engineering properties used for structural and energy analysis. Key properties include:

Young's Modulus
Stiffness of the material: resistance to deformation under load. Measured in \( \text{GPa} \) or \( \text{psi} \).
Density
Mass per unit volume, e.g. \( \rho = 2400\ \text{kg/m}^3 \) for concrete. Critical for dead load calculations.
Poisson's Ratio
The ratio of lateral strain to axial strain: \( \nu = -\frac{\varepsilon_{\text{lat}}}{\varepsilon_{\text{axial}}} \). Typically 0.1 to 0.5.

How to Assign a Material

1
Select the element in your model (wall, floor, column, etc.).
2
Open Type Properties by clicking "Edit Type" in the Properties palette.
3
Click the material swatch next to the "Structural Material" or layer material parameter.
4
Browse or search in the Material Browser for your target material.
5
Select and apply. Click OK to assign the material. The element updates immediately.

Editing a Material

To edit, open the Material Browser (Manage tab), select the material, then switch between tabs to modify each asset independently:

Select Material Choose Tab / Asset Edit Properties Apply OK Changes propagate to ALL elements using this material

Example: Creating a New Material

Let's create a custom "Polished Marble" material from scratch.

1
Open the Material Browser from Manage > Materials.
2
Click "Create New Material" (the sphere icon at the bottom of the list).
3
Name it "Polished Marble" and set the Class to "Stone".
4
Appearance tab: Set color to white, add a marble texture image, set glossiness to 90%.
5
Physical tab: Set density to \( 2700\ \text{kg/m}^3 \) and compressive strength to \( 60\ \text{MPa} \).

Example: Swapping an Appearance Asset

Suppose your "Concrete, Cast-in-Place" looks too plain in renderings. You can swap its Appearance Asset without touching its physical data.

Before Appearance Default Grey, Matte Physical
\( \rho = 2400\ \text{kg/m}^3 \)
Thermal
\( k = 1.046\ \text{W/m·K} \)
Swap After Appearance Exposed Aggregate Texture Physical
\( \rho = 2400\ \text{kg/m}^3 \)
Thermal
\( k = 1.046\ \text{W/m·K} \)

Example: Materials in Compound Walls

A typical exterior wall has multiple layers, each with its own material. The Edit Assembly dialog lets you assign materials per layer.

EXTERIOR Brick Veneer Air Gap Insulation Sheathing Wood Stud + Cavity Gypsum Board INTERIOR Each layer = separate material assignment

Common Mistakes

✕ Editing Shared Materials
Editing a material without duplicating it first changes the material for every element in the project that uses it.
✕ Confusing Appearance with Physical
Changing the color or texture does not update structural properties. Your rendering may show marble, but analysis still reads default concrete.
✕ Ignoring Surface Patterns
Forgetting to set surface and cut patterns means plan views show blank fills, making documentation incomplete.

Summary: Material Assets

Asset Tab What It Controls Example Properties
Identity Metadata and classification Name, Description, Class, Comments
Appearance Visual rendering and patterns Color, Texture, Glossiness, Bump Map
Physical Structural engineering data Density, Young's Modulus, Yield Strength
Thermal Energy analysis data Conductivity, Specific Heat, Emissivity

Question 1 of 5

Which tab in the Material Browser controls how a material looks in rendered 3D views?

Question 2 of 5

You change the Appearance Asset of "Concrete, Cast-in-Place" to show an exposed aggregate texture. What happens to its Physical Asset?

Question 3 of 5

In a compound wall with four layers, how are materials assigned?

Question 4 of 5

What should you do before editing a material that is used by multiple elements in your project?

Question 5 of 5

Which property is stored in the Physical Asset, not the Appearance Asset?